How to Do Hand Lettering on Procreate
StyleFrame Team8 min read
Hand lettering on Procreate comes down to five steps: set up a canvas at the right size and resolution, sketch the composition, tune a brush with stabilization, ink the letterforms on separate layers, then add color and shadow before exporting. Start with a loose thumbnail sketch, treat the words as an illustration rather than text on a page, and use an Apple Pencil for pressure-sensitive line weight. For motion work, the extra step is organizing layers so each letter or word can be animated later.
What You Need Before You Start
Procreate runs only on iPad, so you need an iPad that supports Apple Pencil. A finger works for experiments, but pressure sensitivity is what gives you thick downstrokes and thin upstrokes, so a Pencil matters for serious lettering. Procreate is a one-time purchase rather than a subscription, which makes it an easy addition next to your After Effects or Cinema 4D stack.
Optional extras include a matte screen protector for more friction and stroke control, and a stand if you work in long sessions. Neither is required.
Set Up the Canvas for Your Destination
Decide where the lettering will end up before you open a new canvas, because resolution is hard to fix later.
- Print or stills: a custom canvas such as 3000 × 2000 px at 300 DPI is a solid starting point.
- Motion graphics: match the aspect ratio of your composition. A 16:9 canvas that is at least as large as your delivery frame keeps you from scaling up in After Effects. If you plan to scale lettering up in a comp, draw larger than the final frame.
- Color profile: choose RGB for anything that lives on screen. CMYK is for print.
Procreate caps your layer count based on canvas size and device, so a bigger canvas means fewer layers. If you want a separate layer for every letter, balance canvas size against how many layers the piece needs.
Sketch the Composition First
Skipping the sketch is a common reason lettering looks flat. Treat the phrase as an illustration, not a line of text.
- Write the phrase out. Use a pencil-style brush and a bright color on a low-opacity sketch layer so you can see it clearly.
- Mark the key words. Underline the words that carry the meaning. These decide your hierarchy and which words get the largest or most expressive treatment.
- Thumbnail several layouts. Put words on different lines, try the phrase inside a rectangle or a curve, and mix styles such as a script word against block capitals. Work fast and keep it ugly. You are only deciding what goes where.
- Pick one and move it to a new layer. Select the sketch, copy and paste it onto its own layer, center it, and lower its opacity to use as a guide.
For structured layouts such as block lettering, draw guide lines with QuickShape. Hold the line at the end of the stroke until it snaps straight. If a word comes out wonky, the Warp tool in the Transform options can straighten it without redrawing.
Choose and Tune Your Brush
Not every brush suits lettering. For script or calligraphy-style work you need a brush that responds to pressure with thin upstrokes and thick downstrokes. Procreate ships with several inking brushes, and many letterers add third-party sets.
Use Stabilization to Smooth Curves
Procreate is sensitive enough that curves can pick up a slight shake. Open the brush settings, find Stabilization (also called StreamLine), and raise the amount. Somewhere around 60 percent is a common starting point. Go much higher and the stroke stops following your pencil path, so it feels disconnected from your hand.
Stabilization changes how a brush behaves. A heavily stabilized brush feels wrong for natural handwriting, while a sketching brush with none follows your hand closely. If a brush seems to be overcorrecting, lower the value.
Build a Custom Brush in Brush Studio
If the stock brushes don't give you the stroke you want, open Brush Studio from the brush panel with the plus icon. A brush has two main ingredients:
- Shape: the stamp that defines the brush's footprint, which dictates how the line looks.
- Grain: the texture inside the stroke. For clean lettering you can leave this blank.
Different lettering styles benefit from different brushes. Modern brush script, copperplate, and blackletter each want their own pressure behavior and edge, so one all-purpose brush rarely covers everything. Start by modifying a stock brush and adjusting its pressure response until thin and thick strokes feel natural.
Ink the Letterforms
Create a new layer above your sketch and trace your composition. Zoom in for tight curves and zoom out regularly to judge the overall shape and spacing.
Control Stroke Starts and Ends
Beginners often struggle with ugly terminations. A stroke can end with a small bump or a sharp point instead of a clean edge. Two habits help:
- Pause briefly before lifting the pencil, then lift straight up or back into the stroke rather than dragging away from it.
- Pause briefly before starting a stroke if you want a flat top. If you want a tapered entry, use gradual pressure instead.
Keep Your Layers Organized
For static pieces, one inking layer is fine. If the lettering will be animated, keep a layer per word or per letter, and name your layers clearly. Put flourishes, underlines, and decorative elements on their own layers so they can enter on separate beats. Leave the sketch layer hidden but intact so you can return to it if the client requests a different composition.
Fix Spacing and Shapes
Look at the negative space between letters, not the letters themselves. Uneven gaps are the quickest tell of amateur lettering. Select a letter or word and use Transform to nudge it. Use Warp for subtle shape corrections instead of redrawing a whole word.
Add Color, Shadow, and Detail
Once the line work is solid, build the finish on separate layers so it stays editable.
- Fill color: lock the inking layer with Alpha Lock, or use a clipping mask above it, to recolor without bleeding outside the letters.
- Shadows and depth: duplicate the lettering, offset it, and fill it with a darker color on a layer below. Perspective and layering add depth and variation to the letters.
- Texture: use a clipped texture layer for grain, halftone, or paper effects instead of painting texture into the letters.
- Ligatures and flourishes: add these last, so you know where they need to connect.
Export for a Motion Pipeline
How you export decides how much freedom you have afterward.
- PSD: exports your layer structure, so you can keep each letter or word as an independent layer when you bring it into After Effects.
- PNG: exports a flattened image with transparency if you hide the background layer. This works well for a single logo-style asset.
- Hidden background: always turn off any background color before exporting if you need a transparent result.
For anything with timing control, easing, or compositing, bring the layers into After Effects and animate there with a shape layer for stroke reveals or a track matte.
Taking Hand Lettering Further With Styleframe
Procreate gets you the drawn letterforms. Styleframe, an AI video and motion tool built for artistic control, helps once you want those letters to move or change style.
A few practical uses that match a lettering workflow:
- Frames-to-Video: use keyframes, such as your lettering at two or three stages of a reveal, and let Styleframe generate the motion between them. You decide where the key poses sit, and the generation follows them.
- Restyle and Ink-and-Paint: use your hand lettering or a related illustration as a style reference so other footage or frames pick up its linework and color character.
- Remove Background: isolate lettering that you photographed, such as chalk or paint on a surface, so it can go over other footage.
- 2D-to-3D and Turntable: explore dimensional versions of a flat lettering design and rotate it around for look development.
You can try several variations from the same references. You keep your pipeline and use Styleframe for the generative step.
Common Mistakes to Avoid
- Starting without a sketch. Spend your time on composition first, where changes are cheap.
- Cranking stabilization too high. Strokes will drift from your pencil path.
- Working on a canvas that's too small. Upscaling raster lettering in a comp softens the edges.
- Merging everything. Flattening layers early removes your options for animation and revisions.
- Ignoring spacing. Even good letterforms look weak with uneven gaps.
- Copying references too closely. Use reference images for inspiration about structure and style, then draw your own letterforms.
A Simple Practice Routine
You don't need good handwriting to letter well, because the process is about construction, not penmanship. Pick a short phrase, thumbnail three layouts, ink the best one on a clean layer, and add a single shadow. Repeat with a different style each time: block, serif, script. After a few rounds you will have a small style library and a repeatable process, which is what makes lettering fast enough to use in client work. Once that is in place, bring the layered files into After Effects, or use Styleframe to extend the same looks into motion.