How to Do Hair in Procreate
StyleFrame Team8 min read
To paint hair in Procreate, block in the overall shape and flow first, fill it with a dark base color, then build lighter strands in layers on top: mid-tones, highlights, and fine flyaways. Use a tapered or textured brush, clip each layer to the base with a Clipping Mask or Alpha Lock, and soften the strand ends with a soft brush so the hair reads as clumps instead of individual lines. Work from big shapes to small details, and keep every stage on its own layer so you can revise or export it later.
Start With Hair Structure, Not Strands
Most hair that looks wrong is wrong because of structure, not rendering. Before you touch a brush, decide three things.
Where the hair originates. Every hairstyle grows from a starting point or line, usually the part or the crown. Strands flow away from it, and your first sketch lines should show that direction.
How the hair groups into clumps. Hair moves in locks, not as thousands of separate threads. Think of each lock as a rounded, banana-like ribbon with a thick middle and a tapered end. More locks means more detail, so choose a number that suits your style.
What the hair type does. Straight hair lies close to the head and reflects long, smooth highlights. Wavy hair follows S-shaped curves. Curly and coily hair forms spirals or tight coils that build a larger overall silhouette. Draw that silhouette first and let the curls follow it.
Keep a reference photo or an artist's work beside your canvas while you paint. Studying how light travels across a real head of hair saves more time than any brush pack.
Set Up Your Canvas and Brushes
Work at a high resolution if the art might end up in a video timeline. A 4K-wide canvas, or larger if you plan to crop or push in, is much safer than upscaling later. Create a document in the color profile you will use downstream (sRGB for most video work).
You can do all of this with Procreate's stock brushes:
- 6B Pencil for the loose sketch.
- Technical Pen for clean outlines if you want to flood-fill.
- Round Brush or Brush Pen for the main strand work.
- Soft Airbrush for blending and glow.
- A blending brush with a textured or soft brush for pulling strand ends.
Custom hair brushes are optional. They make tapered strokes faster, but the technique below works without them.
Step 1: Sketch the Silhouette and Flow
Draw the full head first, even if part of it will be covered. A bare head helps you judge how much volume the hair has and keeps the proportions honest.
On a new layer, mark the starting point or part, then draw the overall shape of the hair with a few simple lines. Add the large locks as flowing curves. Don't worry about neatness. Drop this layer's opacity to around 30% once you are ready to paint so it guides you without competing with the color.
Decide at this stage which locks sit in front and which sit behind. This matters when you shade, because front locks cast shadows onto the ones beneath.
Step 2: Fill a Dark Base Shape
Create a new layer beneath your sketch. Choose a color darker than the hair's final tone, since this will become your shadow layer. Fill the silhouette with it, either by painting directly or by outlining and dragging the color in with ColorDrop. If you use ColorDrop, make sure your outline is fully closed, or the fill will leak.
Clean the edges now. A crisp silhouette makes every later step look more polished, and it is much easier to correct while the shape is still a flat fill.
Starting dark has a practical advantage: you never need to paint separate deep shadows. The gaps between lighter strands will show the base color and read as depth automatically.
Step 3: Build Mid-Tones in Strand Shapes
Create a new layer above the base and turn on Clipping Mask so anything you paint stays inside the hair shape. Pick a color one or two steps lighter than the base.
Paint wide, tapered strokes that follow the flow lines. Think in clumps: each stroke should hint at a lock, with a thicker root or middle and a thin end. Increase brush size for these larger clumps. Let strokes overlap and vary their length so the pattern doesn't look combed.
If the color feels too dark or too saturated once it's down, turn on Alpha Lock for that layer and brush over it with a Soft Airbrush in a different tone. Alpha Lock changes the color without touching the shape, so you can fine-tune mood and temperature without repainting.
Step 4: Add Light With Thinner Strands
Create another layer and choose a lighter color. Now switch to a smaller brush size and paint thinner strands along the same flow lines, concentrating them where light hits: the top of the head, the curve of each lock facing the light, and the edges of waves.
Some practical rules:
- Keep the light source consistent. Highlights belong on the surfaces facing the light, not scattered randomly.
- Vary pressure. Start each stroke lightly, press in the middle, and lift at the end for a natural taper.
- Don't cover everything. The mid-tones and dark base should remain visible. Highlights are accents.
- Follow form. On curls, the highlight wraps around the curve. On straight hair, it forms a band that bends with the skull's shape.
Step 5: Find the Planes of the Head
A common reason hair looks flat is that the volume has no planes. Hair sits on a rounded form, so the top of the head catches light, the sides turn away, and the underside falls into shadow. Block these large value shifts first. A simple approach is to paint a soft shadow on its own layer, clipped to the hair, over the side and underside, then a gentle light on another layer on the top. Layer blend modes can help here.
Once the big shapes read as 3D, the strand work sits on top of a believable form instead of trying to create it.
Step 6: Blend the Start and End Points
Sharp, hard-edged strands everywhere make hair look wiry. Go back to the mid-tone layer and use a blending brush with a soft airbrush to blur where strands begin and end. Pull gently along the flow direction rather than across it.
Keep some edges crisp. Hard edges near the highlight and soft edges in the shadow give the hair contrast and keep it from looking airbrushed. Decide where your sharpest edge is, then let the rest fall off from there.
Step 7: Add Shine, Flyaways, and Edge Detail
Detail comes last and should be sparing.
Shine. For glossy hair, add a narrow highlight band on a new layer using a pale tint of the hair color, not pure white. Break it up with a few eraser strokes so it follows the strand pattern. Matte or coily hair needs far less specular, and more soft, diffuse light.
Flyaways and baby hairs. Create a layer at the very bottom of the hair group and paint thin, curved strands around the hairline, ends of curls, and edges of the silhouette. Placing them beneath the main hair makes them look like they grow from underneath. Use a thin brush and a color close to the mid-tone.
Texture pass. If the result still looks too clean, add a few random strokes over the top in mid-tone and shadow colors. A small amount of irregularity does more than another round of rendering.
Organize Layers for Production
If your hair art is headed into After Effects, a layered file is far more useful than a flat image. Keep these as separate layers or groups:
- Base shadow fill
- Mid-tones
- Highlights
- Shine
- Flyaways
- Outline or sketch (hidden)
Name them clearly and export them as layered files or transparent images. In After Effects, you can then offset or animate each layer independently for subtle parallax, wiggle the flyaways with an expression, or color-grade the highlights separately. For short frame-by-frame loops, such as a lock of hair swaying, animating the layers by hand can work, though long or complex movement is better handled in a compositing tool.
Where Styleframe Fits After the Painting
Procreate is great for painting a hairstyle by hand. Moving that hair, or restyling it, is where a different tool helps. is an AI video and motion tool. You can bring in your own painted reference images so the hair you painted stays the source of truth.
As with any generative tool, results depend on the quality of your references and keyframes, so expect to refine rather than get a final shot on the first try.
Common Mistakes to Avoid
- Painting individual strands too early. Establish flow, clumps, and form first.
- Using pure black or white. Tinted darks and lights keep the hair natural.
- Square or blunt strand ends. Taper everything, even in stylized work.
- Ignoring direction. Strokes that cross the flow make hair look scribbled.
- Overdoing highlights. Too many bright strands flatten the form.
- Flattening too soon. Keep layers until the image is approved.
Quick Workflow Recap
- Choose a reference and identify the starting point and hair type.
- Sketch the head and the large flow lines.
- Fill a dark base shape and clean the edges.
- Add mid-tone clumps on a clipped layer.
- Add thinner, lighter strands where light hits.
- Check planes and large shadows for volume.
- Blend strand starts and ends, keeping some crisp edges.
- Add shine, flyaways, and final texture.
- Export organized layers for compositing or animation.
Hair rewards patience and restraint. Get the shape and flow right, layer from dark to light, and add detail only where it supports the form. Do that consistently and your hair will hold up whether it stays a still illustration or becomes part of a moving shot.