How to Do Filters in Procreate
StyleFrame Team8 min read
To use filters in Procreate, tap the Adjustments (magic wand) icon in the top bar, choose a filter such as Gaussian Blur, Noise, or Sharpen, then drag your finger across the canvas to set the amount. Switch between Layer mode (affects the whole layer) and Pencil mode (paints the effect locally with an Apple Pencil) from the small triangle next to the percentage readout. Procreate has no preset "Instagram-style" filters, so a finished filter look is usually built by stacking filters, color adjustments, and blend modes.
Where Filters Live in Procreate
The Adjustments icon is the magic wand in the top menu bar. Tap it and the menu splits into two groups:
- Adjustments handle color: Hue, Saturation, Brightness, Color Balance, Curves, and Gradient Map are the main ones.
- Filters manipulate pixels and add special effects: blurs, sharpening, noise, Liquify, Clone, and more.
Older versions of Procreate listed seven filters at the top of the menu. Current versions list 11 filters in the lower half, so your menu may look slightly different depending on your build.
Both groups act on your current layer. Select the layer you want to change before you open the menu. If the wrong layer is active, you'll see nothing happen, or you'll alter the wrong element. This is a common beginner mistake.
Step-by-Step: Apply a Filter to a Layer
- Select the layer in the Layers panel.
- Tap the Adjustments icon.
- Tap a filter, for example Gaussian Blur.
- Drag your finger left or right across the canvas. The percentage in the top bar shows the intensity.
- Lift your finger when you're happy with the intensity.
Color adjustments such as Curves or Color Balance work a little differently. You activate them and then use the toolbar at the bottom of the screen, rather than a simple finger-drag gesture.
Filters You'll Use Most
- Gaussian Blur softens the layer evenly. Useful for depth-of-field faking, soft glows (on a duplicate layer), and background separation.
- Motion Blur smears pixels in the direction you drag, which suggests speed.
- Perspective Blur radiates from a center point you place. It works in Positional mode (outward in all directions) or Directional mode (a single direction), which suits zoom and blast effects.
- Sharpen pushes edge detail, with the strongest effect on high-contrast edges.
- Noise adds grain, handy for film-stock or newsprint texture.
- Liquify warps pixels with Push, Twirl, Pinch, Expand, Crystals, and Edge modes.
- Clone paints one part of the image onto another.
Layer Mode vs Pencil Mode
When you pick a filter or adjustment, a drop-down appears in the top bar next to the percentage. Tap the small triangle to choose Layer or Pencil.
Layer mode applies the effect across the entire layer. This is the right choice for global blur, grain, or color shifts.
Pencil mode lets you paint the effect with a brush onto specific areas of the layer. A few details worth knowing:
- Pencil filters require an Apple Pencil.
- A sparkle appears on the brush icon while you're in Pencil mode. Any brush you pick now paints the filter effect rather than pigment.
- The Smudge and Erase tools also work with a Pencil filter, so you can soften or remove parts of the effect you've painted. They show a sparkle too.
- Liquify and Clone skip this choice and always run as Layer filters.
You can switch modes mid-adjustment. A practical pattern is to apply a Gaussian Blur across the full layer and then flip to Pencil mode to touch up isolated areas, or to paint a Sharpen only on the focal point of the image.
Building a "Filter Look" With Adjustments and Blend Modes
Because Procreate doesn't ship one-tap look presets, artists assemble looks manually. The method is closer to compositing than to a photo app, which should feel familiar if you grade in After Effects or Nuke.
Start From a Flattened Duplicate
Work on a copy so the original stays untouched. Flatten your artwork into a single layer (or copy all visible layers and paste them as a new layer), then duplicate that. A common way to capture the current state: three-finger swipe down, choose Copy All, swipe down again, and Paste. You get a merged layer on top of your stack that you can toggle on and off to compare.
Add Contrast With Stacked Blend Modes
- Duplicate the flattened layer.
- Set the blend mode of the duplicate to something like Color Dodge and drop its opacity to zero.
- Raise opacity slowly. Often 1–2% is enough to lift highlights.
- Duplicate the original again, place it on top, and set it to Color Burn. Bring opacity up the same way to deepen the darks.
The combined effect is increased contrast, built from two layers you can adjust, hide, or delete. A final opacity change on the grouped result sets how strong the "filter" is overall.
Change Color With Adjustments
On another duplicate layer:
- Grayscale: open Hue, Saturation, Brightness and pull saturation all the way down. Reduce the layer's opacity to bleed back as much color as you want.
- Color enhancement or stylization: try Color Balance, Curves, or Gradient Map. Gradient Map is especially useful for duotone and tritone treatments.
Treat each adjusted duplicate as an adjustment layer in your own mind: keep them separate, name them, and group them. Adjustments change the layer they're applied to, so duplicating before you adjust is how you preserve flexibility.
Texture and Grain Tricks
Noise is the filter that does the most to make digital art feel photographic or printed. To keep it controlled:
- Put grain on its own layer, filled with a neutral color, rather than baking it into your art.
- Apply Noise to that layer, then use a blend mode like Overlay or Soft Light to blend it in.
- Lower the layer opacity until the grain is only just visible. Over-grained work looks cheap quickly.
Pair that with a slight Gaussian Blur on a duplicate set to a Lighten-type blend mode and you get a soft bloom around highlights.
Filters in Procreate Dreams
If you animate in Procreate Dreams, filters work differently in two places.
Drawing Filters in Draw & Paint Mode
Tap the Filters button at the top and choose from the drop-down. Slide across the canvas to set intensity (HSB is the exception). Tapping the canvas opens a menu with Apply, Undo, Reset, Cancel, and Preview (press and hold to see your content before the change).
The set here includes:
- Hue, Saturation, Brightness. Dragging saturation fully left gives a quick grayscale.
- Lens Blur, which simulates camera blur. Brightness produces bloom-like effects and contrast intensifies blur around color boundaries. It's supported on M-series iPads.
- Gaussian Blur
- Noise, with Clouds, Billows, and Ridges types, plus Scale, Octaves, and Turbulence controls. In the Advanced menu, Additive limits noise to existing pixels (turn it off to texture empty areas), and Multichannel gives colored noise.
- Sharpen
Keyframed Filters on the Timeline
On the timeline, select content, tap the playhead to open the Action menu, and choose Filter. The available filters are Opacity, Gaussian Blur, Sharpen, Noise, and HSB. To fade something out:
- Position the playhead where the fade starts.
- Tap Filter → Opacity and set 100%.
- Move the playhead to the end point.
- Tap Filter → Opacity again and set 0%.
- Play or scrub to check it.
Keyframes are affected by easing, so confirm the curve before you judge the motion. Because these are keyframed, they don't permanently change your original content, and you can edit or undo them later. You can also apply filters live using Perform, timing them to the rest of the animation.
Common Problems and Fixes
- Nothing seems to change: check that the right layer is selected and that you haven't left the intensity at 0%.
- Pencil option is missing: you need an Apple Pencil, and Liquify and Clone never show the option.
- The effect is too strong and can't be undone later: duplicate the layer before applying, and lower the duplicate's opacity afterward.
- Blur has hard edges at the layer boundary: apply the filter to a layer with enough surrounding empty space, or work on a flattened full-canvas copy.
- Filters feel inconsistent across a series of frames: that's a limit of manual, per-frame work. See the next section.
Where Procreate Filters Stop and a Motion Pipeline Starts
Procreate's filters are excellent for finishing stills, textures, and hand-drawn frames. They're raster effects applied by hand, though, so keeping one consistent look across hundreds of frames is laborious, and none of it replaces proper grading and compositing.
If your goal is a stylized look across moving footage, a reference-driven video tool may be worth exploring.
A workable pipeline for a Procreate artist moving into motion might look like this:
- Paint or design a key frame in Procreate, with your filter look (grain, color treatment, blur) dialed in by hand.
- Use that frame as a style reference in a reference-driven video tool, alongside keyframes and source clips, to carry the look through motion.
- Export an image sequence, and bring it into After Effects or Nuke for compositing, grading, and final grain.
The advantage is that you decide the look first, with the tools you already know, and use references and keyframes to direct it rather than hoping a prompt gets close.
Quick Reference
Once you've learned the Layer/Pencil distinction and the habit of duplicating before you adjust, filters in Procreate become a flexible, controllable part of your finishing process rather than a single button you press and hope for the best.