How to Do Eyelashes on Procreate
StyleFrame Team7 min read
To draw eyelashes in Procreate, sketch the lash line on its own layer, then flick tapered strokes outward with a pencil or fine-liner brush. Start with short, lightly curved lashes at the inner corner and make them longer and more curved toward the outer corner. Vary length, angle, and spacing, add a second layer of lashes for density, then darken the roots and add small highlights at the tips. You don't need a special eyelash brush. A standard brush with tapered pressure response is enough.
What You Need Before You Start
Eyelashes look wrong when the stroke has a blunt start or end. Natural lashes are thick at the root and thin at the tip, so your brush needs to respond to pressure in the same way.
Brush choice. Procreate's default inking and sketching brushes already work well. A pencil brush, a fine liner, or a tapered ink brush will all give you the root-to-tip taper you want. Many working illustrators paint lashes with the same brushes they use for the rest of the piece, so a dedicated lash set is a convenience, not a requirement.
Brush settings worth adjusting:
- Size: Use a small brush, and change size per area. The upper lashes can be a little heavier than the lower ones.
- Pressure curve: Confirm that the stroke tapers at the end. If it doesn't, adjust the brush's settings until it does.
- Opacity: A medium opacity lets overlapping strokes build up naturally rather than looking like flat black lines.
Canvas setup. Work large. Lashes are fine detail, and drawing them on a canvas that's too small forces you to zoom in and lose control of overall shape. If the art will end up in video, work at or above the resolution you'll deliver, and keep the canvas a standard video aspect ratio if it's a full frame.
Step-by-Step: Drawing Eyelashes in Procreate
1. Block in the eye on separate layers
Put the eye shape, iris, lids, and lashes on different layers. At minimum, give the upper lashes and lower lashes their own layers above the eyelid. This lets you erase, transform, or recolor lashes without touching the eye underneath, and it becomes essential if you plan to animate a blink later.
2. Define the lash line
On a new layer, draw the curve along the eyelid edge where the lashes will grow. Keep it light and use a color you can easily distinguish from your final line art. Treat it as a guide for the lash roots. Lashes grow from the edge of the lid, not from the skin above it, and getting this anchor point right is what makes them look attached.
3. Draw the upper lashes
Start at the inner corner and work outward:
- Inner corner: Short, fine lashes with minimal curve, angled mostly downward or slightly forward.
- Middle: Progressively longer, with a more pronounced upward curl.
- Outer corner: The longest lashes, sweeping outward and up, fanning slightly away from the eye.
Use quick flicking motions from root to tip. Starting the stroke on the lid and lifting off as you move outward gives the taper automatically. If your wrist fights the angle, rotate the canvas. Most people draw cleaner arcs in one direction.
Avoid uniform spacing. Lashes grow in clusters with gaps, and they cross each other. Deliberately vary the angle of neighbors by a few degrees.
4. Add the lower lashes
Lower lashes are shorter, finer, and sparser than the upper set. Use a smaller brush size and lighter pressure. They usually curve downward and slightly outward, with more even spacing and less dramatic curl. A common mistake is giving the lower lashes the same weight as the upper ones, which makes the eye look heavy or artificial.
5. Layer for density
Create another layer beneath or above the first set and draw a second row of lashes at slightly different angles, especially toward the outer corner. Lowering the opacity of this second layer can push it back visually, suggesting depth rather than a flat wall of lines. A few lashes that clump together or cross are more convincing than perfectly separated ones.
6. Shade the roots and highlight the tips
Paint color inside the existing strokes without spilling over:
- Roots: Go slightly darker at the base to create the appearance of thickness and shadow along the lid.
- Tips: Add a small lighter highlight to a handful of lashes, not all of them, to catch the light. Lighting should match the rest of the face.
- Shadow on the eye: Paint a soft, low-opacity shadow beneath the upper lashes on the eyelid and eyeball. This is often what makes lashes feel grounded in the scene.
7. Step back and refine
Zoom out to the size the image will actually be viewed. Check whether the overall lash shape reads as a smooth sweep or as separate sticks. Erase or reshape the strays that distract, and leave a few intentional outliers outside the main line for realism. Flip the canvas horizontally to catch asymmetry you've stopped seeing.
Adapting Eyelashes to Different Styles
Realistic. Many fine strokes, varied weight, shadow on the lid, and highlights on a few lashes.
Stylized or cartoon. Reduce the lashes to three to five bold, tapered shapes and treat them as a single silhouette. Draw them as filled, curved wedges rather than individual hairs. Consistency matters more than detail here, especially if the character will be redrawn many times.
Anime-influenced. Heavier upper lash line, thick at the outer edge, with a few extended flicks. Lower lashes are often suggested with small ticks or omitted entirely.
Graphic or flat design. Use solid shapes with no shading, drawn with a vector-like crisp brush at 100% opacity.
Should You Use a Custom Eyelash Brush?
Custom brushes can speed up repetitive work. A stamp-style lash brush places a cluster in one tap. The tradeoff is repetition: stamped lashes tend to look identical, and that's noticeable at animation or print scale. If you use one, treat it as a base layer and hand-draw variations on top. For most work, a good tapered default brush gives you more control.
Common Mistakes
- Lashes starting above the lid. They should emerge from the lid edge.
- Uniform length and curve. Real lashes vary, and the pattern changes across the eye.
- Straight lines. Each lash should have a gentle curve, even if subtle.
- Too many lashes at full opacity. It reads as a dark smear. Use layers and opacity to control density.
- Ignoring the viewing angle. In a three-quarter view, lashes on the far eye compress and overlap. Foreshorten them instead of copying the near side.
Preparing Procreate Eyelashes for Animation and Video
If you're a motion designer or animator, the lashes probably aren't the final deliverable. They're part of a character, a styleframe, or a looping asset that will land in After Effects, Premiere Pro, or a 3D package. A few habits make that handoff cleaner:
- Keep the lashes on their own layers, named clearly (for example,
lash_upper_open,lash_lower_open). - Draw blink states separately. Make an open, half-closed, and closed version of the eye with the lashes repositioned for each, rather than trying to distort one set.
- Export as layered PSD or transparent PNGs so the lashes stay separate in your compositing tool.
- Work at your delivery resolution, or higher, so fine lashes don't soften when scaled.
Quick Reference Checklist
- Use a tapered brush with pressure sensitivity.
- Put the lash line, upper lashes, lower lashes, and shading on separate layers.
- Go from short and straight at the inner corner to long and curved at the outer corner.
- Make lower lashes finer, shorter, and sparser.
- Layer a second set at a different angle for depth.
- Shade the roots and add tip highlights without spilling outside the strokes.
- Add a soft shadow under the lashes on the lid and eye.
- Export layered PSDs or transparent PNGs if the art is going into motion work.
Final Thoughts
Eyelashes in Procreate come down to a few controllable decisions: where the roots sit, how the length and curl change across the lid, and how much density and shadow you build up. Get the taper and layering right, and the specific brush matters far less. If the artwork is headed for animation, structure your layers for the blink from the start, and you'll save yourself a lot of rework in the compositing stage.