How to Do a Three Point Turnaround in Procreate
StyleFrame Team8 min read
Procreate has no built-in "three point turnaround" command. The phrase usually means a character turnaround with three views (front, three-quarter, and side), which you build with a 2D grid guide, matched horizontal landmarks, and layer groups. Set up a canvas with guides, draw the front view first, carry its proportions across to the other two views, and check consistency by flipping between them with Animation Assist. If you meant the driving maneuver (a three-point turn), that is a road skill rather than anything in Procreate, though you could illustrate it as a top-down diagram using the same guide tools.
What a three-point turnaround means in character design
A turnaround sheet shows one character from several angles so that animators, modelers, and compositors work from the same design. A fuller set often includes more views, such as the back. A three-point version keeps the three that carry the most information:
- Front: symmetrical, with the clearest read of silhouette, costume, and proportions.
- Three-quarter: the angle that exposes volume, overlapping forms, and how the face sits on the skull.
- Side (profile): shows depth, posture, and how far features and clothing project.
If you later need the back, you can add it as a fourth view. For many 2D animation and motion design jobs, three well-aligned views are enough to keep a character on model.
Step 1: Set up the canvas
Procreate supports high-resolution canvases, up to 16k by 8k on compatible iPad Pros. You don't need that much for a turnaround, but you do need room for three full-height figures side by side.
- Create a wide canvas, for example a 3:1 or 16:9 landscape format at a resolution you'd be comfortable using in After Effects later.
- Work in RGB. The PNG format doesn't support CMYK, so PNGs exported from Procreate are likely to be RGB anyway, and building in a CMYK profile only adds confusion if the art is headed for video.
- Remember that the number of layers you can use is limited by your iPad's memory. Size the document for the job.
Step 2: Build the guides
Guides do most of the work in a turnaround. Open the canvas drawing guide settings and choose the 2D Grid. Set the grid size so the lines fall at useful intervals, and consider the Symmetry guide if you want symmetry helping with the front view.
Then add your own landmarks on a dedicated layer named "Guides":
- A baseline for the feet
- A line for the top of the head
- Lines for the chin, shoulders, chest, waist, hips, knees, and ankles
- Vertical dividers to separate the three views
Draw these with a ruler-like stroke: hold at the end of a line and Procreate's QuickShape snaps it straight. Lock the Guides layer and lower its opacity. Every body part in every view should sit on or near the same horizontal lines, so this layer is the reason the sheet reads as one character instead of three drawings.
Step 3: Draw the front view first
Start with the front view because it is the easiest to keep symmetrical and the easiest to measure.
- Block in the figure with a loose sketch on its own layer, using a light color.
- Turn on the Symmetry guide, if useful, for the body and face. Turn it off for asymmetrical details like accessories, hair parting, or costume wear.
- Check proportions against your landmarks. Common anchors are head count (how many heads tall the character is), where the hands fall on the thigh, and the width of the shoulders compared to the head.
- Reduce the sketch opacity and ink on a new layer, using StreamLine to smooth the lines.
Group the sketch, ink, and any color layers into a folder called "Front". Groups let you move or transform the view without disturbing the others.
Step 4: Derive the three-quarter and side views
Resist drawing each angle from scratch. Build them from the front view's measurements.
Three-quarter view
- Duplicate the front view's landmarks into the middle third of the canvas.
- Keep the same heights for the head, shoulders, hips, and feet. Only the horizontal spacing changes.
- Compress the far side of the body, because forms turning away from you overlap and shorten.
- Place the facial features so the centerline curves around the head instead of running straight down.
Side view
- Align the profile to the same height lines.
- Mark where the front view's widths become depth: the chest, belly, and back become the thickness of the torso, and the nose, brow, and chin define the profile.
- Check that features visible in both the front and side views, such as a belt buckle, collar, or pocket, are the same size and at the same height.
You can use Procreate's Transform tool to copy a front-view layer and rough it into the new position, but treat that as a measurement aid. Nonuniform scaling and heavy Liquify moves can distort line weight, so redraw the final lines rather than relying on warped copies.
Step 5: Check consistency between views
This is the step that separates a usable turnaround from three loose drawings.
- Flip the canvas horizontally to spot proportion errors your eye has stopped seeing.
- Use Animation Assist. Put each view's ink in its own frame and turn on onion skinning. Flipping through the frames shows you where heads, shoulders, and feet drift off the shared lines. Procreate's animation tools are meant for simple frame-by-frame work, but they are a quick consistency test even if you never export an animation.
- Overlay the views. Temporarily set one group to a different color and overlay it on another to compare silhouettes and height.
- Check key details. Write down any element that must remain consistent (button count, necklace length, shoe sole thickness) and verify each one in all three views.
Step 6: Color and finish
Fill flats on a separate layer under the line art, then use clipping masks to add shading and texture without touching the base color. Layer masks and clipping masks keep edits non-destructive, which matters when a client asks to change a jacket color after the sheet is approved.
A few practical habits:
- Put each color region on a named layer or use a flat-color layer to make selection easy later.
- Add a small color palette strip to the sheet so downstream artists can sample exact values.
- Keep line art and color on separate layers so the lines can be isolated in compositing.
Step 7: Export for a motion pipeline
How you export depends on what happens next.
- Whole sheet: Export a flattened image for approval and reference.
- Individual views: Hide the other groups and export each view as a transparent PNG. This is useful for importing into After Effects as separate layers for rigging or puppet-style animation.
- Layered file: If you want to preserve layers for rigging in After Effects, check which layered formats your pipeline accepts and how your layers and blend modes come across.
- Color checks: Procreate PNGs can look different in other apps. A reported example is washed-out colors when Procreate PNGs are opened in Affinity Designer, which suggests it's worth opening a test export in your target app before delivering a full set. Do the same check in After Effects with your project's color management settings.
Name files clearly, for example character_front_v03.png, so versions don't get mixed up when the sheet goes to a rigger or a 3D artist.
Where Styleframe fits after the turnaround
A finished turnaround is a design document. Turning it into motion or 3D reference is a separate job, and that is where can sit alongside Procreate. Styleframe is an AI video and motion tool, so you can use your front, three-quarter, and side drawings as reference for the generation step while keeping your existing compositing workflow. As with any AI tool, check results against your sheet; a turnaround remains the reference that decides what's on model.
Common mistakes to avoid
- Different head sizes across views. Lock your landmark lines before drawing the second view.
- Perfect symmetry everywhere. Use it for the base, then break it where the character design requires.
- Flattening too early. Keep sketch, ink, and color separate until the sheet is approved.
- Skipping the test export. Open a PNG in your destination app before sending a full batch.
- Overusing Liquify. It's good for subtle corrections but can soften line quality.
FAQ
Can Procreate generate a turnaround automatically? No. The app provides guides, symmetry, layers, and animation tools, but the drawing and the proportion checking are manual.
How many views do I need? Three covers most needs. Add a back view if the costume or hair has important rear detail.
Is Procreate good enough for animation production? It handles storyboards, animatics, and simple frame-by-frame work well. For complex rigging, compositing, and VFX, many professionals bring the art into After Effects or similar tools.
What if I meant the driving three-point turn? Procreate can't perform it, but you can diagram it: use the 2D Grid for a road layout, draw the car at each of the three positions on separate layers, and add arrows on a top layer to show the path.