How to Digitize Artwork in Procreate
StyleFrame Team8 min read
To digitize artwork in Procreate, photograph or scan your drawing in even light, import it into a canvas at your target resolution, and correct the levels with Curves until the paper reads as white and the ink as near-black. Then set the layer to Multiply (or mask out the paper) so the linework sits on its own layer, clean up stray marks, and export a PNG or layered PSD. For animation work, size the canvas to your comp resolution up front so the file drops into After Effects without rescaling.
Start With a Good Capture
Everything downstream depends on the source image. Procreate can fix contrast and small blemishes, but it can't recover detail lost to blur, shadow, or perspective distortion.
Scanner or phone? A flatbed scanner gives you even lighting and a consistent scale, which matters for large batches or print work. A phone is fine for sketches and storyboards if you control the setup:
- Shoot in daylight near a window, or use two lights at 45° to avoid glare and shadow.
- Hold the camera parallel to the page, directly overhead. Tilting causes keystoning that you'll spend time correcting later.
- Lock focus and exposure by tapping and holding the screen.
- Put a clean white sheet behind translucent paper such as tracing paper.
- Take two or three shots and keep the sharpest.
If you want a flatter, auto-cropped result, the document scanner in the iOS Notes or Files apps will square up the page for you. Whichever route you take, get the file onto your iPad through AirDrop, iCloud, or the Files app.
Set Up the Canvas for Your Destination
Decide where this art is going before you create the canvas. Print illustrators often work at 300 DPI, but motion designers care about pixels, not DPI.
- In the Gallery, tap + and create a custom canvas.
- For video, match your comp: 3840 × 2160 for UHD, or larger if you plan to push in, pan across, or use the art as a texture in 3D.
- For print or archival, work at the physical size and 300 DPI.
- Choose a color profile. sRGB is the safe default; Display P3 gives wider gamut if your pipeline is color managed end to end.
Keep in mind that very large canvases can limit how many layers you can use, depending on your iPad. If you need many layers, test your device before committing to a huge canvas.
Import the Photo and Straighten It
Open Actions (wrench) → Add → Insert a photo and choose your capture. Procreate places it on its own layer.
- Use the Transform tool to scale and rotate. Enable Uniform so you don't distort proportions.
- If the page was shot at an angle, switch Transform to Distort or Warp and pull the corners until the page edges are square.
- Make all your transforms in a single pass where possible. Repeated resampling softens linework.
- Tap the Transform tool again to commit.
Check your edges by zooming to 100% and looking at the thinnest lines. If they're already mushy at this stage, re-shoot or re-scan rather than trying to sharpen later.
Clean Up Tone With Curves
Open Adjustments (magic wand) → Curves. This is the most important correction you'll make.
- Choose Gamma (the combined curve) to start.
- Drag the bottom-left point to the right until the darkest parts of your ink sit close to black.
- Drag the top-right point to the left until the paper background reaches white and the grain disappears.
- Add a gentle midtone point if the lines look too thin or too heavy.
Work in Layer mode to apply the adjustment to the whole layer, or use Pencil mode to paint the effect onto specific regions. Pencil mode is handy when one corner of the page is darker because of uneven lighting.
If the paper has a color cast, use Color Balance or lower the saturation first. Do that before Curves, so the white point you set is truly neutral.
For pencil sketches and soft media like charcoal or watercolor, resist the urge to crush everything to pure black and white. Aggressive curves flatten the gradients that make those media look natural. Push the white point enough to clean the paper, and leave the midtones alone.
Separate the Art From the Paper
For compositing, a layer with a real background baked in is a headache. You want the ink without the page. Procreate gives you two practical ways to get there.
Option 1: Multiply Blend Mode
Tap the N on the layer, then choose Multiply. Any white pixels become transparent against whatever sits underneath, and dark pixels stay. This works well for black ink on white paper, and lets you color on layers beneath the drawing. The downside is that the layer isn't truly transparent. If you export it as is, the white is still in the file. Multiply only affects how it composites inside Procreate.
Option 2: Turn Luminance Into Transparency
When you need a PNG with real alpha:
- Duplicate the cleaned artwork layer.
- On the original, add a Layer Mask.
- Select the duplicate, choose Select Layer → Copy (or tap the layer and choose Copy), then select the mask and paste the copy into it.
- The mask now reads brightness as opacity. Since the lines are dark, they'll be hidden, so Invert the mask.
- Hide or delete the duplicate. Fill the original layer with the color you want your linework to be, using Alpha Lock.
The result is clean linework on transparency that you can recolor at will. Merge the layer and mask down when you're happy, or keep them live for flexibility.
If your lines aren't pure black, you can tighten the mask with another Curves adjustment on the mask itself to control how much of the faint paper texture drops out.
Retouch and Repair
With the art isolated, fix the problems the capture couldn't:
- Stray marks and dust: paint them out on the mask with a hard, round, opaque brush set to black or white.
- Broken lines: draw on a new layer above using a monoline brush with no texture, so your repairs don't introduce a different character.
- Repeated elements: use the Selection tool in Freehand mode, then drag with three fingers or use the Transform tool to duplicate and reposition.
- Gaps in fills: use ColorDrop on a layer beneath the linework. If the fill leaks, raise the Threshold slightly or close the gap in the lines first.
Keep each element on its own layer wherever possible. If you're digitizing character parts, backgrounds, or props for animation, separating them now saves hours of rotoscoping later.
Export for Your Pipeline
Open Actions → Share and pick a format based on what happens next:
For After Effects, a PSD is usually the best choice. Import it so that each Procreate layer arrives as a separate layer, ready for parenting, puppet pins, or shape-layer tricks. Check your blend modes after import, especially Multiply layers, since results can differ slightly between apps. If you're passing the art to Nuke or Blender, export PNG sequences or individual layer PNGs with alpha and take them in as image planes.
Name your layers before exporting. "Layer 47" is a bad surprise in a comp with 60 of them.
Taking Digitized Art Into Motion
Once your drawings exist as clean raster layers, the next question is how to get them moving without redrawing every frame. Traditional options are puppet rigging in After Effects, frame-by-frame animation in dedicated animation software, or hand-built camera moves over a layered 2.5D scene.
Styleframe is an AI video and motion tool built for artists who want that process to stay controllable. It fits after the Procreate stage, not instead of it.
Common Problems and Quick Fixes
Lines look jagged after import. The canvas is probably too small relative to the capture. Re-create it at a larger size, or re-shoot with more resolution, rather than scaling up afterward.
Paper texture survives Curves. Use Pencil mode to paint the adjustment only where needed, or raise the white point on the mask rather than on the image layer.
Colors look different in After Effects. Check the color profile you chose in Procreate and the project color settings in After Effects. A mismatch between sRGB and Display P3 can cause washed-out or oversaturated art.
Edges have a white halo after recoloring. The antialiased edge pixels still carry paper color. Use Alpha Lock with a fill, or use the inverted mask approach, which stores edge softness as transparency instead.
The PSD is huge. Merge layers you won't edit, and delete hidden duplicates before exporting.
A Practical Workflow Summary
- Capture the drawing flat, evenly lit, and in focus.
- Create a Procreate canvas sized for your final comp or print target.
- Import, straighten, and commit the transform once.
- Fix white and black points with Curves.
- Isolate the ink with Multiply or a luminance mask.
- Retouch on separate layers.
- Export a layered PSD for After Effects, or PNGs with alpha for Nuke and Blender.
- Add motion through rigging, frame-by-frame work, or an AI motion tool like Styleframe.
Spending an extra ten minutes on capture and tone correction is the best investment in this process. A clean, correctly sized, well-organized file makes everything after it, from compositing to AI-assisted animation, faster and more predictable.