How to Digitize a Drawing in Procreate
StyleFrame Team8 min read
To digitize a drawing in Procreate, photograph or scan the page in even light, insert it on a high-resolution canvas, and use Curves to push the paper to white and the ink to near black. Then copy the layer into a layer mask and invert it, so the linework sits on transparency instead of a white background. Export the result as a layered PSD or a transparent PNG, and you can bring it into other compositing tools.
Before You Start: Capture the Drawing Well
Everything downstream depends on the source image. Procreate can fix contrast, but it cannot recover detail that was never captured.
- Light evenly. Use diffuse daylight or two lights at 45 degrees. Shadows across the page become gray patches you will have to remove later.
- Shoot straight on. Hold the camera parallel to the paper. If you shoot at an angle, you introduce keystone distortion that matters when the art needs to register with other elements.
- Put white paper under translucent sheets. If you drew on tracing paper or thin stock, a plain white sheet underneath keeps the background clean.
- Lock focus. Tap and hold on the screen to lock focus and exposure, and take a couple of frames so you have a sharp one to choose from.
- Shoot large. Use the camera's full resolution. You can always scale down, but you can't add detail back.
A flatbed scanner still gives the most consistent results for flat work. A phone or iPad camera is fine for sketchbooks and anything you can't scan.
Step 1: Set Up the Canvas
Get the photo onto your iPad with AirDrop or iCloud Photos, then create a new canvas in Procreate.
For motion work, think about where the art is going before you pick a size. If it will be animated in a 4K comp (3840 × 2160), you want a canvas at least that large, and larger if you plan to scale or push in on the drawing. A square canvas of 3000 × 3000 px is a common default for illustration, but it may be too small for a camera move across a detailed piece.
To bring the image in, open the Actions menu (wrench icon), tap Add, then Insert a photo. Use the Transform tool to rotate and scale the image to fit. Make all adjustments in one pass before committing, since repeated transforms resample the image and soften the line edges.
Step 2: Clean Up Contrast with Curves
Raw photos of pencil or ink drawings have gray paper, color casts, and uneven exposure. Fix those with the Adjustments menu (magic wand icon).
- Desaturate if needed. If the photo has a color cast, such as blue haze from indoor lighting, open Hue, Saturation, Brightness and drag Saturation to the left for a grayscale image. Skip this for colored artwork you want to keep.
- Open Curves. Pull the top-right point of the curve left until the paper reads as pure white, then pull the lower-left region down to darken the lines. Work in small moves and watch the thin lines. Over-pushing erodes fine detail and turns pencil shading into broken specks.
- Check at 100% zoom. Zoom in on the finest linework to verify that the edges remain smooth and not crunchy.
The goal is a clean black-on-white image, not a posterized one. For pencil work, stop earlier and keep some tonal range.
Step 3: Remove Stray Marks and Fix Gaps
Even a good capture has dust, smudges, paper grain, and pen skips. Clean them on separate layers where possible, so you can undo decisions later.
- Erase specks around the art. Use the Selection tool in Freehand mode to select the drawing, tap Invert, and fill the surrounding area with white on a new layer. Merge it down when you're satisfied.
- Patch gaps. For missing sections of line, use a hard, textureless monoline brush with pure black. For stray marks inside the art, paint over them with white.
- Snap to true black and white. In the Color panel, double-tap the outer rim at the black or white extreme to snap to a pure value. Use the tap-and-hold trick to quickly toggle between your last two colors.
- Reuse repeated elements. If the drawing includes repeating shapes like leaves, scales, or rivets, you can select, duplicate, and reposition them rather than redrawing them.
Try not to over-clean. The slight irregularity of hand-drawn line is usually the reason someone draws on paper in the first place, and it holds up well against the clean geometry of motion graphics.
Step 4: Separate the Linework from the Paper
This is the step that turns a photo of a drawing into usable digital art. Right now, your lines live on an opaque white image. You want them on transparency so you can place color, textures, or footage underneath.
Option A: Multiply blend mode (fast)
Set the drawing layer's blend mode to Multiply. White becomes effectively transparent against whatever sits below, and the dark lines remain. Place a new layer beneath it for color. This is quick and non-destructive, and it works best when the background is already pure white. The downside is that the layer is still technically opaque, so it can behave unexpectedly in other apps.
Option B: Layer mask (real transparency)
For a layer that is actually transparent when exported:
- Select the cleaned drawing layer and swipe down with three fingers, then tap Copy.
- Create a new layer above it and fill it with black, or whatever line color you want.
- Tap the new layer and choose Mask to add a layer mask.
- Select the mask, swipe down with three fingers, and tap Paste.
- With the mask still selected, tap it again and choose Invert.
The black linework now sits on transparency and can be recolored independently. You can hide or delete the original photo layer. Because the line color is a plain fill, changing it takes one tap, and you can paint beneath the lines on new layers without touching them.
If you have an alpha-locked fill layer and a mask, you can also adjust the mask's levels with Curves to thicken or thin the line subtly.
Step 5: Add Color and Structure for Animation
If the drawing is going into a motion pipeline, set up layers with the animation in mind before you export.
- Separate by movement. Split elements that will move independently, such as a character's arm, eyes, or background props, into their own layers. Painting behind the line layer lets you fill hidden areas where parts will overlap or rotate.
- Name your layers. Descriptive names save a lot of time later in your compositing tool.
- Paint beyond the edges. If something will be rotated, scaled, or revealed, extend the color past the line so that no gaps appear.
- Use Animation Assist for quick tests. Procreate's Animation Assist mode lets you test frame-by-frame sequences. For serious animation, most artists go to a dedicated tool, but it's useful for checking a loop.
Step 6: Export for After Effects and Other Tools
Choose the format based on what you need next.
- PSD: A layered format. Check that blend modes and masks translated, because not every Procreate behavior maps exactly.
- PNG: Preserves transparency for a single flattened piece of art, ideal for a clean linework asset.
Procreate is a raster app. If you need scalable vector outlines, bring the high-contrast PNG into Illustrator, Affinity Designer, or similar and run an image trace. That works best on clean black-and-white linework, which is another reason to do the Curves step carefully.
In After Effects, import the PSD as a composition (retain layer sizes), then check the color profile. Procreate's color profile may differ from your project's, so set your project's color management deliberately to avoid unexpected shifts. If your comp is sRGB, convert or assign profiles consistently.
Common Problems and Fixes
- Gray or yellow paper after Curves. Capture with more even light, or apply Curves in two passes.
- Lines look jagged. The source resolution was too low or the image was transformed more than once. Re-shoot at higher resolution and transform once.
- Fine pencil detail disappears. You pushed contrast too far. Back off and use Multiply instead of a hard mask.
- Halos around lines after masking. Slightly darken the mask with Curves before inverting, or lightly choke the edge with a small Gaussian blur followed by Curves.
- Colors shift in After Effects. Check the color profile on the Procreate canvas and in your project settings.
Quick Checklist
- Photograph or scan evenly, straight on, at full resolution.
- Create a canvas sized for your final use.
- Insert the photo and transform once.
- Use Curves for contrast and Hue, Saturation, Brightness for color casts.
- Clean specks, patch gaps, and snap to pure values.
- Use Multiply or a layer mask to separate the lines from the paper.
- Organize layers by movement and name them.
- Export PSD or PNG, and check color management in After Effects.
Done carefully, digitizing in Procreate gives you a clean, layered asset that holds up in a professional motion pipeline, with your original line quality intact.