How to Digitally Paint Rain Procreate
StyleFrame Team8 min read
To digitally paint rain in Procreate, build a streak texture (noise, then a directional motion blur, then faded edges), turn it into a custom brush in Brush Studio, and paint the rain in several depth layers set to a light-friendly blend mode. Add splashes, wet reflections, and a consistent angle so the rain feels like part of the scene. If you need the rain to move, you can loop a few frames in Animation Assist and bring the result into After Effects as an overlay.
What Makes Painted Rain Read as Rain
Rain is rarely drawn as individual lines. Viewers read it through a handful of cues:
- Directional streaks that share a consistent angle
- Depth variation, with sharp, large drops near the camera and soft, faint ones far away
- Interaction with light, because rain is mostly invisible until a light source catches it
- Secondary evidence like splashes, ripples, wet surfaces, and a muted atmosphere
If you paint only streaks over a dry, high-contrast scene, the image looks like a texture overlay. Plan for all four cues before you start.
Step 1: Build a Rain Texture From Noise
The fastest route to a convincing brush needs almost no drawing.
- Create a square canvas, such as 2048 × 2048 px. A square source avoids distortion when it becomes a brush shape, and the high resolution keeps the brush from looking pixelated at large sizes.
- Fill a layer with solid black.
- Open Adjustments, choose the noise option, and apply it to the layer. Drag to adjust the character. Scale, octaves, and turbulence control how dense and clumpy the white specks are.
- Duplicate the layer, rotate or scale the copy, and combine the two so isolated large blobs break up. Fewer, smaller specks give you light drizzle. More specks give you a downpour.
- Apply Motion Blur to the layer and set the direction to the angle you want your rain to fall. The specks stretch into streaks.
- Fade the edges to black with a soft gradient or a large soft brush. A brush stamp with hard edges leaves visible rectangles when you drag it across the canvas.
Export the result to your photo library as a flat image. This is your brush shape.
Step 2: Turn the Texture Into a Brush
Open the Brush Library and tap the plus icon to create a new brush. Then:
- Shape: Import the streak image from your photos as the shape source.
- Stroke Path: Increase spacing until stamps no longer pile into a solid smear. Add a little jitter so repeated stamps do not line up.
- Shape behavior: Enable some rotation or scatter randomization, but keep the range narrow. Rain that varies wildly in angle looks like debris.
- Apple Pencil dynamics: Map pressure to opacity so you can build density gradually.
- Properties: Set a sensible maximum and minimum size, because you will use this brush at several scales.
Test it on the drawing pad in the brush editor until a single dab looks like a patch of rain rather than a rectangle. If you would rather skip building your own, free rain brush packs exist in the Procreate community. Even then, it is worth understanding how the brush is made so you can adjust angle and density to match your scene.
Step 3: Paint Rain in Depth Layers
Do not put all your rain on a single layer. Use at least three, each on its own layer so you can adjust them separately.
Far rain
Use a small brush size at low opacity. Apply a slight Gaussian Blur. This layer adds atmosphere and haze more than visible streaks, and it should sit mostly behind your midground objects.
Midground rain
This is your main layer. Use medium streaks at moderate opacity, and erase it where it should be blocked by roofs, awnings, or tree canopies. Rain falling under cover is a common error that quickly breaks believability.
Foreground rain
Use large, soft, bright streaks with a stronger blur, and keep them sparse. These give the viewer a sense of looking through the rain rather than at it. Too many will obscure your subject.
Blend modes and color
Set rain layers to Screen or Add so they brighten what is beneath. On a bright background, use a lower opacity and a slightly darker tint, since white rain disappears against a pale sky. Avoid pure white. Pick up a cool gray-blue from the scene, and warm it near practical lights like street lamps or windows.
Step 4: Light the Rain
Rain without lighting looks pasted on. Add a new layer above your rain and consider:
- Backlighting: Rain is most visible when lit from behind or from the side. Paint brighter, denser streaks near light sources and thin them toward shadow.
- Halos and glows: Add soft glows around lamps, headlights, and signs. Tiny droplets scatter light, so a wet night scene should have more bloom than a dry one.
- Atmospheric depth: Wash a low-opacity fog or haze layer between planes to push distant buildings back and lower their contrast.
Step 5: Add Splashes, Ripples, and Wet Surfaces
Secondary details do the most work in selling the weather.
Splashes: On hard ground, paint tiny crown-shaped bursts with a small hard brush, a few pixels tall and slightly angled. Keep them irregular and place more of them near the foreground.
Ripples: On puddles, draw thin, flattened ellipses that follow the perspective of the ground plane. Overlap a few for a busy surface.
Reflections: Duplicate the objects above a wet surface, flip them vertically, move them below the contact point, and lower the opacity. Then distort the copy slightly with Liquify or a ripple-style displacement so the reflection breaks up. Streaky vertical smears work well on asphalt.
Specular highlights: Wet surfaces gain sharper, brighter highlights and deeper darks. Increase contrast on roads, rooftops, and leaves, and add thin rim lights along edges.
Clothing and props: Darken fabric slightly, add small glints on shoulders, and let hair clump. These small cues connect characters to the weather.
Step 6: Animate the Rain Loop in Procreate
Procreate's Animation Assist can take a painted rain layer and give you a basic moving loop.
- Turn on Animation Assist and create a group of rain frames. Use four to eight frames, each with the streaks in different positions at the same angle.
- Keep your background on its own layer and set it to Background in the animation settings, so it holds still while the rain frames cycle.
- Use onion skinning to keep the rhythm even. Avoid obvious repeating clumps, which become noticeable when looped.
- Export in the format that suits your pipeline. For compositing, a format that preserves transparency, if your version offers it, is the most useful. Otherwise, export a still of the background separately and render the rain on black for a Screen or Add blend.
A short loop works for ambient mood. For longer shots, you will usually want to layer two or three loops of different speeds and sizes rather than stretching a single one.
Step 7: Take It Into After Effects
Procreate is a good place to design rain, but a motion pipeline gives you more control over timing and integration.
- Import your rain loop and set it to Screen or Add. Loop it with Time > Enable Time Remapping or by pre-comping and repeating.
- Stack copies at different scales, speeds, and blur amounts to build parallax between foreground and background.
- Add a slight Directional Blur or Gaussian Blur adjustment layer to match depth of field.
- Tie splashes and ripples to the ground plane in a 3D layer, or use a camera-projected setup if the shot moves.
- Color-match with Curves or Lumetri so the rain shares the scene's black levels and tint.
If you work in Nuke, the same principles apply: keep rain as separate passes so you can grade, defocus, and merge each one independently.
Common Mistakes to Avoid
- Uniform streaks: Identical size and opacity everywhere flatten the image. Vary both.
- Pure white rain: It either blows out or vanishes. Tint it to the environment.
- Mismatched angles: Rain, splashes, and wind-blown elements such as hair, flags, and foliage should agree on direction.
- Rain under cover: Mask streaks beneath overhangs.
- No ground response: Rain without splashes or wetness feels like an overlay.
- Overdone density: Leave room for your subject. Rain should support the focal point, not cover it.
Quick Checklist
- Make a square noise texture, stretch it with Motion Blur, and fade the edges.
- Build a brush in Brush Studio with spacing, jitter, and limited rotation.
- Paint far, mid, and foreground rain on separate layers.
- Set the layers to Screen or Add and tint them to the scene.
- Light the rain with glows, backlight, and haze.
- Add splashes, ripples, reflections, and wet highlights.
- Loop a short frame set if you need motion, then finish timing and depth in After Effects.
Once you have the brush and layer structure, you can reuse them across projects and change only the angle, density, and color to fit each new scene.