How to Design Tattoos on Procreate
StyleFrame Team7 min read
To design a tattoo on Procreate, start an A4 canvas, place a photo of the body part on its own layer, and sketch the design over that placement so it follows the body's flow. Then work through separate layers for sketch, line work, black fill, shading, and color. Finish by converting the artwork into a clean stencil and exporting it for print or reuse. The same layered file also works as source art for motion work, since each layer can be pulled into After Effects or another compositing tool.
Set Up the Canvas for Real-World Scale
Tattoo designs end up on skin at a physical size, so choose a canvas that matches that size from the start. Many tattoo artists work on A4. Forearms, upper arms, chests, and thighs all land close to that scale, so a design placed on an A4 sheet gives you an instant sense of how large it will print.
- Open Procreate and tap the plus icon in the gallery's top right corner.
- Choose A4 from the presets, or enter custom dimensions for a back piece or sleeve.
- Check your canvas size. The bigger the canvas, the fewer layers Procreate allows. If you hit that ceiling, shrink the canvas or merge finished layers.
If you plan to animate or composite the design later, make the canvas larger than you think you need. Vector-like clean lines scale up more gracefully when the source starts big.
Place the Body Part First
The biggest difference between a decent tattoo design and a good one is how it sits on the body. A design drawn on a flat white page often looks stiff once wrapped around a calf or shoulder.
- Insert a photo of the target body part (wrench menu, then Insert a photo) and keep it on its own layer.
- Draw a few flow lines along the muscle and bone structure. These are guides for where the composition should curve and taper.
- Lower the opacity of the body layer once your guides are in, so it stays visible without competing with your artwork.
Working this way means the composition is built around the placement, rather than adjusted afterward.
Bring In Reference Without Cluttering the Canvas
You have two practical options for reference imagery:
- Built-in reference window. Go to the wrench menu, open Canvas, and switch on Reference. You can load an image, or mirror the canvas itself, and move the floating window around. This suits realism work, where you need to zoom into details without affecting your artwork.
- Reference on the canvas. For styles like neo-traditional, drop the image directly onto its own layer, reduce its opacity, and draw over it. This locks in proportions quickly.
Either way, keep references on separate layers you can hide later. Don't trace blindly. Use them to settle proportion and structure, then simplify and exaggerate where the style demands it. If you borrow imagery from other sources, make sure you have the right to adapt it, especially for work clients will wear permanently.
Build the Design in Layers
Layer discipline is what makes a Procreate tattoo file reusable. A reliable stack, from bottom to top:
- Body placement photo
- Reference image
- Rough sketch (use a bright color so it's distinguishable)
- Refined sketch
- Final line work
- Solid black fills
- Shading and texture
- Color (if applicable)
Each stage gets its own layer, so a mistake only affects the layer you're on. Lower the sketch opacity as you move to line work so you ink over a faint guide rather than a busy one. Tap the "N" on a layer to change its opacity or blend mode.
Use Symmetry for Ornamental Work
For mandalas, wings, filigree, or anything mirrored, open the wrench menu, choose Canvas, turn on Drawing Guide, and edit it to Symmetry. Increase the guide thickness so you can see it, then switch on Drawing Assist for the layer you're working on. Whatever you draw on one side appears mirrored on the other. Keep symmetrical elements on separate layers from freehand ones, so you can adjust them independently.
Pick Brushes by Job, Not by Count
You don't need hundreds of brushes. Most designs need:
- A consistent, slightly textured line brush for outlines.
- A solid fill brush or the selection and fill tools for blacks.
- One or two shading brushes for gradients, stipple, or whip-shading effects.
Premade tattoo brush bundles with needle-style and shading sets exist, and some artists like them for realism, but a handful of well-chosen brushes will serve you better than a huge unfamiliar library. Adjust size and opacity with the sliders at the screen edge. You can move them to the other side via Preferences (right-hand interface) if you're left-handed.
Fix Size Problems Without Redrawing
If you run out of room mid-design, go to the wrench menu, choose Canvas, and use Crop and Resize to extend the canvas or scale the artwork. Do this before final line work. Scaling inked linework repeatedly softens edges and changes line weight relationships.
Create a Clean Stencil
A stencil is the high-contrast line version of your design that gets transferred to skin. Procreate can generate one without extra apps, using adjustments and blend modes. Three common approaches depend on the type of artwork:
Color or heavily shaded designs (traditional, neo-traditional, Japanese):
- Desaturate the layer with Hue, Saturation, Brightness.
- Duplicate it and invert the duplicate.
- Set the duplicate's blend mode to Color Dodge.
- Apply a small Gaussian Blur to the top layer. The fills drop away and the line detail remains.
- Tweak with Curves to crisp up the lines.
Solid fill designs:
- Put a white layer beneath the artwork and merge them so the image has a solid background.
- Open Curves and pull the shadows and highlights so only the outer edge reads as a line.
- Duplicate with Multiply to thicken or darken the outline.
Realistic or photographic designs:
- Merge the artwork on a white background first, so there's no soft fade at the edges.
- Duplicate it and set the duplicate to Divide.
- Add a light Gaussian Blur, enough to reveal the structure without erasing fine detail.
- Merge, then use Curves to push the line detail into place.
Always test-print at actual size before the stencil goes on a client. Thin lines that look fine on an iPad can disappear on thermal paper.
Export and Organize Your Files
- Export a flattened PNG or PDF for client approval and printing.
- Export a layered PSD, or individual transparent PNGs, for anything that will be edited again.
- Use Procreate's Stacks in the gallery to group files by project, for example "Client Work" and "Finished Designs".
Name your layers properly before export. A PSD with layers called "Layer 47" is miserable to open in After Effects.
A small comfort note: a matte screen protector gives the iPad glass a texture closer to paper, which helps with control on fine line work.
Taking a Tattoo Design Into Motion
Tattoo artwork shows up more and more in motion projects: title sequences, music videos, brand spots, and social content where an illustrated tattoo appears on skin, draws itself on, or transforms. If you're a motion designer or compositor, the Procreate file is the start of the job, not the end.
A practical handoff from Procreate to After Effects:
- Export the layered PSD, keeping line work, fills, and shading on separate layers.
- Import as a composition, retaining layer sizes.
- Place it on the skin plate using a tracked surface or mesh warp, with a Multiply or Linear Burn blend so it picks up skin texture.
- Animate reveals with trim paths on re-traced line work, or with masks and track mattes on the raster layers.
Common Mistakes to Avoid
- Designing on a blank page. Without a placement reference, compositions rarely follow the body.
- Flattening too early. Merge layers only after the client signs off.
- Skipping the print test. Stencil line weight needs checking at real size.
- Overusing brushes. Consistent line quality reads as skill; brush variety rarely does.
- Ignoring licensing. Check usage rights on reference images and brush packs, especially if the artwork will appear in commercial video.
Quick Workflow Recap
- Create an A4 canvas.
- Add a body-part photo and flow lines.
- Add reference imagery on its own layer or in the reference window.
- Sketch, refine, ink, fill, shade, and color on separate layers.
- Use the symmetry guide for mirrored elements.
- Build a stencil using desaturate, invert, Color Dodge, and Curves, or the white-background methods above.
- Test print at real size.
- Export flattened files for approval and layered files for any motion or compositing work.
Once the layered file is clean, the same artwork serves the artist, the client, and the compositor without rework.