How to Design Enamel Pins Procreate
StyleFrame Team8 min read
To design an enamel pin in Procreate, work on a canvas sized to the finished pin (usually 1–1.5 inches) at 300 DPI. Draw bold, closed linework that becomes the raised metal lines, then fill each enclosed area with one flat color. Every color must be separated by metal, and the outer edge must be metal too. Export a PNG, JPEG, or PSD with your Pantone choices noted, and let the manufacturer convert it to a vector or production proof.
Understand What the Factory Is Building
Enamel pin art is a drawing of a metal mold, not a normal illustration. Metal lines form walls, and liquid enamel fills the recessed pockets between them. This is why gradients, soft shading, and colors that touch without a border don't survive.
Two enamel types shape how you draw:
- Hard enamel is filled nearly flush with the metal lines, so the surface feels smooth. It's a polished, durable look.
- Soft enamel is filled lower than the metal lines, giving a textured surface. It generally costs less than hard enamel.
Manufacturers publish minimums, and one supplier's file-prep guide lists these:
- Minimum metal line: 0.1 mm for soft enamel, 0.15 mm for hard enamel
- Minimum enamel color area: 0.3 mm
- Cutouts that go all the way through: 2.5 mm minimum, with 3 mm suggested for the cleanest cut
Check your own manufacturer's numbers before you commit, because limits vary by factory. Design to the stricter spec if you haven't picked a supplier yet.
Set Up the Procreate Canvas
Start with the physical size. Most beginner pins land around 1–1.5 inches, and size affects both cost and wearability. Tiny pins punish detail.
In Procreate, create a custom canvas in inches. You have two reasonable options:
- Actual size at 300 DPI. A 1.5 × 1.5 inch canvas is 450 × 450 px. It's honest about what the pin will look like, but it limits how smoothly you can draw.
- A scaled-up canvas. Work at 3× or 4× the pin size at 300 DPI for more control, and keep the scale factor in mind when checking line widths.
If you scale up, use this conversion for minimum widths:
pixels = mm × (DPI ÷ 25.4) × scale factor
At 300 DPI, 1 mm is about 11.8 px. At actual size, a 0.15 mm metal line is about 1.8 px and a 0.3 mm color area is about 3.5 px. On a 4× canvas, multiply those by four. In practice, draw lines well above the minimums. Barely legal lines make for fragile pins.
Turn on a Drawing Guide if you want a grid for symmetry. Keep a separate group for sketch, linework, flat colors, and reference notes.
Sketch With Manufacturing in Mind
Choose one clear subject: a character, symbol, object, or short phrase. Pins are worn on jackets, bags, and lanyards, so the design has to read at a glance.
While sketching:
- Simplify shapes. Replace hatching and texture with solid areas.
- Reduce the palette. Fewer colors are easier to proof and usually look cleaner.
- Avoid thin slivers of color. If a shape would be narrower than your minimum, merge it or drop it.
- Make the silhouette work. The outer edge of the pin is a metal border, so decide on the shape of the cut early.
- Keep text chunky. Small serif type can fill in or disappear.
Lower the sketch layer's opacity and ink on a new layer above it. Turn on StreamLine in your brush settings for steadier curves.
Ink the Metal Lines
This is the step that most affects whether the design manufactures cleanly. In hard enamel work, the lines you ink are the raised metal walls.
- Use a simple brush with consistent pressure response. Avoid textured or tapered brushes, since the lines should be uniform and crisp.
- Close every shape. A gap of even a pixel can cause a fill leak later and, more importantly, would mean enamel colors touch in production.
- Keep line weight consistent across the design. Make the outer border slightly heavier than interior lines if you want a stronger edge.
- Zoom in and tidy the corners. Smooth curves translate better to a mold than wobbly ones.
- Keep linework on its own layer in solid black, or in the metal color you intend.
Use the Selection and Eraser tools to clean joins. If you want perfect geometry for circles and straight edges, QuickShape helps.
Fill Flat Colors on Separate Layers
Create a layer below the linework. Set the linework layer as a Reference layer, then fill the color layer with ColorDrop. Reference lets the fill respect the linework even though the fills live on a different layer, which keeps your art editable.
Then:
- Fill each region with a single flat color.
- Use Alpha Lock to recolor a layer without disturbing its shapes.
- Check that fills tuck slightly under the lines so no gaps appear at the edges.
- Zoom out to thumbnail size and make sure the colors still separate clearly.
Pick Pantone-Friendly Colors
Some factories mix enamel from the Pantone Matching System, such as Pantone+ Solid Coated and sometimes Pastels. Metallic and true neon shades are generally not available. You can sometimes approximate a neon hue, but not its saturation.
Procreate has no built-in Pantone library, so choose approximate colors on screen, then confirm the actual Pantone numbers with your supplier. Screens and enamel never match exactly. Tell the factory if "closest match" is acceptable and ask for a proof.
Mock the Metal
Plating (gold, silver, nickel, copper, and so on) is also part of the design. Use stand-in colors on your artwork so the factory can see your intent. One supplier suggests these Pantone references:
- Gold: Pantone 101 C
- Brass: Pantone 100 C
- Silver nickel: Cool Grey 1
- Black nickel: Cool Grey 11
- Copper: 7591 C
- Rose gold: 7411 C
Label your metal choice in a note or on a separate reference layer instead of burying it in the linework.
Design the Outline, Cutouts, and Backing
Because enamel starts as liquid, the outer edge must be metal. Add a clear border around the whole design. If your artwork has negative-space holes, check they meet the through-cut minimum noted earlier. Cut-through areas that are too small can end up as recessed metal instead of an open hole.
Also plan for what you can't draw in Procreate: post style, backing, finish, and any extras like glitter or epoxy. Mention these in your order notes, since they affect the proof.
Export and Prepare Files
Factories vary in what they accept. Many prefer vector formats such as AI, EPS, or PDF, but plenty will work from a high-resolution raster.
From Procreate, you can export PNG, JPEG, or PSD. Good practice:
- Export a flattened PNG for quick review and a layered PSD for revisions.
- Export the linework on its own as a transparent PNG at the largest size you can.
- Include a color callout: a swatch image listing each color's target Pantone number.
- State the final dimensions, quantity, enamel type, and plating.
If you want a vector, bring the linework into Illustrator and use Image Trace, or redraw it with the Pen tool. Convert text to outlines before sending if fonts are involved. When you set strokes in Illustrator, check them against the real-world scale. A hairline stroke on a design that will be shrunk to 1.25 inches won't tell you how it'll actually look.
Review the factory's production proof carefully: check line thickness, colors, size, plating, and backing before approving.
Extend the Pin Into Motion and Promo Assets
If you work in motion or video, you probably want more than a flat design. A launch teaser, a product reveal, or a social loop all benefit from seeing the pin as a physical object catching light. Keep one distinction clear: a mockup is a promotional visual, not a manufacturing proof. Lock the design with your factory first.
This is where Styleframe fits, as an AI video and motion tool. Treat any AI output as plates for your pipeline, and check anything that must match the real pin, such as colors and proportions, against your approved factory proof.
Final Pre-Submission Checklist
- Canvas matches the pin size and 300 DPI (or a known scale factor).
- All metal lines meet your factory's minimum thickness.
- Every shape is closed, and no two colors touch without metal between them.
- Color areas are above the minimum width.
- The outer edge is solid metal.
- Cutouts meet the through-hole minimum.
- Colors are mapped to Pantone numbers, with no neon or metallic assumptions.
- Plating, enamel type, size, and quantity are specified.
- Text is bold and legible, and outlined if sent as vector.
- Layered source and flattened exports are saved.
FAQ
Can I design an enamel pin entirely in Procreate? Yes. Many factories accept high-resolution raster files and will convert them to production-ready vectors, though some prefer vectors from the start.
Do I need to draw in vector? Not necessarily. Clean, high-resolution linework is often enough, but ask your manufacturer first.
Why can't I use gradients? Each enamel color is filled separately and held in place by metal walls. Gradients need to be simplified into distinct flat color areas.
What size should I start with? Around 1–1.5 inches is a sensible range for a first pin, since it balances detail, cost, and wearability.