How to Delete a Line in Procreate
StyleFrame Team8 min read
In Procreate, the fastest way to delete a line is to undo it with a two-finger tap, which removes the last stroke. For older lines, use the Eraser tool, or make a Selection around the line and choose Cut (three-finger swipe down) or Clear from the layer menu. Procreate is raster-based, so you can't click a single stroke and delete it; you remove pixels, or you delete the layer the line lives on.
Quick reference: which method to use
Undo the last line
Tap the canvas with two fingers to undo the last action. Hold the two-finger tap to step back rapidly through your history. A three-finger tap redoes, and the undo and redo arrows in the sidebar do the same thing.
Undo works on actions, not on lines, so it removes whatever you did last. If you drew a stroke, then changed a layer's opacity, the opacity change goes first. Procreate keeps a limited history that depends on canvas size and device memory. Once an old line falls outside that history, you'll need to erase it manually.
Erase a line with the Eraser tool
The Eraser is the icon directly below the Smudge tool in the top-right toolbar. Tap it, then pick a brush from the library. The eraser can use any brush, so a textured eraser leaves the same rough edge as a textured line.
A few habits make this cleaner:
- Set size and opacity first. Use the two sliders on the left. A low-opacity eraser thins a line instead of removing it, which is useful for softening edges.
- Check your active layer. The eraser only affects the layer you've selected. If nothing happens, you're probably on the wrong layer.
- Zoom in. Pinch to zoom for fine cleanup, so you can use a small brush with confidence.
- Consider a pencil shortcut. If you use an Apple Pencil that supports double-tap, check Procreate's gesture and Apple Pencil settings, since you can map the double-tap to switch between the current brush and eraser.
Delete a line precisely with Selection
When you want a hard, clean cut instead of a hand-drawn erase, use Selection.
- Tap the S icon (Selection).
- Choose a mode at the bottom: Freehand, Rectangle, Ellipse, or Automatic.
- Select the area that contains the line you want gone. With Freehand, tap each corner of the region to build a polygon, then close it.
- Make sure the correct layer is active.
- Swipe down with three fingers to open the Cut, Copy, and Paste menu, then tap Cut.
Everything inside the selection on that layer is removed. This is the best way to trim a long line cleanly at a precise point, such as cutting construction lines flush against an edge.
You can also tap the layer's thumbnail and choose Clear. With a selection active, Clear removes only the selected area. With no selection, it wipes the whole layer. If you're ever surprised by a layer going blank, this is usually why.
Erase in a perfectly straight line
Shaky erase strokes are a common complaint. Procreate gives you two good fixes.
QuickShape with the eraser. Select the Eraser, draw a line, and hold your pen at the end of the stroke without lifting. Procreate snaps the stroke into a straight line. While you're still holding, you can lengthen, shorten, or rotate the line around its starting point, then lift to commit the erase.
Selection plus Cut. For a rectangular erase, make a Rectangle or Freehand selection along the edge you want to remove, then Cut or Clear. This is the better choice when you need an exact edge, because the selection can be adjusted before you commit.
Drawing Guides can also constrain strokes. If a guide is on, your eraser follows it, which helps for symmetrical cleanup.
Delete a line that lives on its own layer
If you keep a line on a dedicated layer, deleting it is trivial: swipe left on the layer in the Layers panel and tap Delete. To keep the layer but empty it, tap the layer and choose Clear.
This is also the most forgiving workflow. If you separate sketch, line art, color, and effects from the start, you rarely need to erase around other work, and mistakes stay isolated. Hide a layer with its checkbox to test whether a line needs to go before you commit to removing it.
Remove a line from a flat color area
If the line is a clean, solid-color shape, such as a stroke on a flat background, Automatic selection can isolate it faster than erasing by hand:
- Open Selection and choose Automatic.
- Tap the line. Drag your finger or pen across the canvas to adjust the threshold until only the line is selected.
- Tap the layer and choose Clear.
This works best on crisp, uniform lines. Anti-aliased or textured edges may leave a faint fringe, and you can clean that up with a small eraser pass or by feathering the selection first.
When lines disappear on their own
If strokes vanish while you draw, the cause is usually a settings or hardware issue, not a Procreate bug.
- iPad Zoom accessibility. If Zoom is turned on in Settings > Accessibility, touching the screen with your hand can delete the last Pencil stroke. Turn Zoom off.
- Pencil connection. Re-pair your Apple Pencil by forgetting it in Bluetooth settings and connecting again.
- Pencil tip. A loose or worn tip can cause dropped contact. Tighten or replace it.
- Gesture conflicts. A stray two-finger tap triggers undo. If a palm or second finger is brushing the canvas, check your gesture and touch settings.
- Software versions. Confirm both Procreate and iPadOS are up to date. Tap "Procreate" in the Gallery to see your build number.
If the problem is sporadic, a full app close and a device restart are worth trying before anything else.
Keep cleanup non-destructive if the art is heading to motion
If your Procreate work feeds a motion pipeline, such as storyboards, style frames, hand-drawn elements, or texture passes for After Effects, how you delete lines matters for later.
- Duplicate before you cut. Duplicate the layer, hide the original, and erase on the copy. Raster erasing can't be recovered once undo history runs out.
- Separate elements by layer. Export as a layered PSD so you can pull elements apart in After Effects or Photoshop without more cleanup.
- Export transparent PNGs for single elements, and hide the background layer first so you don't ship a stray white fill.
- Clean edges before animating. Leftover stray pixels from a rushed erase show up as flicker when a layer moves, scales, or gets keyed.
- Use Animation Assist for frame-by-frame work. Delete lines on each frame's layer, and use onion skinning to check cleanup against neighboring frames.
Where Styleframe fits after the cleanup
Once your linework is clean, you can use it as controlled input for AI-assisted motion rather than leaving it as a static asset. Styleframe is an AI video and motion tool built for artists who want direction over the result, not a one-click black box. Every generation is driven by your references: images, video clips, and keyframes.
In practice, a few of its tools pair well with Procreate output:
- Frames-to-Video is keyframe-driven. Use cleaned Procreate frames as start and end keyframes and generate the motion between them.
- Restyle and Ink-and-Paint apply reference-driven style transfer. Feed in your drawn look as the reference so footage or renders pick up your line quality instead of a generic style.
- 2D-to-3D and Turntable can help you explore a character or prop from a flat drawing.
- Remove Background isolates a subject, and 4K Upscale brings output to production-ready 4K.
Iteration is non-destructive, so you can try a new keyframe or reference without losing earlier results. Styleframe also exports image sequences, so the output drops into the same compositing setup you already use, including After Effects and Nuke. An After Effects plugin is on the way. You keep your compositing workflow and add a more controllable generation step before it.
None of this replaces careful cleanup in Procreate. A reference with stray marks or broken lines gives any style-transfer or keyframe tool a worse starting point, so finishing the erase work first pays off.
FAQ
Can I delete just one line in Procreate? Not directly, because Procreate doesn't store strokes as individual objects. Undo it if it's recent, erase it by hand, select and cut it, or draw each line on its own layer so you can delete the layer.
How do I delete everything on a layer? Tap the layer and choose Clear, or swipe left and choose Delete to remove the layer itself. Deselect any active selection first, or Clear will only affect the selected area.
Why won't the eraser work? Check that the right layer is active and unlocked, that Alpha Lock is off, and that eraser opacity isn't set very low. A reference layer can also block edits.
How do I get a straight erase line? Draw with the eraser and hold at the end of the stroke to trigger QuickShape, or use a Rectangle or Freehand selection and Cut.
Is there a faster way to erase than switching tools? If your Apple Pencil supports double-tap, you may be able to map it to switch to the eraser in Procreate's settings.