How to Cut Things Out in Procreate
StyleFrame Team8 min read
To cut something out in Procreate, select it with the Selection tool (Automatic, Freehand, Rectangle, or Ellipse), then swipe down with three fingers and tap Cut or Cut & Paste. Cut removes the pixels, and Cut & Paste moves them to their own layer. For a non-destructive cutout, use a mask instead, so the original pixels stay intact. Export the result as a PNG with the background hidden to keep the transparency.
Cut a Subject Out with the Selection Tool
The Selection tool (the S-shaped icon) is the foundation of every cutout in Procreate. Select the layer holding your image first, because selections act on the active layer. Then choose a mode:
- Automatic selects regions by color similarity. Tap or drag on the area you want. This works best on flat color, such as an illustration on a plain background. If the tool isn't picking up the edge, it often helps to temporarily change the surrounding colors.
- Freehand lets you draw the outline yourself. Closing the shape by tapping the starting dot completes it. If the marching ants seem to vanish when you tap that dot, nothing is wrong: the outline has become an active selection. It's how the tool is meant to work.
- Rectangle and Ellipse give you geometric selections. With Ellipse, hold a finger on the screen while dragging to constrain to a perfect circle.
The straight-edged outline of a product, logo, or architectural element is a good case for Freehand.
Add and subtract from a selection
Cutouts rarely come together in one pass. Use the add and subtract options to refine the shape. Tap the minus before closing a new outline to subtract it from the current selection. Tapping the starting dot closes the outline and adds it to whatever is already selected.
Cut, Copy, and Clear Selections
Procreate handles these actions through gestures rather than a tap-and-hold menu:
- Three-finger swipe down (or up) opens the Cut / Copy / Paste menu.
- Cut removes the selected pixels from the layer.
- Cut & Paste removes them and puts them on a new layer.
- Copy & Paste duplicates the selection to a new layer and leaves the original untouched.
- A three-finger scrub (a side-to-side zigzag) clears the selection's contents. With no active selection, it clears the entire layer.
Those gestures can feel awkward if you work with a stylus in your dominant hand. Any three fingertips work, and they can come from either hand, so a smudge guard glove with three exposed fingertips is enough. If the menu doesn't appear, make sure all three fingers are touching the screen at the same time.
Cut & Paste is usually the better choice for production work. It gives you the extracted subject on its own layer and leaves the layer underneath with a hole, which you can inspect, move, or delete.
Cut an Image into a Shape
To crop a photo into a circle, rounded rectangle, or any custom shape:
- Put your image on one layer.
- Add a new layer above it and draw your shape there (or use Ellipse/Rectangle selection and fill it with any color).
- Lower the shape layer's opacity so you can see the image beneath it, and use Transform to position the shape precisely.
- Tap the shape layer and choose Select. The shape is now an active selection.
- Tap the image layer. The selection persists across layers.
- Swipe down with three fingers and choose Cut & Paste.
- Hide or delete the original image layer.
The result is the image clipped to your shape on a transparent layer. Note that the selection stays active when you switch layers, which surprises many people. If you're seeing marching ants where you don't expect them, that's why.
Use Masks Instead of Deleting Pixels
Cut and clear are destructive. If you may need the hidden pixels later, use a mask:
- Layer mask: tap the layer and choose Mask to hide parts of the layer without deleting them, so you can restore them any time.
- Clipping mask: put your image layer above a shape layer, tap the image layer, and choose Clipping Mask. The image is visible only where the base layer has pixels. This is the fastest way to fit a photo or texture into a shape and change the shape later.
- Alpha Lock: tap the layer and choose Alpha Lock to restrict painting to existing pixels, which is useful for recoloring a cutout without spilling outside it.
For anything that will go to a client or into a larger composite, masks save a lot of rework.
Lift a Subject from a Photo
Procreate doesn't have a one-tap background remover built into its Selection tool. A common workaround uses iPadOS itself:
- Open Procreate and put Photos in Slide Over (tap the three dots at the top center of the app window).
- In Photos, touch and hold the main subject until an outline appears.
- Drag the lifted subject into your Procreate canvas.
- Clean up the edges with the Eraser and a soft brush.
This is fast for portraits and clear subjects, but results depend on the photo and the system's subject detection. Hair, motion blur, glass, and low-contrast edges will need manual repair. Always zoom in and inspect the edge at 100% or higher before relying on it.
Another option is to run the image through an outside background-removal service or an image editor and import the transparent PNG. That's fine for stills, but check edge quality the same way.
Clean Up Edges and Avoid Quality Loss
A cutout is only as good as its edge. A few habits help:
- Work at full resolution. Don't downscale before cutting. Set the canvas to the source image's dimensions if you can.
- Use bicubic interpolation. When you scale or rotate a cutout with Transform, check the interpolation setting (the circle with dots next to Reset). Bicubic avoids the jagged, warped look you get from nearest neighbour.
- Refine with Warp, Distort, and Liquify. When you cut two images apart and recombine them, Distort changes perspective, Warp pushes sections together, and Liquify's Push mode handles finer adjustments.
- Blend seams with a soft brush at low opacity if you've merged two cut pieces and want the join to disappear.
- Duplicate before merging. Keep a copy of every layer you cut from, so a bad merge doesn't cost you the original.
Export Cutouts for After Effects and Nuke
Procreate's value to motion work is usually as a source of hand-made elements: painted textures, character parts, mattes, and styleframes. Here's how to get cutouts out cleanly:
- PNG preserves transparency. Hide the background color layer in the Layers panel before exporting, or the PNG will have a solid fill.
- Check the white-background trap. If a circular or shaped image looks fine on white but shows a square when printed or placed on a colored background, the image probably has a background fill rather than true transparency. Confirm the checkerboard is visible behind your artwork.
Once in After Effects, you can animate the layers with puppet pins, parenting, and expressions the way you would with any illustrated asset. If a cutout edge looks rough at 4K, re-select and refine it in Procreate at higher resolution rather than trying to fix it in the comp.
Where Styleframe Fits After the Cutout
Procreate is good for hand-built cutouts of stills. For moving footage and generated imagery, you need different tools. is an AI video and motion tool built around artistic control rather than one-click output. Every generation is driven by your own reference images, video clips, and keyframes, and iteration is non-destructive, so you can keep exploring without losing earlier versions.
A few parts of it overlap with what you've just done in Procreate:
- Remove Background handles subject isolation, which is useful when you need cutouts from video-sourced or generated material rather than a still photo.
- Frames-to-Video is keyframe-driven, so a cutout character or element you've prepared in Procreate can serve as a keyframe or reference, and you decide how it moves between frames.
- Restyle and Ink-and-Paint apply reference-driven style transfer, which lets you push footage or renders toward the look of your hand-drawn work.
- 2D-to-3D and Turntable extend a flat design into a rotating view, and 4K Upscale gets the result to production-ready resolution.
It fits into an existing pipeline instead of replacing it. Styleframe exports image sequences, so the output drops into After Effects or Nuke for compositing, grading, and final delivery. Your Procreate cutouts stay as the hand-crafted layer, and the rest of the compositing workflow stays yours.
Troubleshooting Common Cutout Problems
- Selection disappears when closing the outline. It hasn't vanished. The outline is now an active selection. You can add to it or subtract from it.
- Cut and Paste menu won't appear. Use three fingers, swipe down or up, and make sure a selection exists if you want a cut rather than a layer clear.
- The wrong layer is cut. Selections persist across layers, so confirm which layer is active before you swipe.
- Selection distorts when moved. Use the green rotation handle to rotate, and place your pencil outside the shape to move it without resizing. Check that Uniform is on in Transform.
- Edges look jagged. Use bicubic interpolation and tidy edges with a soft Eraser.
- Background reappears on export. Hide the background color layer, and export as PNG.
Quick Summary
For clean cutouts in Procreate: select with Automatic or Freehand, refine by adding to and subtracting from the selection, then use Cut & Paste to isolate the result on its own layer. Use masks when you want to stay non-destructive, check the edges at full zoom, and export as PNG with the background hidden. From there, bring the elements into After Effects or Nuke, or into a Styleframe project when they need to become motion.