How to Cut Path in Illustrator
StyleFrame Team9 min read
To cut a path in Illustrator, select the path and click it with the Scissors tool (C) to break it at that point, or drag the Knife tool across a filled shape to slice it into separate closed shapes. For precise results, select anchor points with the Direct Selection tool (A) and click "Cut path at selected anchor points" in the Control panel. To cut overlapping shapes against each other, use Pathfinder (Divide or Trim) or the Shape Builder tool (Shift+M).
Each method behaves differently on open versus closed paths and on filled versus unfilled objects, which is where most "why won't it cut?" problems come from. This guide covers each tool, when to use it, and how to get the cut geometry into After Effects cleanly.
What "cutting a path" means in Illustrator
Illustrator uses several words for related operations:
- Cutting or splitting breaks a path at one or more points. The anchor points stay, and the segments become independent.
- Dividing slices overlapping shapes along their intersections and leaves you with separate pieces.
- Trimming deletes the hidden portions of shapes that sit behind others.
- Erasing removes sections of a path or shape by dragging across it.
Illustrator also uses "cut path" in the print world to mean a closed vector contour that tells a plotter where to cut a sticker. That is a different job, covered near the end, because the same Offset Path technique is handy for motion work too.
Method 1: The Scissors tool
The Scissors tool is the most direct way to break a path at an exact location.
- Select the path with the Selection tool (V) or Direct Selection tool (A).
- Choose the Scissors tool (C). It is grouped with the Eraser and Knife in the toolbar, so you may need to click and hold to reveal it.
- Click on an anchor point or a spot on a segment.
- Switch to the Direct Selection tool and move or delete the pieces you separated.
Some behaviors to know:
- Clicking a closed path once with the Scissors turns it into an open path, with two coincident endpoints at the cut. Nothing visually separates until you move one of them.
- To split a closed shape into two open paths, click it at two different points.
- Clicking a segment (not an anchor) adds a new anchor point and breaks the path there. The curve's shape is preserved.
- If the Scissors seems to do nothing, zoom in. The click needs to land on the path itself, and a near miss on a thin stroke is common.
For motion work, the Scissors is the right tool for preparing stroke paths you plan to animate, since open paths work well with Trim Paths in After Effects.
Method 2: Cut at selected anchor points
When you need accuracy rather than a click-and-hope approach, use the Control panel option.
- Use the Direct Selection tool to select one or more anchor points on a path.
- In the Control panel at the top (or the Properties panel), click Cut path at selected anchor points.
- Each selected anchor is split into two overlapping anchors, and the path is broken there.
This is the cleanest method when the cut has to land on a specific existing point, such as the apex of a curve or the junction of a letterform. The new endpoints sit exactly on top of each other, so drag one away with the Direct Selection tool to confirm the break. Selecting several anchors first lets you cut a path into multiple segments in one move.
Method 3: The Knife tool
The Knife cuts across shapes in a freehand stroke, like running a blade through a cookie.
- Select the object you want to cut. If nothing is selected, the Knife cuts every filled object under the stroke.
- Choose the Knife from the Eraser group (it may live in the Advanced toolbar if you are using the Basic one).
- Drag across the shape. Hold Alt/Option before you start dragging to constrain the cut to a straight line.
- The shape is divided into separate closed shapes, each keeping the original fill.
Recent Illustrator versions let the Knife snap to Smart Guides, which helps with symmetric or aligned cuts. Make sure Smart Guides are on (View > Smart Guides, or Cmd/Ctrl+U).
One limitation catches people out: the Knife only cuts filled objects. A path with only a stroke and no fill won't be sliced. If you need to cut a stroke-only path, add a temporary fill, use the Scissors instead, or convert the stroke with Object > Path > Outline Stroke first. Outlining turns it into a filled shape, but it also removes the live stroke, which you will lose for Trim Paths-style animation.
Method 4: The Eraser tool
The Eraser (Shift+E) removes whatever you paint over, and it works on paths as well as filled shapes.
- Select the objects first if you want to limit the effect. Otherwise it erases everything it touches.
- Hold Shift to erase in a straight line.
- Double-click the tool icon to set angle, roundness, and size.
Erasing leaves editable vector shapes with new anchors along the erased edge. It is quick for rough work, but the anchors it generates can be messy, so inspect the result with Outline view (Cmd/Ctrl+Y) before you send anything to After Effects. Extra points make shapes harder to animate with path keyframes.
Method 5: Pathfinder Divide and Trim
When several overlapping shapes need cutting against each other, Pathfinder (Window > Pathfinder) is faster than slicing by hand.
- Divide cuts all selected shapes along every overlap and returns separate, grouped pieces. Ungroup (Shift+Cmd/Ctrl+G) to work with them individually.
- Trim removes hidden parts of filled shapes behind others and strips strokes, leaving non-overlapping shapes.
- Minus Front subtracts the top shape from the bottom one, which is useful for cutting a hole or notch with a custom shape.
A common motion design use is a "cutter" shape: draw the shape you want to remove, place it on top, and use Minus Front. It is reproducible, and you can edit the cutter and redo the operation if you hold the original on a hidden layer.
Method 6: Shape Builder
The Shape Builder tool (Shift+M) lets you split and merge overlapping regions interactively.
- Select the overlapping shapes.
- Choose the Shape Builder.
- Click or drag across regions to merge them, or hold Alt/Option and click a region to delete it.
It is the quickest way to carve out pieces of an illustration into separate shapes, for example to split a logo into parts you plan to animate individually in After Effects. Because it works on the visible regions, you do not need to think in terms of cutting lines.
Creating a cut contour with Offset Path
For die-cut stickers, print shops need a closed vector path around the artwork. The common process also serves as a quick way to build a clean outline or matte shape for motion work:
- Duplicate your artwork onto a new layer named "cut" and lock the original.
- Select everything on the cut layer and click Unite in Pathfinder to merge it into one shape.
- Apply Object > Path > Offset Path, set the distance, and choose Round joins for a smooth contour.
- Unite again to merge the result, and delete or fill any interior holes if you want a solid outline.
- Give the path a spot-color stroke (many printers ask for magenta) and remove the fill.
Check your printer's file requirements, since naming and color conventions vary. For motion, the same contour works as a track matte, a stroke-based outline, or a base for a sticker-style animated border.
Getting cut paths into After Effects
Once your paths are cut the way you want, there are two reliable routes into After Effects:
- Create Shapes from Vector Layer. Import the .ai file as a footage item, drop it in a comp, then choose Layer > Create > Create Shapes from Vector Layer. Each path becomes an editable shape with fills and strokes, which you can animate with Trim Paths, path keyframes, or Repeaters.
- Copy and paste. Copy paths in Illustrator and paste them into a composition. Depending on whether a layer is selected, they usually arrive as a shape layer or as masks on the selected layer, so check what you got.
Some prep helps either route:
- Keep cuts clean. Delete stray overlapping anchors left by the Scissors or Eraser, since duplicate points make path morphing unpredictable.
- Match anchor counts for morphs. If you plan to morph one path into another with path keyframes, the shapes need the same number of vertices, so cut and simplify with that in mind.
- Name layers and groups. Organized naming in Illustrator carries into After Effects and saves time when you have dozens of pieces.
- Use open paths for draw-on effects. Trim Paths needs a path with a start and end, so a closed shape should be cut open before you animate a reveal.
Where Styleframe fits when vector art feeds motion
Cutting paths gives you precise, editable geometry. Sometimes the next step is not more vector work but stylizing, extending, or re-rendering that artwork as footage. is an AI video and motion tool that may fit that step in your workflow.
Your cut vector shapes remain the precise layer you animate, and a tool like Styleframe can handle the stylized or generated layer around them.
Troubleshooting common problems
- The Knife does nothing. The object likely has no fill. Add a fill or use the Scissors.
- The Scissors cut, but nothing moved. The endpoints overlap. Drag one away with the Direct Selection tool.
- Pieces fuse back together. You may have used Unite or Merge on shapes with matching fills. Use Divide instead and ungroup.
- Cuts look jagged. Zoom in and check for extra anchor points, then use Object > Path > Simplify or delete the extras manually.
- Compound paths won't cut as expected. Release them (Object > Compound Path > Release), cut, then recombine.
Quick reference
Pick the tool based on whether you are working with open or closed paths, and whether you have fills or only strokes. Clean the result before moving to After Effects, and the cut paths will animate predictably.