How to Cut Out Shapes in Procreate
StyleFrame Team8 min read
To cut out a shape in Procreate, pick the Selection tool (the S icon), choose Freehand, Rectangle, Ellipse, or Automatic, outline the area, then swipe down with three fingers and tap Cut & Paste to move it onto its own layer. For a reversible version, turn the selection into a layer mask instead of deleting pixels. Export the result as a transparent PNG or a layered PSD so it drops straight into After Effects, Premiere Pro, or Nuke.
Before you start: set up the canvas for a clean cut
Cut-outs are raster, so the edge quality you get is the quality of the canvas you cut from. A few settings save trouble later:
- Canvas size: Build the canvas at or above your delivery resolution. If the shape will be animated or scaled up in After Effects, go bigger than you think you need.
- Color profile: Procreate's default color profile may not match your comp's working space. Decide this up front, because a mismatch shows up as shifted color once the PNG lands in your timeline.
- Layer structure: Keep the source art on its own layer and never cut directly into your only copy. Duplicate it first.
Method 1: Cut out a shape with the Selection tool
This is the core workflow and covers most cases.
- Tap the Selection tool (S icon) in the top bar.
- Choose a mode at the bottom: Freehand for custom outlines, Rectangle or Ellipse for geometric shapes.
- With Freehand, draw around the area and close the loop by returning to your start point. Procreate fills the selection with the diagonal hatch pattern to show what's selected.
- Use Add and Remove to correct the selection without starting over.
- Swipe down with three fingers to open the Copy & Paste menu.
- Tap Cut & Paste to lift the selection onto a new layer, or Cut to delete the pixels and leave a transparent hole.
If you only need the shape duplicated, choose Copy & Paste instead. The original stays intact, which is safer when you're still experimenting.
Moving the cut piece without distorting it
A common complaint is that the selection warps or resizes when you try to move it. Two habits fix most of this:
- Open the Transform tool (arrow icon) and place your pencil outside the selection shape when you drag it, so it moves without resizing. Dragging a corner handle resizes it, and the green handle rotates it.
- Set the transform resampling to Bicubic rather than bilinear or nearest neighbor. Bicubic keeps edges smoother when you scale or rotate.
If snapping makes it hard to place pieces precisely, turn it off in the Transform tool's settings.
Method 2: Cut perfect geometric shapes
For circles, rectangles, and other clean primitives, you have two options.
Selection modes. Rectangle and Ellipse selections give you exact geometric cut-outs in a couple of taps. Use them for badges, frames, circular avatars, and window shapes.
QuickShape plus selection. Draw a shape on a new layer and hold at the end of the stroke so Procreate snaps it to a clean form. Fill it, then use it as a stencil. Tap the layer, choose Select, and the shape becomes a selection you can apply to other layers. You can also use that layer as a mask source (more below).
This is useful when you want an irregular but repeatable silhouette, like a custom blob or badge, that you can reuse across multiple pieces of artwork.
Method 3: Use Automatic selection for flat color areas
When the shape you want is a distinct, flat color region, such as line art with filled areas or a logo, Automatic mode is much faster than tracing:
- Open the Selection tool and choose Automatic.
- Tap inside the area you want. Drag your finger or pencil sideways to adjust the threshold: lower values grab only near-identical colors, higher values spread further.
- Add or remove regions as needed, then use Feather to soften edges if the cut looks harsh.
- Cut & Paste as before.
Automatic works poorly on photographic gradients and textured paint, where the threshold either leaks or leaves ragged holes. For those, trace with Freehand and refine afterward.
Non-destructive cut-outs with masks
Cutting deletes pixels, which is risky if you change your mind. For anything you'll revise, use masks instead:
- Make your selection with any of the methods above.
- Tap the layer, then choose Mask. Procreate applies the selection as a layer mask, hiding everything outside it.
- Paint on the mask with black to hide more or white to reveal more.
A related approach is a clipping mask. Draw your shape on one layer, then place artwork on a layer above it and choose Clipping Mask. The artwork only appears where the base shape has pixels. Swap the base shape later and the clipped artwork follows, with no erasing required. Alpha Lock achieves something similar for painting inside an existing shape on a single layer.
For motion work, this matters. Revision rounds often change a shape's outline, and a mask lets you adjust without redrawing.
Cutting a subject out of a photo
Procreate has no dedicated background-removal button, but there are two practical workarounds.
Lift the subject from Photos. Open the photo in your iPad's Photos app, touch and hold the main subject until the outline appears, then drag it into Procreate using Slide Over. The cut-out drops onto your canvas, where you can tidy details with the eraser. Results depend on the system's subject detection, so expect to clean up edges on tricky images.
Trace manually. For difficult edges, use Freehand selection with Add/Remove, then refine the mask. Zoom in with a pinch and work at the pixel level. A soft eraser or mask brush at low opacity gives more natural edges than a hard one.
Clean up the edges
Rough edges are what make cut-outs look amateur once they're composited. Before exporting:
- Feather lightly. A very small feather avoids stair-stepping on curves without turning the edge to mush.
- Check on contrasting backgrounds. Put a dark layer and a light layer behind the cut-out and toggle between them. Fringes you can't see on one are obvious on the other.
- Erase stray pixels. Use the Eraser at a small size for orphaned specks, or paint on the mask.
- Avoid scaling up afterward. Resizing a cut-out upward softens the edge. Cut at final size where possible.
Export for After Effects, Premiere Pro, and Nuke
How you export depends on what happens next:
- Transparent PNG: Hide the background layer (or turn off the background color in the Layers panel) and share as PNG. This is the simplest option for a single element.
- Layered PSD: Export as PSD to keep layers separate so you can animate individual cut-outs in your compositor. Check how masks come through, since complex blend modes and some mask behaviors may not translate exactly.
- Animated work: If you're animating, export frames as a numbered PNG sequence, which most compositors can import.
Before sending anything downstream, confirm the file has real transparency rather than a white or checkerboard background baked in.
Where Styleframe fits when Procreate's cut-outs aren't enough
Procreate is excellent for hand-controlled cut-outs on stills and illustration. Limits appear when you're working at motion scale: you need the same isolation across many frames, you need to restyle a cut-out consistently, or you need to take a flat piece of artwork further.
is an AI video and motion tool built around artistic control rather than one-click black-box output. A few of its tools line up with this workflow:
- Remove Background isolates subjects from imagery so you aren't tracing every edge by hand, which is handy for photographic reference or footage-based elements you'd otherwise struggle to cut cleanly in Procreate.
- Restyle and Ink-and-Paint use reference images to transfer a look onto your material, so a Procreate cut-out can be pushed toward a consistent illustrated or painted style.
- Frames-to-Video is keyframe-driven: you supply start and end frames, such as two Procreate states of the same cut-out, and generate the motion between them.
- 2D-to-3D and Turntable extend a flat cut-out into a form you can view from other angles.
- 4K Upscale helps when a small cut-out needs to hold up at higher resolution.
Generation is driven by your references, clips, and keyframes. You keep your compositing pipeline and use Styleframe for the generative and style-transfer steps around it.
A sensible split: do precise, intentional shape work in Procreate, then bring those assets into Styleframe when you need motion, restyling, or higher resolution, and finish in your compositor.
Troubleshooting common cut-out problems
The selection won't close. In Freehand mode, make sure your final point returns to the starting point. Zoom in for tight shapes.
The cut-out looks blurry after moving it. Check that resampling is set to Bicubic and avoid repeated scale-up and scale-down transforms, which degrade pixels each time.
There's a white or colored halo. The source had background color blended into edge pixels. Shrink the mask slightly, erase the fringe, or cut from a cleaner source.
Pieces shift or resize when you try to move or rotate them. Use the green rotation handle to rotate, and place the pencil outside the shape when moving it instead of dragging inside the selection.
The PNG exports with a background. Hide the Background Color layer in the Layers panel before exporting.
Quick workflow recap
- Duplicate your source layer.
- Select with Freehand, Rectangle, Ellipse, or Automatic.
- Refine with Add, Remove, and Feather.
- Cut & Paste for a quick result, or apply a Mask for a reversible one.
- Clean the edges against light and dark backgrounds.
- Export as PNG, PSD, or an animation frame sequence for your compositor.
Once the selection habits are in place, cutting shapes in Procreate takes seconds, and the mask-based approach keeps the work flexible when the client changes the brief.