How to Cut Out an Object in Procreate
StyleFrame Team8 min read
To cut out an object in Procreate, open the Selection tool (the S icon), outline the object with Automatic or Freehand, and close the selection by tapping the starting dot. Swipe three fingers down to open the Cut, Copy & Paste menu, then choose Cut & Paste (or Copy & Paste) to move the object to its own layer. Hide the original layer and export as PNG to keep a transparent background. Procreate is a painting app rather than a matting tool, so it works best for illustrations, graphic elements, and clean-edged subjects.
Cut Out an Object with the Selection Tool
This is the core workflow, and everything else builds on it.
- Import your image or open your artwork. Make sure the object sits on its own layer, or at least that you know which layer you're working on.
- Tap the Selection tool in the toolbar. The selection modes appear at the bottom of the screen: Automatic, Freehand, Rectangle, and Ellipse.
- Pick a mode (see the next section) and select the object.
- Swipe down with three fingers to open the Cut, Copy & Paste menu.
- Choose Cut & Paste to lift the object onto a new layer and remove it from the original. Choose Copy & Paste to duplicate it and leave the source untouched.
- Hide or delete the original layer. The object is now isolated on a transparent layer.
For production work, use Copy & Paste almost every time. It keeps the source image intact, so you can redo a bad selection without re-importing anything.
Pick the Right Selection Mode
The mode you choose determines how much cleanup you'll do afterward.
Automatic
Automatic selects areas based on color similarity. Tap or drag inside a region and Procreate fills the selection to the edge of similar pixels. It's fast for flat illustration, logos, and objects against a plain background. It struggles with gradients, soft shadows, and busy photos, where the selection leaks or stops short.
If Automatic keeps grabbing the wrong area, temporarily change the surrounding colors or contrast so the tool can tell the object from its background. That's a workaround, but it works on simple art.
Freehand
Freehand lets you draw around the object by hand. Drag a path, or tap to place straight-edged points, then close the loop. It's slower but gives you control over every edge, which makes it the better option for photographs and irregular shapes.
Closing the loop trips up many new users. When you tap the starting dot, the marching-ants outline "vanishes" because the selection has been completed, not deleted. You'll see the selected area highlighted and the rest hatched.
Rectangle and Ellipse
Use these for geometric cutouts. Hold a finger on the screen while dragging to constrain the ellipse to a perfect circle.
Add and Remove
Real objects rarely select perfectly on the first pass. Use Add to include missed areas and Remove to subtract areas you grabbed by mistake. Tap Remove before you close a new loop, and that loop is subtracted from the existing selection instead of added to it. Build complex cutouts in several passes rather than one perfect trace.
Refine the Selection Before You Cut
A few settings save time later:
- Invert flips the selection, which is useful when it's easier to select the background than the subject.
- Zoom in while tracing. Selecting at fit-to-screen zoom is the most common cause of rough edges.
Cut Out a Subject from a Photo with Slide Over
Procreate has no dedicated background-removal button in the tutorials most people follow, but iPadOS can lift a subject from a photo for you. This method skips manual selection entirely:
- Create your Procreate canvas first, at the dimensions you need.
- Open the Photos app (or Files) using Slide Over, so it floats alongside Procreate.
- Open the photo, then touch and hold the main subject until an outline appears.
- Drag the lifted subject onto your Procreate canvas. It arrives as a transparent cutout on a new layer.
- Clean up any rough edges with the Eraser.
The result depends on how clearly the system identifies the subject. Hair, motion blur, semi-transparent objects, and low-contrast edges are where it falls apart. Treat it as a fast first pass, not a finished matte.
Cut an Image into a Shape
Sometimes you don't want to isolate an object but crop an image into a shape such as a circle, a badge, or a custom silhouette.
- Put the image on one layer.
- Add a new layer above it. Use the Selection tool in Ellipse mode (or draw any shape) and fill it with any color.
- Lower the shape layer's opacity and use Transform to position it exactly where you want the crop.
- Tap the shape layer and choose Select. This loads the shape as an active selection.
- Tap back onto the image layer. The selection stays active.
- Tap Invert, then swipe three fingers down and choose Cut. Everything outside the shape is removed.
- Delete or hide the shape layer.
For a non-destructive version, use a mask instead. Draw the shape on a layer, set the image layer above it as a Clipping Mask, and the image only shows inside that shape. You can reposition or edit the shape at any time without erasing pixels. This is the better approach if the cutout might change later.
Clean Up the Edges
Selections give you hard edges, and hard edges are what make cutouts look pasted on. Before you export:
- Zoom in and use the Eraser with a hard-edged brush to remove stray pixels.
- Check your cutout against both a light and a dark background. Fringing from the original background shows up differently on each.
- If you transform the cutout (scale, rotate, warp), set the Transform interpolation to Bicubic. Bilinear and Nearest Neighbor can make scaled edges look jagged or blurry.
- Use a soft eraser sparingly to blend edges that look too sharp.
If you move the cutout around with the transform handles, keep your Apple Pencil outside the bounding box when dragging. This helps you move it without accidentally resizing it. Turning off snapping also makes freehand placement easier.
Export a Cutout with Transparency
A cutout is only useful if it leaves Procreate cleanly.
- PNG preserves transparency. Before exporting, hide the original image layer and turn off the Background Color layer in the Layers panel. If the background color is left on, you'll export an opaque rectangle.
- PSD keeps layers intact, which is the better choice if you want to adjust the cutout in After Effects or Photoshop.
- Check your canvas size before you start, because upscaling a small cutout later softens it.
A common print-related problem is a circular design that shows a square background on non-white paper. This happens when the file is flattened or the transparency isn't preserved. Export as a transparent PNG and place it in your layout tool, rather than relying on a white background that happens to match.
Using Procreate Cutouts in After Effects and Other Pipelines
For motion designers, Procreate is usually a source for assets rather than a final stage. A few practical notes:
- Split the object into parts. If you plan to rig or animate it, cut it into separate layers in Procreate (head, arm, torso) before export. It's much easier than slicing a flat cutout later.
- Work at a high resolution. Procreate cutouts are raster, so scaling up in a 4K comp will expose the edges. Build the canvas at the largest size you expect to need.
- Check the premultiplication. Dark or light fringes at the edge usually mean you need to adjust how the alpha is interpreted in your compositing app, or choke the matte slightly.
Where Procreate Falls Short
Procreate's selection tools are made for artwork, and that's where they perform best. They're a weak fit when:
- The subject has fine detail like hair, fur, or smoke.
- You have many images to process, since every cutout is manual work.
- The source is video, not a still. Procreate can't track a selection across frames.
- You need consistent edges across a set of assets.
For stills, people sometimes turn to web tools such as remove.bg or batch-process color-to-alpha in GIMP. These work for simple backgrounds, but they're a separate step outside your main pipeline.
Quick Troubleshooting
- Selection disappears when I tap the start point. You closed the loop. This is expected. Use Add or Remove to modify it.
- Cutout looks pixelated after resizing. Switch Transform interpolation to Bicubic and avoid scaling up.
- Exported PNG has a white background. Hide the Background Color layer and the original image layer before exporting.
- Automatic selects the wrong region. Zoom in, adjust the threshold by dragging further, or switch to Freehand.
- Selection moves or distorts when I drag it. Drag from outside the bounding box and check that Transform is set to Uniform, not Freeform.
Mastering a few moves covers most cases: select with the right mode, Copy & Paste to a new layer, refine the edge, and export a transparent PNG or layered PSD. From there, the cutout is ready to animate in After Effects or any other tool in your pipeline.