How to Cut Around an Image in Procreate
StyleFrame Team9 min read
To cut around an image in Procreate, tap the Selection tool (the S icon), trace the subject in Freehand mode or tap Automatic, and close the outline by tapping the starting dot. Then swipe down with three fingers and choose Cut, or Copy & Paste to move the subject onto its own layer. Hide the background layer and export as PNG to keep the transparent cutout.
The rest of this guide covers each selection mode, how to keep the cut non-destructive, how to clean up edges, and how to get the result into an After Effects, Premiere Pro, or Nuke pipeline.
The Basic Workflow: Select, Cut, Isolate
Procreate has no single "cut out" button. A cutout is a selection followed by an action on that selection, and the steps are the same whether the image is a photo, a scan, or your own artwork.
- Import the image. Open the Actions menu (wrench icon), choose Add, then Insert a Photo or Insert a File. The image arrives on its own layer.
- Activate the layer. Selections act on the active layer only. If nothing seems to happen, check which layer is highlighted.
- Open the Selection tool. The S-shaped icon in the top toolbar opens a selection bar at the bottom of the screen.
- Pick a mode and outline the subject. The modes are covered below.
- Close the selection. Tap the first dot of your outline, and the "marching ants" appear around the selected area.
- Apply the action. Swipe three fingers down to open the Cut, Copy, and Paste menu. Cut removes the pixels from the layer. Copy & Paste duplicates the selected area onto a new layer.
Copy & Paste is usually the better choice. The original photo stays intact underneath, and you can hide it to check the cutout.
Choosing the Right Selection Mode
The selection bar offers four modes. Each suits a different kind of edge.
Freehand
Freehand is the mode for tracing around an image by hand. Drag your Apple Pencil or finger around the subject, and Procreate connects the points. Tapping individual points gives straight segments, which suits hard-edged objects like products, signage, and architecture. Dragging a continuous stroke gives a curved path, which suits organic shapes.
A common frustration is that the outline seems to vanish when you tap the starting dot. It hasn't. Tapping the dot closes the shape and converts it into a finished selection, so the outline is replaced by the marching ants. To subtract from a selection, tap the Remove button before you close the shape.
Automatic
Automatic selects by color similarity. Tap a region, then drag left or right to adjust the threshold. It works well on subjects against flat or evenly lit backgrounds and poorly on busy photographic ones. If the tool keeps leaking into the subject, try raising the contrast between subject and background first, either by adjusting the image or by painting a flat color behind it on a temporary layer.
A practical trick is to select the background with Automatic and then tap Invert. For a subject on a plain backdrop, that's often faster than tracing the subject itself.
Rectangle and Ellipse
These are for geometric cuts: circular avatars, rounded badges, or a rectangular crop of one layer. They're also useful for adding to or subtracting from a freehand selection, for example to remove a rectangular chunk you've accidentally included.
Refining a Selection Before You Cut
Cutting immediately usually leaves jagged or haloed edges. Spend a minute on the selection first.
- Add and Remove. Use these to build the selection in passes. Trace the main body roughly, then add or subtract small areas such as hair gaps and the spaces between fingers.
- Zoom in. Pinch to zoom and work on small sections. A selection traced at fit-to-screen zoom will be imprecise at export size.
- Feather. The Feather control softens the selection edge. A small amount hides stair-stepping on curves, but too much leaves a visible glow of the old background around the subject.
- Invert. Use it to switch between selecting the subject and selecting everything but the subject.
- Save & Load. If a selection took a long time to build, save it so you can reload it after an accidental tap.
Keeping It Non-Destructive: Masks Instead of Cut
Cut and Erase are destructive. If you realize ten minutes later that you clipped a piece of the subject, you either undo or repaint. A layer mask avoids that.
- Make your selection around the subject.
- Tap the image layer and choose Mask. Procreate applies the selection as a mask, hiding everything outside it.
- Select the mask thumbnail and paint with black to hide more, or white to reveal pixels you hid by mistake.
This lets you refine the edge over time. It also keeps the full original image on the layer, so you can expand the cutout later if a client asks for more of the subject. For stacking elements on top of a cutout shape, Procreate's Clipping Mask and Alpha Lock work in a similar way. You draw a base shape, then clip layers above it so paint only appears inside that shape.
Moving and Transforming the Cutout
Once the subject sits on its own layer, use the Transform tool (the arrow icon) to scale, rotate, and reposition it.
- Drag the green rotation handle to rotate. To move without resizing, touch the canvas outside the shape rather than the corner handles.
- Check the interpolation setting in Transform. Bicubic generally gives the cleanest result when scaling.
- Turn off Snapping if it fights you while you place elements.
- Warp and Distort let you bend a cutout to fit a surface, and Liquify can push small areas into place.
Scaling a raster cutout up softens it. If you plan to scale a cutout significantly, work from the largest source image you have.
A Faster Route: Lifting the Subject from Photos
For photographs, there's a quicker method than manual tracing. It relies on iPadOS rather than Procreate, but it works well alongside it.
- Put Procreate and the Photos app side by side using Slide Over or Split View.
- In Photos, touch and hold the main subject until an outline appears.
- Drag the lifted subject onto your Procreate canvas.
The result is a transparent-background cutout on a new layer. It handles clear subjects like people, pets, and products well, and struggles with complex edges such as fine hair or similar-colored backgrounds. Treat the result as a first pass and clean it up with the Eraser or a layer mask.
Cleaning Up Edges
Whatever method you used, check the cutout against both a light and a dark background. Edges that look fine on white often show fringes on dark.
- Add a temporary solid-color layer beneath the cutout, then switch it between black, white, and a mid-tone.
- Use a hard-edged Eraser for crisp objects and a soft one for hair or fur.
- Lower the opacity of a soft eraser and work gradually near edges.
- For stubborn halos, zoom in close on the layer, then mask or erase the fringe pixels.
Exporting a Cutout with Transparency
A cutout is only useful if it leaves Procreate with its alpha channel intact.
- Hide the background color layer (in Layers, toggle off the Background color) and any reference layers.
- Open Actions, then Share, and choose PNG. JPEG flattens transparency onto a solid color.
- If you need a tight bounding box, use Actions, then Canvas, then Crop & Resize beforehand. Cropping applies to the whole canvas, not to individual layers.
If you want layers preserved for later editing, export as a PSD. Check your layers and masks after import into other software, since not every Procreate feature survives translation exactly.
Common Problems and Fixes
- Nothing gets cut. The wrong layer is active, or the selection never closed.
- The outline disappears. It closed correctly. Tap Remove or Add to modify it, or reselect.
- A white or colored fringe remains. Feather the selection slightly, or erase or mask the outer pixel edge.
- The canvas looks cropped, not the layer. Crop & Resize works on the whole canvas.
- A circular image shows a square when printed. Transparent PNG backgrounds can print as a visible box on non-white paper in some pipelines. Check how your destination handles alpha, or place the image over a matching background.
Where Cutouts Fit in a Motion Pipeline
Procreate is a good place to prepare still assets: hand-traced mattes, illustrated elements, and collage pieces. Cutouts typically go to After Effects as PNG or layered PSD, where you animate them with puppet pins, parallax, or 3D layers. The weak point is that stills cutouts are static, and sequences of frames still need a different tool.
This is where an AI video tool can complement a Procreate workflow rather than replace it. Styleframe (styleframe.ai) is built for artists who want control over generation. Every output is driven by your reference images, video clips, and keyframes, and iteration is non-destructive. A few of its tools are relevant to the problem of isolating subjects:
- Remove Background isolates subjects from stills or footage, which suits cases where hand-tracing every frame isn't practical.
- Frames-to-Video animates between keyframes you supply, so a cutout illustration from Procreate can become a start or end frame.
- Restyle and Ink-and-Paint apply a reference-driven style to footage or frames, which helps unify a cutout with surrounding material.
- 2D-to-3D and Turntable can turn a flat illustrated subject into something you can rotate around.
- 4K Upscale helps when a source cutout is smaller than your delivery resolution.
Styleframe exports image sequences, so the output drops into After Effects or Nuke for compositing. You keep your existing compositing workflow and use the tool where it saves manual labor, while Procreate stays the place for precise, hand-controlled cutouts.
Quick Reference
- Selection tool (S), then Freehand to trace, or Automatic for flat backgrounds.
- Tap the first dot to close the selection.
- Three-finger swipe down for Cut, Copy, and Paste.
- Prefer Copy & Paste or a layer mask over Cut.
- Feather lightly, and check edges on light and dark backgrounds.
- Hide the background and export PNG to keep transparency.
Once the select, mask, and export routine is habit, a clean cutout goes much faster, and the same assets carry straight into your compositing timeline.