How to Cut and Paste Procreate
StyleFrame Team9 min read
To cut and paste in Procreate, select the artwork you want to move, swipe three fingers down the canvas to open the Copy & Paste menu, and tap Cut. Swipe down again and tap Paste. The content lands on a new layer directly above your active layer. If you want to cut and paste in a single step, choose Cut & Paste from the same menu to lift the selection onto its own layer.
Cut and Paste in Procreate, Step by Step
- Pick the layer that holds the artwork in the Layers panel.
- Make a selection with the Selection tool (the S-shaped icon in the top bar) if you only want part of the layer. Skip this step to affect the whole layer.
- Swipe three fingers down the canvas, all at the same time.
- Tap Cut. The content is removed from the layer and stored on the iPad clipboard.
- Swipe down with three fingers again and tap Paste.
- Move the pasted layer with the Transform tool, or leave it where it landed.
Pasted content always arrives as its own layer above the one you had active. That behavior matters later when you prepare layers for animation.
Turn On and Customize the Three-Finger Gesture
The gesture is on by default in current versions. If nothing happens when you swipe, check the setting under Actions → Prefs → Gesture Controls → Copy & Paste. You can enable or disable the swipe there, and adjust it if it conflicts with other gestures.
A few practical notes:
- All three fingers need to touch the canvas at the same moment. A staggered touch is a common reason the menu fails to appear.
- Swipe downward, not sideways.
- If you work with a stylus and the gesture feels awkward, use one of the alternatives covered below.
What Each Copy & Paste Menu Option Does
The menu offers six actions, and choosing the right one saves a lot of layer-juggling.
Cut
Removes the selected artwork, or the whole layer if nothing is selected, and puts it on the clipboard. The original area is left empty.
Copy
Does the same as Cut but leaves the original in place. Use it when you want a second instance of an element.
Copy All
Copies everything visible on the canvas as a single flattened image. Hidden layers are not included, which makes this a quick way to grab a composite. It also works with a selection active, so you can capture just one region of a composite instead of a single layer.
Duplicate
Copies the layer or selection and pastes it as a new layer in one tap, leaving the original untouched. This is the fastest route for repeated elements like particles, background shapes, or alternate poses.
Cut & Paste
Removes the selection from its current layer and drops it onto a new layer immediately. This is the quickest way to separate one element from a layer where everything was painted together, for example pulling a character's arm onto its own layer for rigging later.
Paste
Places whatever is on the clipboard as a new layer above the active one. It works with content from the same canvas, another Procreate canvas, or another app, as long as the clipboard holds an image.
Cut Only the Part You Want
The most common frustration is cutting an entire layer when you meant to cut a selection. A few rules prevent it:
- Make the selection first, then cut. With a selection active, only that area is affected. You don't have to close a freehand selection for this to work.
- Don't tap Transform before cutting. Forum reports from older versions describe Transform mode causing the whole layer to be copied. Treat it as a habit to avoid: select, then use the menu, then transform afterward.
- Check the active layer. Cut and copy act on the layer you currently have selected, not on everything you can see. If the artwork lives on a different layer, you'll get an empty paste or the wrong content.
- Use Copy All for composites. When elements are spread across several layers and you want them as one image, use Copy All rather than cutting layer by layer.
Other Ways to Cut, Copy, and Paste
If the three-finger swipe doesn't suit your hardware or habits, Procreate gives you several other routes.
Selection Tool Toolbar
After you make a selection, the Selection tool's options include copy and paste. It's convenient when you're already working with selections and don't want to reach for the gesture.
Layer Options Menu
Tap a layer to open its options and choose Copy. This copies the entire layer's contents, or whatever you've isolated in a selection. It's reliable when you want to be sure which layer you're copying from.
QuickMenu
QuickMenu is off by default. Enable it under Actions → Prefs → Gesture Controls → QuickMenu, then choose how to trigger it. You can assign a radial slot to Paste, which turns it into a one-touch action. Many illustrators like this setup for speed.
Actions → Add
The Add tab in the Actions menu includes copy and paste options. Its Copy canvas option is equivalent to Copy All in the gesture menu. You can also use it to paste an image into the canvas.
Paste Between Canvases and Other Apps
Because cut and copy use the iPad clipboard, you aren't limited to the current document.
- To another Procreate canvas: Cut or copy, open the other artwork from the Gallery, then paste. It arrives as a new layer.
- To start a new canvas from the clipboard: Procreate's canvas presets include a Clipboard option that creates a document from an image you've copied.
- From another app into Procreate: Copy an image elsewhere on the iPad and paste it into your canvas. The first time you do this, iPadOS asks for permission. If you tapped the wrong answer, go to Settings → Apps → Procreate and enable Paste from other apps. That toggle only appears after you've pasted at least once.
- From Procreate into other apps: Pasting works in compatible apps such as email and chat. Results depend on what the destination app accepts.
A useful trick when you need a standalone element on a transparent background: select it, cut or copy it, create a new canvas from the clipboard, and export from there. That avoids carrying the rest of the illustration along.
Troubleshooting Cut and Paste Problems
- The menu won't open. Confirm the gesture is enabled in Gesture Controls, and keep all three fingers down together.
- The whole layer was cut. You likely had no active selection, or you were in Transform mode. Undo, make the selection, and try again.
- Paste does nothing. The clipboard may be empty or may contain non-image content. Copy again and retry.
- Paste from another app is blocked. Re-enable Paste from other apps in iPadOS settings, as described above.
- The pasted content is on the wrong layer. Paste goes above the active layer. Select the layer you want it above before you paste, or drag the new layer afterward.
- Edges look rough. Feathering or a hard selection edge can leave fringing. Refine your selection before cutting, particularly if the element will be composited elsewhere.
Using Cut and Paste in a Motion Pipeline
For motion designers, animators, and compositors, Procreate is often where concept frames, textures, and hand-drawn elements get made before everything moves into After Effects, Photoshop, Nuke, or Blender. Cut and paste is the cleanest way to prepare those assets there.
Some habits that help:
- Separate by motion, not by appearance. Use Cut & Paste to pull anything that will move independently (a limb, a prop, a background plate) onto its own layer before export.
- Name layers as you split them. Pasted layers come in generic, so rename them immediately. It saves time when you reopen the file in a compositor.
- Use Duplicate for variations. Drawing a hero shape once and duplicating it gives you consistent base elements for pattern work or secondary animation.
- Build isolated elements through the clipboard canvas trick. A fresh canvas with only the pasted element exports cleanly with transparency.
- Keep a flattened reference. Copy All gives you a single image of the composite, handy as a style reference or a locked-off keyframe.
Where Styleframe Fits After Procreate
Once your elements are cut, separated, and cleaned up, the next problem is often getting them to move without redrawing every frame. is an AI video and motion tool built for artists who want control over the result rather than a one-click black box. Every generation is driven by reference images, video clips, and keyframes that you supply, so a flattened Copy All frame from Procreate or a cleanly cut illustration can serve directly as an input.
Practical ways it connects to the Procreate work above:
- Frames-to-Video: Use frames from your Procreate artwork as keyframes and let the tool generate the motion between them, so your drawn poses define the start and end of a move.
- Restyle and Ink-and-Paint: Use your illustration as the style reference to carry its look onto video footage through reference-driven style transfer.
- 2D-to-3D and Turntable: Turn a flat character or prop you've isolated into a 3D form and get a turntable view for reference.
- Remove Background: Clean up elements that didn't come out of Procreate on transparency.
- 4K Upscale: Bring finished output up to production-ready 4K.
Iteration is non-destructive, so you can test several directions without losing earlier versions. Styleframe also fits into the pipeline you already have. It exports image sequences, so the results can drop into After Effects or Nuke for compositing. An After Effects plugin is on the way. You keep your compositing workflow, and the AI step becomes one controlled stage in it.
Quick Reference
Once the three-finger swipe is muscle memory, cut and paste in Procreate takes seconds. The key habits are selecting before you cut, knowing which layer is active, and picking the menu option that matches the result you want.