How to Cut a Shape in Procreate
StyleFrame Team9 min read
To cut a shape in Procreate, tap the Selection tool (the S icon), choose a mode such as Freehand, Rectangle, Ellipse, or Automatic, and outline the shape. Then swipe three fingers down and tap Cut & Paste to move the shape onto its own layer, or tap Clear to delete it. Use a layer mask instead if you want the cut to stay reversible, and export as PNG or layered PSD when the shape needs to go into After Effects or another compositing tool.
Cut a Shape in Procreate: Step by Step
- Select the layer that holds the artwork you want to cut. Selections act on the active layer only, so the wrong layer is the most common reason a cut seems to do nothing.
- Tap the Selection tool (the S icon in the top toolbar). The mode options appear at the bottom of the screen.
- Choose a mode (covered below) and draw or tap to define the shape. Marching ants show the selection edge.
- Refine it with Add, Remove, Invert, and Feather in the bottom toolbar.
- Swipe three fingers down to open the Copy & Paste menu. Tap Cut & Paste to lift the shape onto a new layer, Cut to remove it and keep it on the clipboard, or Copy & Paste to duplicate it.
- Tap the Transform tool (the arrow icon) to move, rotate, or scale the new layer.
That sequence covers most cases. The choices that matter are which selection mode you use and whether you want the cut to be destructive.
Choose the Right Selection Mode
Freehand
Freehand is the all-purpose lasso. Draw around the shape with a Pencil or finger and close the loop, and Procreate fills the selection. You can also tap to place points and build straight-edged polygons, which works well for geometric cutouts, shards, and hard-edged mattes. Zoom in before you start. Edge quality depends on how closely you can trace at your working zoom level.
Rectangle and Ellipse
These modes are the quickest way to cut clean geometric shapes. Drag to define the bounds, then use Add or Remove to combine shapes. Overlapping an ellipse with a rectangle, for example, gives you a pill or capsule cutout without drawing anything by hand.
Automatic
Automatic selects by color similarity. Tap or drag on an area of flat color and Procreate selects the contiguous region. The drag distance sets the threshold. It is best for flat illustration, line art with filled regions, and logos. It is less reliable on gradients or textured paintings, where it leaves ragged edges.
Adding and Removing
You rarely get a perfect selection in one pass. Switch between Add and Remove to build up a complex outline, and use Invert when it is easier to select the background and flip the selection than to trace the subject.
Cut vs. Clear vs. Mask
The method you pick decides whether you can undo the decision later. That matters for anyone used to non-destructive layers in After Effects or Photoshop.
- Cut & Paste moves the selected pixels to a new layer and leaves a hole in the original. Use it when you want to reposition or rotate a piece independently.
- Copy & Paste duplicates the pixels and leaves the original intact. This is the safer choice for experimenting.
- Clear deletes the selected pixels from the active layer. It is permanent apart from undo.
- Layer Mask hides pixels without deleting them. With a selection active, add a mask to the layer and the selection defines what stays visible. Painting black or white on the mask later restores or hides areas.
If you are building assets for animation, masks are usually the better choice. You can adjust the shape of a cut weeks later without repainting what was underneath.
Cut a Shape Using Another Shape
Procreate has no boolean path tools, so you build the same result from selections and layers.
Selection as a Cookie Cutter
Draw or select your cutter shape with Ellipse, Rectangle, or Freehand, then switch to the layer you want to cut and use Cut & Paste or Clear. Because the selection persists between layer changes, you can reuse one cutter on multiple layers. Tap Save & Load in the selection toolbar to store a selection you will need again.
Alpha Lock and Clipping Masks
Another approach is to draw the shape you want as a filled silhouette on its own layer. Then do one of the following:
- Alpha Lock that layer, so paint only appears inside the silhouette.
- Place the artwork on a layer above it and tap Clipping Mask, so the artwork only shows where the silhouette has pixels.
Moving or reshaping the silhouette layer then changes what shows through. This avoids a lot of cleanup erasing.
QuickShape
Draw a circle, line, or polygon and hold at the end of the stroke. Procreate snaps it to a clean geometric form. Fill it, then use it as a silhouette layer for clipping, or select it with Automatic and use it as a cutter.
Move and Rotate Without Distorting
Cutting is easy. Moving the piece without degrading it is where most people run into trouble.
- Rotate with the green handle at the top of the transform bounding box.
- Move without resizing by dragging from outside the bounding box or from the middle of the shape, not from a corner node.
- Switch Uniform to Freeform only when you actually want non-proportional scaling. Leaving it on Freeform by accident is a common reason a piece looks stretched.
- Turn off Snapping and Magnetics if the piece keeps jumping to guides while you place it.
- Set Interpolation to Bicubic in the Transform toolbar. Nearest Neighbor produces jagged edges, and Bilinear is softer. Bicubic generally keeps edges cleaner when you scale or rotate raster art.
- Use Distort or Warp when you need to bend the piece. Use Liquify when you need to push smaller areas into place.
Every transform resamples pixels, so rotating and scaling the same piece repeatedly softens it. Do the transform once, at the end, and keep a duplicate of the original layer before you start.
Clean Up Edges
A cut that looks fine at 100% can show a hard or stair-stepped edge once it is composited.
- Feather the selection slightly before cutting to soften the transition. Keep it small, or the edge will look blurry.
- Work at the final resolution. A selection on a small canvas cannot be scaled up cleanly later. Start with a canvas size that matches your delivery needs.
- Blend seams between merged pieces with a soft brush on a mask, or the Smudge tool at reduced opacity. Use a textured brush for painterly work so the blend does not look airbrushed.
- Sharpen color after transforms with Curves, which tends to recover contrast better than the Sharpen option.
Export Cut Shapes for After Effects
Once the shapes are cut, you need to get them out cleanly.
- PNG keeps transparency for a single flattened shape. Hide the background color layer before exporting, or the PNG will have a solid backdrop.
- PSD preserves layers, which is the better route when you want separate pieces to animate in After Effects. Layer names carry over, so name your layers before export.
- Check the canvas size. Everything exports at canvas resolution, so a small canvas limits how far you can scale in a comp.
In After Effects, import the PSD as a composition with layer sizes retained, and the pieces arrive ready to parent, rig, or animate. This is a practical way to build cutout characters, collage-style title cards, or textured shape elements. They can then be combined with vector work or 3D passes from Cinema 4D or Blender.
Where Styleframe Fits After the Cut
Procreate is good for the hand-made part: drawing, cutting, and arranging stylized shapes. Styleframe picks up when those shapes need to become moving, styled footage without losing artistic control. It is an AI video and motion tool built around reference images, video clips, and keyframes rather than one-click generation.
A few practical ways artists combine them:
- Frames-to-Video. Export two or more of your cut-and-arranged compositions as keyframes and use them as start and end frames. You define the poses or layouts, and the tool generates the motion between them.
- Restyle and Ink-and-Paint. Use a Procreate illustration as a style reference and apply that look to footage through reference-driven style transfer. Your hand-drawn shape language carries into the motion.
- Remove Background. When a cutout still has a background you could not select cleanly, a background removal pass can isolate the subject for compositing.
- 2D-to-3D and Turntable. A cut character or object can be taken from a flat image toward a 3D-style view or rotation, which is useful for look development before you commit to a full 3D build.
- 4K Upscale. If your Procreate canvas was smaller than your delivery resolution, upscaling helps bring generated output up to production-ready 4K.
Generations are iterative and non-destructive, so you can try variations without discarding earlier results. Styleframe exports image sequences, so the output drops into an existing After Effects or Nuke comp, and an After Effects plugin is on the way. Your compositing pipeline stays as it is. The AI work becomes one more controllable source of plates and elements.
Common Problems and Fixes
The cut leaves nothing behind or does nothing. You are probably on the wrong layer, or the selection is empty. Check the layer first.
The selection edges look jagged. Zoom in, use Freehand with more points, or switch to a mask and refine the edge by painting.
The shape distorts when moved. Check that you are in Uniform mode, drag from outside the shape, and set Interpolation to Bicubic.
You cut the wrong thing and cannot recover it. Undo with a two-finger tap, or work from a duplicate layer. Masks avoid the problem entirely.
The exported PNG has a white background. Hide the Background Color layer in the Layers panel before exporting.
Quick Reference
Cutting in Procreate comes down to picking the right selection mode, deciding between destructive and mask-based edits, and transforming pieces carefully. Handle those three well and the shapes carry cleanly into a motion pipeline.