How to Customize Procreate Brushes
StyleFrame Team7 min read
To customize a Procreate brush, duplicate an existing brush (swipe left, tap Duplicate), tap it to open Brush Studio, and adjust its attributes. The ones that matter most are Shape, Grain, Stroke Path (spacing, jitter, fall off), StreamLine, and Dynamics. Test each change in the Drawing Pad, then tap Done to save, or Cancel to discard the session. Working on a duplicate keeps the original intact, and a reset point lets you roll back later.
Before You Touch Anything: Protect the Original
Brush Studio edits are not undoable one step at a time, so set up a safety net first.
- Duplicate the brush. Open the brush panel, swipe left on the brush, and tap Duplicate. Customize the copy.
- Create a reset point. Open the brush, go to About This Brush, and check whether a reset point exists. Some brushes have one, but others may not. If there isn't one, create it before making changes. Later, you can return to that state with Reset.
- Understand Done vs. Cancel. Done commits everything from the session. Cancel throws away the whole session, which is the quickest way to back out of a bad run of tweaks.
- Make a dedicated brush set. Scroll to the top of the brush set list and tap the plus to create a new set. Dropping customized brushes there keeps them out of Procreate's stock packs, so they're easy to find and back up.
Open Brush Studio
There are two entry points. To edit an existing brush, tap it once to select it and tap again to open Brush Studio. To build from scratch, open the brush panel, tap the plus in the top right, and choose to create a new brush.
The interface has three parts:
- Attributes: the left-hand menu of 14 categories.
- Settings: the sliders and toggles for whichever attribute you've selected.
- Drawing Pad: a live preview area where you scribble to see changes immediately.
Every slider can also be set numerically. Tap the number beside a slider to type an exact value. Where pressure or tilt (and barrel roll on Apple Pencil Pro) apply, the same panel lets you attach them to that slider independently. This is where a brush starts feeling like yours, because you decide what hand pressure or pen angle actually does.
You don't need all 14 attributes. A handful covers most customization.
Shape: The Stamp Behind Every Stroke
Think of the Shape source as a stamp that Procreate repeats along your stroke path. Under Shape, tap Edit, then Import to pick from Procreate's Source Library or bring in your own image. A rough blotch shape, for instance, gives a brush ragged edges immediately.
Custom shape sources are where most import problems occur. A few rules save time:
- White is opaque, black is transparent. The brush engine reads the image this way.
- Avoid black art on transparent PNGs. The engine sees a blank square. Either draw the design in white, place black artwork on a white background, or save as a JPG.
- Invert with two fingers. Tapping the imported source with two fingers flips it, which fixes a shape that comes out as a negative.
- Use square images. Cropping to 1:1 keeps sources predictable.
- For stamp brushes, enable Orient to iPad Screen in the General settings and increase Spacing so individual stamps read clearly.
Scanned ink splatters, sponge stamps, and hand-painted blobs make more interesting shapes than anything in a library, because they carry irregularities that are hard to fake.
Grain: The Texture Inside the Shape
Grain is the texture applied within the shape. Shape is the crayon's profile, and grain is the paper tooth it's dragging across. Combining the two gives a huge range of results.
Photos of bark, sand, or paper, or scanned watercolor washes, all work as grain sources. Crop them to 1:1 before importing. If you don't want visible tile edges while painting, set the grain to repeat automatically. Then check how the grain behaves at different brush sizes, because textures can look very different when scaled, which leads to the next setting.
Properties: Push Past the Default Size Limits
Brush size is limited by default, and sometimes you need to exceed it. Open Properties and raise the Maximum or lower the Minimum size. Typical reasons are painting a large background texture whose grain misbehaves at scale, or making a liner brush finer than the stock minimum. Draw in the Drawing Pad as you adjust to preview.
Stroke Path: Spacing, Jitter, and Fall Off
Stroke Path controls how Procreate plots stamps along your gesture.
- Spacing: how often the shape stamps itself. High spacing shows separate stamps with gaps. Near zero, stamps merge into one continuous line.
- Spacing Jitter: randomizes the gaps. Note there is a minimum spacing, so jitter can still change placement even when base spacing is 0%.
- Jitter Lateral: shifts stamps perpendicular to the stroke direction.
- Jitter Linear: shifts stamps along the stroke, so even short strokes can extend past their start and end points.
- Fall Off: fades the stroke as it progresses, like running out of paint. Off means no fade; high values make the stroke vanish quickly.
Both jitter types can be tied to pressure and tilt, which makes scatter brushes (foliage, grit, sparks) respond to how you draw rather than behaving identically every time.
Stabilization and StreamLine: Control the Line
StreamLine smooths wobbles in your stroke and matters most for inking and calligraphy. It has two parts: Amount (higher gives smoother, more even lines; lower gives more natural, wobblier ones) and Pressure (higher gives a longer, smoother pressure response; lower makes pressure kick in sooner).
Stabilization is a separate control that averages out the stroke as you draw, and it can apply to a single brush or globally through accessibility settings. Use per-brush settings when only certain brushes need it. A technical-pen brush might get heavy smoothing, while a sketching pencil keeps the natural shake.
Dynamics, Wet Mix, and Apple Pencil
Once shape, grain, and path behave, refine how the brush feels:
- Dynamics determine how the brush responds to speed and how color shifts with Apple Pencil input.
- Wet Mix changes how the brush pushes pigment around the canvas, which is what separates a dry marker from a paint-like brush. For watercolor-style brushes, adjust dilution, flow, bleed, taper, and opacity together rather than one at a time.
- Apple Pencil settings tune how the brush reacts to the stylus itself.
A practical method is to change one attribute at a time, test in the Drawing Pad, and write down values that worked. Because there's no step-by-step undo inside the studio, small, deliberate moves beat big sweeps.
Test, Name, and Save
Draw a few strokes in the Drawing Pad, then try a new canvas and test the brush at the sizes and colors you'll actually use: thin lines, broad fills, fast scribbles, slow pressure builds. When it behaves, tap Done, name it in About This Brush, and keep it in your custom set. It's also worth exporting your custom sets as a backup, along with your palettes and artwork, so a reset or device change doesn't wipe your work.
Why Customized Brushes Matter in a Motion Pipeline
Procreate isn't a motion tool, but it can be used for the hand-made part of a project: boardframes, texture passes, painted mattes, ink or charcoal elements, and style frames. Custom brushes let you build a recognizable mark-making vocabulary once and reuse it across jobs, so a campaign's look doesn't depend on whichever default brush you grabbed that day.
The practical handoff is straightforward: export your Procreate artwork as flat images or layers and bring it into After Effects, Nuke, Blender, or Cinema 4D as textures, elements, or reference. A few habits help:
- Paint at the resolution you'll need. Grain that looks good at one canvas size can read differently when scaled in comp.
- Keep elements on separate layers, so you can treat ink, texture, and color independently in compositing.
- Save grain and shape sources you scan. They're reusable assets, and the same scans can serve as overlays in your compositing tool.
Quick Customization Checklist
- Duplicate the brush and confirm a reset point exists.
- Open Brush Studio and use the Drawing Pad for live testing.
- Set Shape and Grain sources (white = opaque; invert with two fingers if needed).
- Adjust Properties for size limits.
- Tune Stroke Path: spacing, jitter, fall off.
- Add StreamLine or Stabilization for line control.
- Link pressure and tilt to the settings that should respond.
- Refine Dynamics and Wet Mix for feel.
- Test on a real canvas, tap Done, and back up your custom set.
Customizing brushes rewards small, deliberate experiments. Change one setting, look at the result, and keep what works. Over time you'll end up with a personal toolkit that carries your style reliably from sketch to final comp.