How to Curve in Procreate
StyleFrame Team8 min read
In Procreate, "curving" means one of three things, and each has its own tool. For lines and shapes, draw a stroke, hold until it snaps, then tap Edit Shape and drag the nodes. For text, Procreate has no text-on-a-path option, so you rasterize the text and bend it with Warp (Advanced Mesh) or Liquify, or hand-letter along a guide. To curve tonal and color values, open Adjustments > Curves and drag points on the Gamma, Red, Green, or Blue channel.
Which kind of curve do you need?
The phrase covers several different jobs, and it helps to split them along these lines:
- Curved lines and shapes: arcs, swooshes, and guides for layout or lettering.
- Curved text: type that follows an arc, a badge outline, or a logo shape.
- Curves adjustment: the tone and color tool, closer to Curves in Photoshop or Lumetri than to anything geometric.
Pick the section below that matches your task. If you animate in After Effects, the last sections cover which of these jobs are better done in Procreate and which are better done in your compositing app.
How to curve a line or shape in Procreate
This is the fastest curve in Procreate and the foundation for most other methods.
- Pick a brush and draw a rough curve on a new layer.
- Keep your Apple Pencil or finger on the screen at the end of the stroke until the line snaps into a clean shape.
- Tap Edit Shape at the top of the canvas.
- Drag the nodes that appear to reshape the arc until it's symmetrical and the right size.
Edit Shape is where you fix mistakes, so don't redraw a wobbly arc. Adjust it.
Draw and hold doesn't detect every curve. Compound shapes, like an S-curve, aren't recognized, and users have requested that feature. A common workaround is to draw a clean line or circle, open Adjustments > Liquify, choose Push, and move the pixels into the shape you want. Liquify works on pixels, so you lose the editable nodes.
Use a drawing guide to keep curves symmetrical
For symmetrical arcs, turn on Actions > Canvas > Drawing Guide, then tap Edit Drawing Guide and set a grid size you can read easily. Draw your arc against the grid, snap it, and fine-tune it with Edit Shape. Switch the guide off when you're done so it doesn't distract you during the final pass.
How to curve text in Procreate
Procreate can't wrap live text around a shape. Every method either converts the text to pixels or has you draw the letters yourself. Three approaches cover most cases.
Method 1: Warp with Advanced Mesh
This is the most controllable option for standard type.
- Create the text with Actions > Add > Add Text, then set the font, weight, and kerning. Add extra letter spacing if the curve will crowd the characters.
- Put the text on one line and center it on the canvas.
- Draw a guide arc on a layer beneath it, using the snapping method above.
- Duplicate the text layer first. Warp rasterizes it, and you won't be able to edit the wording afterward.
- With the text layer selected, tap Transform, choose Warp, then tap Advanced Mesh.
- Drag the mesh points so the baseline follows your arc. Any part of the mesh can be dragged, not only the nodes.
For a symmetrical curve, keep the nodes on both sides mirrored. Work in small adjustments. Large pulls distort letter shapes, stretching the middle of the word and squeezing the ends. Fix that by nudging individual rows of mesh points rather than dragging the whole line.
Method 2: Liquify with Push
Liquify is the quickest way to get a gentle bend, but the least predictable.
- Duplicate the text layer, then select the one you'll alter.
- Tap Adjustments > Liquify and choose Push.
- Set a brush size large enough to move a good portion of the word without pulling in neighboring letters.
- Stroke in the direction you want the pixels to travel. You're pushing existing pixels, not drawing the curve.
Turning on the brush cursor in Actions > Prefs helps, because you can see the brush's footprint before you push. Liquify suits small bends and organic distortions. For a precise, even arc, Warp is better.
Method 3: Hand-letter along a curve
If you want control over each letter, draw the curve first and letter along it manually.
- Draw and snap an arc, then lower its opacity.
- Duplicate the arc and drag it upward to set an x-height. With snapping on, it moves in a straight line.
- Add vertical guides, either by lowering the drawing guide's grid size or by painting a vertical-line pattern on its own layer, to keep letter spacing even.
- Write the word off to the side so you can count the letters and find the center one. For a word with an odd letter count, put the middle letter at the arc's center point.
- Create a new top layer and letter along the guides, working outward from the center.
A second approach uses a perspective drawing guide with the vanishing point at the center of the canvas. The radiating lines act as letter guides for circular or fan-shaped layouts. Group your guide layers so you can hide them with one tap when you're done.
Hand-lettering is the slowest option, but it keeps letters crisp, because nothing is being stretched. For logos and badges that will be scaled up, it often gives the cleanest result.
Which text method should you pick?
How to use the Curves adjustment in Procreate
If you meant the Curves tool, find it under Adjustments > Curves. It's a graph with a histogram behind it, a diagonal line, and four channels: Gamma, Red, Green, and Blue.
- Gamma changes overall tonal contrast.
- Red, Green, Blue change the amount of each color independently.
- The bottom-left point represents the darkest pixels and the top-right point represents the lightest.
Drag the top-right point down to darken the brightest areas. Drag the bottom-left point up to lift the blacks. Pulling the top-right point left brightens the image and increases contrast, because darker values get pushed toward white. You can also work per channel to adjust individual colors.
You can hold your finger on the canvas to see the original while you're in the Curves interface, and release to return to the preview. Use a separate layer when you want to keep the original intact.
Common problems when curving in Procreate
- Text won't edit after warping. It's rasterized. Duplicate the text layer before you warp or liquify, and keep the original hidden.
- Letters look stretched or uneven. You've pulled too far from a single area. Use smaller mesh adjustments or increase kerning first.
- The arc isn't symmetrical. Use the drawing guide grid, and mirror node positions on both sides when editing the shape.
- The curve looks soft after scaling. Warped and liquified text is pixel-based. Work at a high canvas resolution, or hand-letter if the piece will be enlarged.
When to curve in Procreate and when to do it in After Effects
If the text needs to move, curving it in Procreate is usually the wrong choice, because the text becomes pixels. Consider building it as live text in your compositing app instead. Procreate is a good fit for hand-drawn, stylized lettering, badges, and illustrated elements where the curve is part of the artwork. Export those and bring them into After Effects, Premiere Pro, or Nuke as stills or elements to animate.
Keep layers separate before export. A curved lettering layer, its outline, and any shadow or texture should each be their own layer, so you can animate or grade them independently once they're in your compositing app.
Where Styleframe fits after Procreate
A curved lettering piece or a hand-drawn frame from Procreate is often the starting point for motion rather than the end result. Styleframe is an AI video and motion tool built for artistic control, and it works from your own references rather than a one-click black box. You can use a Procreate frame as a keyframe in Frames-to-Video, or as a reference for Restyle or Ink-and-Paint, which are reference-driven style transfer. Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try different directions without losing earlier versions.
Other tools may help with specific jobs. 2D-to-3D and Turntable can give a flat illustrated element dimension, Remove Background isolates artwork for compositing, and 4K Upscale increases output resolution. Styleframe exports image sequences, so the results go straight into an After Effects or Nuke comp. You keep your compositing workflow and use Procreate for what it does best, which is drawing.
Quick recap
- Curved line: draw, hold, then Edit Shape.
- Curved text: duplicate the layer, then use Warp with Advanced Mesh for precision, Liquify Push for subtle bends, or hand-letter along a guide.
- Curves adjustment: Adjustments > Curves, with Gamma and RGB channels for tone and color.
- For animation: keep layers separate, export cleanly, and animate live text in your compositing app when you need it to move along a path.