How to Create Watercolor Effect in Procreate
StyleFrame Team8 min read
The watercolor effect in Procreate comes from three things working together: a textured paper background, transparent brushes that build up in layers, and a blending tool that pulls pigment into soft edges and blooms. Start with a high-resolution canvas, set a cold-press paper texture to Multiply, paint light washes in a few passes without lifting your Apple Pencil mid-wash, and use a smudge or blend brush to simulate water running into pigment. Procreate approximates watercolor with brush behavior rather than a true wet-media simulation, so the realism depends on your brushes, your paper grain, and your layer discipline.
What Procreate Can and Can't Do with Watercolor
Procreate's brush engine imitates how watercolor looks, not how it behaves. It does not simulate paper moisture, pigment drying over time, or edges that migrate as a wash dries. Some Procreate users point to other apps such as Rebelle and Expresii as the benchmark for wet-on-wet realism.
That doesn't make Procreate a poor choice. Artists get convincing results by faking the cues viewers read as "watercolor":
- Transparent, layered washes where overlaps get darker
- Visible paper tooth showing through the pigment
- Darker pooled edges and soft blooms
- Irregular splatters, runs, and unpainted white gaps
If you plan these cues deliberately, the lack of a real simulation matters much less.
Step 1: Set Up the Canvas and Paper
Start with a canvas of at least letter size at 300 DPI. Watercolor texture depends heavily on grain, and a low-resolution canvas turns paper tooth into mush. If the painting will end up in a video timeline, work at or above your target frame size, such as 3840 × 2160 for UHD, and keep in mind that texture scale will change when you resize.
Next, add the paper:
- Import a scanned or generated watercolor paper texture (cold press gives a pronounced grain, hot press is smoother).
- Place it on its own layer at the top of the stack.
- Set that layer's blend mode to Multiply so the paper grain darkens your colors instead of covering them.
- Alternatively, keep the paper at the bottom as a background and use the brush's grain settings for texture.
Many artists find the paper choice changes the result more than the brush does. Test two or three textures on the same wash before committing.
Step 2: Choose or Build the Right Brushes
You have two options: buy or download a watercolor brush set, or tune your own in Brush Studio.
If you build your own, these settings matter most:
- Grain: Use a paper-like texture source. Texturized grain stays fixed to the canvas like real paper, while moving grain looks more like a stamp.
- Opacity and flow dynamics: Map pressure to opacity so light strokes stay transparent and heavier pressure builds pigment.
- Wet Mix: Adjust Dilution, Charge, Attack, and Pull to control how much the brush picks up and drags existing color. Low-charge, high-dilution settings feel closer to a watery wash.
- Shape: A slightly rough, uneven edge reads as more natural than a perfectly soft circle.
Keep at least two types in your toolkit: a transparent wash brush that layers like real glazing, and a more opaque "loaded" brush for details and accents, which behaves like concentrated pigment or gouache. Transparent strokes for base color and opaque strokes for finishing is a common and effective split.
Step 3: Lay Down Washes in Layers
Sketch loosely on a separate layer, then reduce its opacity or set it to Multiply. Paint your washes on a layer beneath the sketch.
Some habits that make digital washes look believable:
- Paint light to dark. Watercolor is built up, so start with pale tints and add deeper values over them.
- Don't lift mid-wash. Every time you lift the pencil and start a new stroke, transparent brushes show an overlap seam. If you want a smooth area, fill it in one continuous motion. If you want visible overlaps, lift deliberately.
- Let overlaps happen. Where two transparent strokes cross, the darker intersection is part of the look. Don't blend everything into a flat fill.
- Leave paper white. Skip highlights instead of painting them over later. Unpainted gaps look more authentic than white added on top.
Control with clipping masks
If you want clean shapes without erasing, fill the shape with a flat color on its own layer, then add a new layer above it and turn on Clipping Mask. Anything you paint on the clipped layer stays inside the shape, which lets you paint freely and loosely without going over the lines. Use separate layers for separate objects to keep adjustments easy later.
Step 4: Blend and Add "Water"
This is the step that sells the effect. Instead of using a hard eraser or standard airbrush, use the Smudge tool with a textured or watercolor-style brush to drag pigment outward from darker areas.
- Smudge from dense pigment into lighter areas to create soft bleeds and runs.
- Use a lighter smudge pressure for gentle blooms and a heavier one for dramatic drips.
- Smudge with a grainy brush, not a smooth airbrush, so the blended areas keep paper texture.
- Work on the same layer as the paint you want to blend, since smudging only affects the active layer.
For shading, create a new clipped layer above the base color, set it to Multiply, and paint with the same hue or a slightly more saturated version. This keeps shadows transparent and consistent with the base wash.
Step 5: Add Edge Darkening, Splatter, and Texture
A few finishing touches give the painting its physical feel:
- Edge pooling: On a clipped layer, trace the outer edge of a wash with a slightly darker tone and soften it with a smudge. Real pigment tends to settle at the edge as a wash dries.
- Splatters and drips: Use dedicated splatter brushes on a separate layer. Keeping them separate lets you move or remove them without damaging the main painting.
- Granulation: Overlay a subtle grain layer set to Multiply or Overlay at low opacity.
- Color variation: Nudge hue, saturation, and brightness slightly across large washes so they don't read as flat digital fills.
Keep your layers organized and named. If you plan to animate the artwork, this structure pays off immediately.
Common Mistakes to Avoid
- Painting with opaque brushes everywhere, which produces a gouache or digital-painting look
- Over-blending until all edges are soft and the texture disappears
- Using a paper texture that is too small or too uniform, which makes the grain look like a filter
- Working at a low resolution and scaling up afterward
- Flattening too early and losing the ability to adjust washes
Taking Procreate Watercolor into Motion
For motion designers and compositors, a watercolor illustration is often a starting asset rather than a final piece. Here is a practical way to move it into a video pipeline.
Export with layers intact
Export as a layered PSD so washes, splatters, line work, and paper stay separate. In After Effects, import as a composition with layers preserved. You can then animate elements individually, such as washes revealing over time, splatters popping in, or line work offset slightly from the color to mimic loose registration.
Add motion that suits the medium
Static watercolor looks great, but most animated watercolor needs a handmade rhythm. A subtle Turbulent Displace on line work, a stepped "boil" effect, and a fixed paper texture that doesn't move with the artwork all help the piece feel hand-painted rather than composited. Keep the paper layer locked to the frame so grain stays steady while the paint moves, a detail that echoes how real paper sits behind moving pigment.
Extending the look to footage or 3D
Hand-painting every frame isn't realistic for most productions. This is where Styleframe may fit. It is an AI video and motion tool, and you can use your own reference images, such as your finished Procreate watercolor, to guide the look rather than relying on a text prompt alone. Check Styleframe's current documentation for its specific features and output options.
A few practical points about working this way:
- Reference-driven control: Your own painted frames can help define the palette, edge quality, and brush character.
- Pipeline fit: Output can be brought into your compositing tools, where you can add your paper texture, grain, color correction, and final compositing.
Styleframe doesn't replace painting in Procreate. Think of it as a way to carry a hand-made look from a few key illustrations into moving footage, while you keep final compositing in your existing tools.
Quick Workflow Checklist
- Create a 300 DPI canvas at your final delivery size or larger.
- Add a paper texture set to Multiply.
- Choose transparent wash brushes plus an opaque detail brush.
- Sketch lightly and paint light-to-dark washes without lifting mid-stroke.
- Use clipping masks to hold shapes, and Multiply layers for shading.
- Smudge with a grainy brush to create bleeds and runs.
- Add edge pooling, splatters, and subtle granulation.
- Export a layered PSD for animation, or reference frames for style transfer.
Final Thoughts
A convincing watercolor effect in Procreate comes down to fundamentals: good paper texture, transparent layering, thoughtful blending, and restraint. The software won't simulate drying paper, but a careful workflow gets you close enough that viewers read the result as real paint. From there, you can animate the layers in After Effects, or use a reference-driven tool like Styleframe to extend the same painted look across moving images, keeping the artistic decisions in your hands.