How to Create Procreate Bruches
StyleFrame Team7 min read
To create a Procreate brush, tap the Brush icon, tap the plus (+) to open Brush Studio, then define a Shape (the stamp) and a Grain (the texture). Tune Stroke Path settings like spacing and jitter, test on the drawing pad, and tap Done to save the brush. For a faster start, swipe left on any existing brush, choose Duplicate, and edit the copy so the original stays intact.
What You Need Before You Start
Procreate runs on iPad, and an Apple Pencil makes pressure and tilt settings far more useful. The only other things you need are source artwork and a bit of patience with Brush Studio, which has far more settings than you'll use on a typical brush.
The core idea is simple: Shape + Grain = brush stroke. Shape is the stamp that gets repeated along your stroke, such as a circle, a blotch, or a leaf. Grain is the texture visible inside that stamp, such as paper tooth, charcoal, or sponge. Nearly every custom brush is a variation on those two inputs.
Step 1: Organize a Brush Set
Before you build anything, keep your work out of Procreate's default packs.
- Open the Brush Library.
- Scroll to the top of the set list and tap the plus to create a new brush set.
- Name it something specific, like "Grit Textures" or "Ink Tools."
Tapping the plus inside that set creates a new blank brush there. You can also drag brushes between sets by pressing and holding them. A tidy set matters more than it sounds, because brush collections multiply quickly once you start experimenting.
Step 2: Start From Scratch or Duplicate
You have two routes into Brush Studio:
- From scratch: Tap the plus inside your set. You get a default round brush with neutral settings.
- From an existing brush: Swipe left on a brush, tap Duplicate, then tap the copy to open it. This is the better route when you want something close to a pen, pencil, or paint brush and only need to alter its behavior.
Duplicating is also the safest habit. If you break a settings combination you liked, the original is still there.
Step 3: Define the Shape
In Brush Studio, open Shape and tap Edit next to Shape Source. On smaller screens the Edit button may be missing, in which case tapping the shape preview works.
You can pull a shape from three places:
- Source Library: Procreate ships with more than 150 shapes, from clean geometry to rough blotches. Tap Import, choose Source Library, pick one, and tap Done.
- Your own artwork: Draw or paint a shape in Procreate, then import it.
- Scanned or photographed material: Ink splatters, sponge stamps, and stamped marks give shapes that are hard to fake digitally.
Prepare custom shape art correctly
Most "my brush is blank" problems come from file prep. A few rules fix almost all of them:
- Use a square canvas. A non-square source gets distorted. A 2048 × 2048 px canvas works, and some artists work larger (for example 10 × 10 inches at 300 dpi) to avoid softness at big brush sizes.
- Think in white and black. The brush engine reads white as opaque and black as transparent. Gray gives you a semi-transparent result.
- Watch your file format. A black design on a transparent PNG gets read as an empty square, because black means transparent. Either draw in white, place black art on a solid white background, or save as a JPG.
- Invert when needed. Tapping the imported source with two fingers flips it, so a black-on-white drawing becomes a usable white-on-black stamp.
- Keep it high contrast. If you want a crisp, fully opaque stamp, stick to pure black and white.
Step 4: Add a Grain
Open Grain and tap Edit next to Grain Source. Like shapes, grains have a Source Library, but custom grains are what give a brush its identity.
Good grain material includes:
- Watercolor washes or ink on cold-press paper, scanned flat
- Photos of tree bark, sand, concrete, plaster, or garden soil
- Crumpled paper or photocopied noise
Crop the image to a 1:1 ratio before importing. Then turn on Auto repeat so the texture tiles into itself instead of showing visible edges as you paint. If you want the texture to behave like a stamp that's applied as-is each time, leave tiling off and use the brush with taps rather than long strokes.
Step 5: Shape the Stroke With Stroke Path
Stroke Path is where a brush gets its rhythm. Three controls do most of the work:
- Spacing: Distance between stamps. Low values blend them into a smooth line. High values reveal individual stamps, which is what you want for dotted lines, chains, and scatter effects.
- Jitter: Randomizes the stamp position. Raise it to scatter leaves, sparks, or grit around the stroke.
- Falloff: Makes the stroke fade or taper out as if the brush runs out of paint.
For a clean stamp brush, raise spacing until stamps no longer overlap, and switch on Orient to Screen in the General settings so the stamp stays upright regardless of stroke direction.
Step 6: Layer in Dynamics and Behavior
Once shape, grain, and path feel right, add responsiveness:
- Pressure and tilt: Adjust how the brush responds to Apple Pencil input so strokes feel natural.
- Taper: Shape the start and end of strokes for ink and calligraphy styles.
- StreamLine: Smooths wobble for long clean lines.
- Color Dynamics: Try Color Pressure and increase the Hue slider. Hue shifts as you press harder, which is a quick way to build expressive brushes.
- Wet mixing settings: For watercolor-style brushes, adjust dilution, flow, opacity, and bleed.
- Properties: Set maximum and minimum size limits if the default range isn't enough.
Resist adjusting everything at once. Change one setting, paint a few strokes on the drawing pad, and then move on. Brush Studio previews your changes live, so you can see the effect immediately.
Step 7: Test, Name, and Save
Tap Done to return to the canvas and paint on a fresh layer. Test at several sizes, a few colors, and light versus heavy pressure. A brush that looks good at one size can fall apart at another, especially if the shape or grain source was low resolution.
Open About this brush to rename it. You can also add your name or signature there. To share it, swipe left on the brush and tap Share. This produces a file other Procreate users can import.
Brush Types Worth Building First
If you're unsure where to begin, these four cover most needs:
- Texture brush: Scanned ink or paint as Grain, with a basic round shape.
- Stamp brush: A custom drawn shape, high spacing, Orient to Screen enabled.
- Scatter brush: A leaf, speck, or spark shape with raised spacing and jitter.
- Ink brush: A round shape with taper, pressure-linked size, and some StreamLine.
Why Motion Artists Build Custom Brushes
For After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke users, Procreate brushes are mostly a way to generate hand-made assets quickly: texture overlays, grunge mattes, ink edges, cel-style linework, and painted style frames. You can paint on transparent layers, export the results, and drop them into a comp as overlays, displacement sources, or track mattes.
Some practical habits help here:
- Paint textures on a large square canvas so they hold up when scaled in a 4K comp.
- Keep brush output on separate layers so you can toggle, blend, or time-offset them later.
- Build several variations of the same texture. Cycling between them in a comp avoids the obvious repetition of a single static grain.
Common Problems and Quick Fixes
- Brush paints nothing: Check for black art on a transparent PNG. Switch to white art, a white background, or a JPG.
- Brush looks inverted: Tap the source with two fingers to invert it.
- Stamp looks stretched: Your source wasn't square.
- Texture shows visible tile edges: Enable Auto repeat or use a seamless texture.
- Brush looks blurry at large sizes: Rebuild the source at a higher resolution.
- Stamps rotate oddly: Turn on Orient to Screen.
- Strokes look too faint: Make the source pure black and white rather than gray, then raise opacity or flow.
A Simple Workflow to Repeat
- Create a new brush set.
- Duplicate a brush close to your goal, or start a blank one.
- Import a Shape from the Source Library or your own square artwork.
- Add a Grain, crop it to 1:1, and enable Auto repeat if you need seamless texture.
- Adjust Spacing, Jitter, and Falloff.
- Add pressure, taper, and StreamLine.
- Test on a fresh canvas, rename, and save.
Once you've done this a few times, building a new brush takes minutes, and a personal brush set becomes a reusable source of visual identity that carries straight into your motion work.