How to Create Oil Brushes in Procreate
StyleFrame Team9 min read
To create an oil brush in Procreate, duplicate a built-in oil brush, open Brush Studio, and adjust four things: the Stroke Path for bristle spacing, the Grain for canvas and paint texture, Wet Mix for color smearing, and Color Dynamics for natural variation. Test it on a blank canvas, tune it until strokes pick up and smear underlying color the way real paint does, and save it as its own brush or export it as a .brush file. Starting from a duplicate rather than a blank brush gives you a working baseline to refine.
What Makes a Brush Feel Like Oil
Before touching any sliders, it helps to know what you are reproducing. Oil paint reads as oil because of a few behaviors:
- Colors blend on contact. Painting over wet paint drags and mixes the colors beneath instead of stacking transparent layers like acrylic or watercolor.
- Bristle marks stay visible. Stroke edges show streaks and ridges from the brush hairs.
- Paint has body. Thick strokes catch light on ridges, and thin glazes let underlayers show through.
- Pressure changes the load. Pressing harder lays down more paint, while a light touch skims across the surface and breaks up on the texture.
Each of these maps to a group of settings in Brush Studio. If a brush feels flat, one of these four behaviors is usually missing.
Step 1: Start from a Duplicate
Open the brush library and find an oil-style brush in the Oils set. Names and sets shift slightly between Procreate versions, so use whichever one is closest to what you want. Swipe left on the brush and tap Duplicate. Editing the copy keeps the original untouched, so you always have a reference to compare against.
Tap the duplicate to open Brush Studio. The left column lists the setting groups, and the right panel shows the controls and a live drawing pad where you can test strokes as you adjust.
You can also tap the + at the top of the library to build a new brush from scratch. That works, but it takes longer to reach a convincing result because you have to define the shape and grain sources yourself.
Step 2: Shape the Stroke Path
Stroke Path controls how the brush tip is stamped along your line. For oils:
- Spacing: Keep it low enough that the stamps merge into a continuous stroke. High spacing produces visible dotted repeats, which looks digital.
- Jitter: A small amount of jitter adds irregularity to the edges, which breaks up the mechanical feel.
- Streamline and stabilization: Higher values smooth wobbly lines, which suits long blending strokes. Lower values keep expressive, loose marks.
If you need a round brush with a slight edge texture, small adjustments here do more than large ones. Make one change at a time and draw a few test strokes after each.
Step 3: Define the Shape (the Bristle Pattern)
The Shape panel decides what each stamp looks like. Real bristle brushes leave streaks, so the shape source matters.
- Pick a shape from the Source Library that has streaky, uneven edges, or import your own as a high-contrast black-and-white image. White areas deposit paint and black areas do not.
- Use Rotation and Randomized to vary the angle of each stamp, so repeated stamps don't line up into obvious patterns.
- For a flat brush, narrow the shape and tie its rotation to the stroke direction so the bristles trail behind the Apple Pencil. This is the setting that makes strokes feel like they follow your hand.
Making your own shape is easy. Draw or photograph a streaky mark, convert it to black and white, increase the contrast, and import it as the shape source.
Step 4: Add Grain for Paint and Canvas Texture
Grain is where surface texture comes from. A grain that resembles canvas weave or dry-brush skipping makes the biggest single difference to realism.
- Choose a texture from the Source Library or import your own. Photographing a scrap of canvas, rough paper, or a real paint smear under flat light works well. Convert it to grayscale and boost contrast before importing.
- Set Movement to Textured if you want the grain to stay fixed to the canvas, like paint catching on a weave. Set it to Rolling if you want it to travel with the brush, like texture carried on the bristles.
- Adjust Scale, Depth, and Contrast until the texture shows in thin strokes but doesn't overwhelm thick ones.
Many artists find a fixed (textured) grain at moderate depth reads more like real canvas, while a rolling grain reads more like bristle marks.
Step 5: Tune Wet Mix and Rendering
This is the panel that makes an oil brush behave like oil rather than a textured marker. Wet Mix controls how the brush interacts with paint already on the layer.
- Dilution: Higher values thin the paint and let more of the underlying color blend through.
- Charge: Controls how much paint the brush carries. A higher charge lays down more of the selected color before it begins picking up the existing color.
- Attack: Affects how quickly the brush starts mixing with the paint beneath.
- Pull: Determines how far the brush drags underlying color along the stroke.
- Blur: Softens the transitions inside the stroke, which is useful for blending brushes.
Experiment by painting two blocks of different colors and dragging the brush across the boundary. If the colors smear into a believable gradient with a bit of streaking, the settings are close. If they simply overlap, increase pull and lower the charge.
The Rendering settings add to this. Glaze-style rendering modes give a buildup effect for layered strokes, while wet edge options create darker, defined edges that suggest paint pooling at the stroke boundary.
Step 6: Add Color Variation
Real oil strokes are never a single flat color. Color Dynamics lets each stamp or stroke shift slightly in hue, saturation, or brightness.
- Keep jitter values low, such as a few percent. Too much looks like a rainbow brush.
- Stroke-level variation tends to look more natural than stamp-level variation, since a real stroke has an overall tint shift rather than noise on every bristle mark.
- A secondary color blend can mimic the way a brush loaded with two colors produces streaky transitions.
Step 7: Set Apple Pencil Response
Under the Apple Pencil settings, map pressure and tilt to what you want:
- Pressure → size and opacity gives natural thick-to-thin strokes and lighter dry-brush touches.
- Pressure → bleed or flow (where available) affects how heavily paint is deposited.
- Tilt → shading behavior lets you lay the pencil on its side for broad, flat strokes, much like turning a flat brush on its edge.
Then set Properties, the minimum and maximum size and opacity, so the brush doesn't disappear at light pressure or become uncontrollable at the maximum.
Step 8: Test, Name, and Save
Open the drawing pad and run through a standard test:
- A single quick stroke at light pressure.
- A slow, heavy stroke.
- A stroke over an existing color.
- A long curved stroke with tilt.
- A blend between two colors.
If one test fails, return to the relevant panel instead of changing everything at once. When the brush behaves, tap About this brush to rename it, set a signature if you like, and give it a clear name such as "Dry Bristle" or "Wet Blender." To share or back up a brush, swipe left on it in the library and choose Share, which exports a .brush file. Import brushes via the + button and the Import option.
Consider building a small set instead of one do-everything brush: a dry textured brush, a wet blending brush, a flat block-in brush, and a soft glazing brush. A short set that you know well is more useful than dozens of near-duplicates.
Common Problems and Fixes
- Strokes look dotted: Reduce spacing.
- Texture looks like a repeating pattern: Increase shape randomization and rotation, or use a larger grain scale.
- Colors don't blend: Raise pull and dilution, and lower charge.
- Everything looks muddy: Reduce blur and dilution; mud often comes from overblending.
- Brush feels laggy: Very large shape or grain files and high-resolution canvases can slow performance. Use appropriately sized source images and test at your working canvas size.
Taking Procreate Oil Textures into a Motion Pipeline
For motion designers, animators, and VFX artists, oil brushes are often a source of assets rather than the final product. Hand-painted textures, brush-stroke mattes, and painted backgrounds can all be built in Procreate, then exported as PNGs or PSDs and brought into After Effects, Nuke, Cinema 4D, or Blender for animation and compositing. A few habits make this smoother:
- Paint on separate layers for elements you plan to animate, and use transparent backgrounds.
- Work at the final delivery resolution or higher, since upscaling painted texture can soften brush detail.
- Keep a consistent color profile between Procreate and your compositing project to avoid shifts.
When the goal is a painterly look across moving footage instead of single stills, hand-painting every frame is rarely practical. This is where can sit beside your Procreate work. You can use your own oil-painted frames as reference images for Restyle or Ink-and-Paint, which are reference-driven style transfer, so the look you built by hand guides the treatment of video clips. For shots where you want to control the motion between painted poses, keyframe-driven Frames-to-Video lets you supply the start and end frames yourself. Generations are driven by your references and keyframes. Your compositing workflow stays where it is.
Quick Reference Checklist
- Duplicate a built-in oil brush.
- Lower spacing and add slight jitter in Stroke Path.
- Use a streaky shape with randomized rotation.
- Add a canvas or paint-smear grain; choose textured or rolling movement.
- Raise pull and dilution in Wet Mix for blending behavior.
- Add subtle color jitter.
- Map Apple Pencil pressure and tilt to size, opacity, and flow.
- Test on a blank canvas, then name and export the brush.
Once the basic workflow is familiar, building new oil brushes becomes a matter of adjusting a few variables to match the specific look a project needs.