How to Create Calligraphy Brush in Procreate
StyleFrame Team8 min read
To create a calligraphy brush in Procreate, open the Brush Studio with the plus icon in the brush panel, then set a shape source (an oval for brush-pen looks, or a custom white-on-black PNG for a flat nib) and a blank grain. Next, raise Streamline and Stabilization for smooth curves, set Apple Pencil pressure to control size, and set a minimum and maximum size so strokes swing between thin hairlines and thick downstrokes. Duplicating a stock brush and editing the copy is the fastest route. Building from a custom shape gives you control over nib angle and edge.
How Procreate brushes work
Every Procreate brush combines two inputs: a shape, which is the stamp repeated along your stroke, and a grain, which is the texture inside that stroke. Calligraphy brushes rely almost entirely on shape and dynamics. You will usually leave the grain blank so the ink lays down as a solid, clean fill.
The rest of the behavior comes from the Brush Studio tabs: Stroke Path, Stabilization, Taper, Shape, Apple Pencil, and Properties. You don't need to touch every slider. A handful of settings decide whether a brush feels like a brush pen, a pointed nib, or a broad-edge pen.
Calligraphy is also an umbrella term. A brush that works for expressive modern script will fail at blackletter, which needs a fixed-angle flat edge. Decide which style you're building before you start.
Option 1: Convert a stock brush (fastest)
This is the quickest way to get a working modern calligraphy brush, and it's non-destructive to the original.
- Open the brush panel and swipe left on a stock brush such as a round brush, monoline pen, or watercolor brush. Tap Duplicate. Avoid stamp-style brushes, which won't convert well.
- Open the duplicate to enter the Brush Studio. The drawing pad on the right lets you test changes live.
- Stabilization: increase Streamline to roughly 80 to 90 percent, and add Stabilization around 40 to 50 percent. This smooths shaky curves, which matters most for long flowing strokes. Push too far and the line lags behind your pencil, so tune it to your hand speed.
- Apple Pencil: raise the Pressure → Size slider to the maximum. This is what ties stroke thickness to how hard you press.
- Properties: set Maximum Size well above Minimum Size. The gap between them defines the contrast between hairline upstrokes and heavy downstrokes. Start with a wide gap and adjust once you're lettering.
- Rename the brush and tap Done.
Test it with the classic drill: light pressure on upstrokes, heavy pressure on downstrokes. If the thick/thin transition feels abrupt, adjust the pressure curve in Procreate's preferences so the response matches your hand.
Option 2: Build a modern brush-pen from scratch
Building from scratch gives you a cleaner, more predictable result because you aren't inheriting hidden settings from another brush.
- In the brush panel, tap + to create a new brush. It lands in whichever set you currently have open, so open the right set first.
- Name it something you'll recognize.
- Shape Source: choose the Pro Library and select Oval. Circles suit monoline brushes, while an oval gives you a slightly more organic tip.
- Grain Source: choose the Blank option so there's no texture.
- Stroke Path: keep spacing low enough that the stamps merge into a continuous line rather than visible dots. Add Streamline here too.
- Taper: add some pressure taper and touch taper so strokes start and end with a natural point instead of a blunt cut. Check the result on the drawing pad.
- Apple Pencil: pressure controls size. Consider also adding tilt response if you like shading with the side of the pencil, though many letterers prefer to keep it off for consistency.
- Properties: set your min/max size range.
Save, then write a few words and look at the transitions. Thick-to-thin should feel gradual. If strokes look beaded, reduce spacing. If they look flat and lifeless, widen the size range.
Option 3: Build a flat-edge brush for blackletter and italic
Broad-edge scripts depend on a pen held at a fixed angle, which a round tip cannot imitate. The trick is a custom shape.
Create the nib shape
- In a vector app such as Illustrator or Affinity, make a 1024 × 1024 px square with a black background.
- Draw a thick white straight line or narrow rectangle through the center at your target nib angle. Roughly 35 degrees works for Fraktur-style lettering, and 30 and 40 degrees are common alternatives. Keep the line thick enough to read as a nib edge, and make sure it doesn't touch the canvas borders.
- Export as PNG.
Procreate reads shape sources by brightness. White paints fully opaque, black is fully transparent, and gray values are semi-opaque. If your brush paints the inverse of what you expected, use Invert Shape or double-tap the shape slot with two fingers.
Configure the brush
- Create a new brush and import your PNG as the Shape Source. Use the blank square for grain.
- In Stroke Path, drag Spacing all the way to the left so the stamps fuse into a smooth, solid stroke. This is the most common reason flat brushes look like a string of beads.
- In Shape, set Rotation and Azimuth deliberately. Azimuth makes the shape follow the direction of the pencil's tilt, which is the opposite of what you want for a fixed-angle nib, so keep it off. Remove scatter and randomization.
- In Apple Pencil, reduce or disable pressure-to-size. A real flat nib varies width by stroke direction, not by pressure.
- Keep the shape at full opacity so the ink reads as solid black.
If you need several angles (for example 30 and 40 degrees), duplicate the brush and swap the shape file. Keep them in a dedicated brush set.
Option 4: Copperplate and pointed-pen behavior
Copperplate relies on strong contrast between hairlines and shades. Start from the modern brush-pen recipe, then:
- Make the minimum size very small and the maximum size generous.
- Steepen the pressure response so you need real pressure to swell the line. You can tweak the system-wide pressure curve if the pencil feels too sensitive.
- Increase stabilization a bit more than you would for casual script. Copperplate rewards slow, deliberate strokes.
- Slightly reduce brush softness. A crisp edge helps the hairlines hold up when exported at large sizes.
Work on a large canvas, then zoom out to judge letterforms. At small sizes thick/thin contrast hides inconsistencies that show up in 4K deliverables.
Test and refine before you use it
Make a short test sheet: ascending and descending strokes, ovals, loops, a few words, and a long flourish. Look for:
- Beading or gaps: lower spacing.
- Lag or wobble: adjust Streamline and Stabilization.
- Weak contrast: widen the min/max gap or raise pressure sensitivity.
- Abrupt ends: adjust taper.
Duplicate the brush before each major change so you can compare versions. Export the finished set to share with a team or move it between devices.
Using Procreate calligraphy in a motion pipeline
If you're a motion designer, the brush is only half the job. The other half is getting lettering into After Effects, Premiere Pro, Blender, or Nuke without losing quality.
- Work large and keep layers. Create the canvas at final delivery resolution or higher, put each word or flourish on its own layer, and export as a layered PSD or as transparent PNGs. Procreate's raster output is resolution-bound, so scaling up in comp will soften edges.
- Plan the write-on. Raster strokes can't be revealed with Trim Paths. Options include exporting Procreate's time-lapse, using Animation Assist to draw stroke states as frames, or tracing the letters as vectors in Illustrator for path-based reveals in After Effects.
- Mind the color space. Lettering exported as black on transparent is easy to recolor with fill effects in comp.
Common mistakes
- Dark or gray shape files. Anything not pure white reduces opacity and makes the nib look washed out.
- Leaving spacing high. This breaks solid strokes into dots.
- Using pressure on a flat-edge brush. It undermines the fixed-angle look.
- Editing the original stock brush. Always duplicate first.
- Skipping practice. Even a perfect brush needs controlled pressure to produce good thick/thin contrast.
Final checklist
- Pick the style first: modern, copperplate, or flat-edge.
- Duplicate a stock brush for speed, or build from scratch for control.
- Use Oval shape and Blank grain for rounded brushes, and a white-on-black 1024 px PNG for flat nibs.
- Set Streamline and Stabilization, pressure-to-size, and a clear min/max size gap.
- Test on a sheet of strokes, refine, and save variants.
- Export at high resolution with transparency so the lettering holds up in your compositing pipeline.
Once the brush feels right, you can build a small library of three or four variants and reuse them across projects.