How to Create Blue X Ray Images in Procreate
StyleFrame Team8 min read
To create blue X-ray images in Procreate, desaturate a high-contrast photo, invert it so dense areas glow and empty areas go dark, then use Curves to crush the shadows. Colorize it with a Gradient Map or a blue layer set to a Screen-type blend mode, and add a blurred duplicate for glow. Hand-painted bone or structure details on a separate layer, plus grain and scan lines, finish the look. For motion work, export a layered PSD or PNG and finish the glow and animation in After Effects.
What Makes an Image Read as "Blue X-Ray"
Before you touch Procreate, know what you're building. A convincing X-ray look comes from four things:
- Inverted luminance: Dense areas are bright and empty space is near black.
- A narrow color range: Navy in the shadows, cyan or ice blue in the midtones, and near-white in the hottest highlights.
- Translucency: You see through the subject, so internal structure matters as much as the outline.
- Imperfect capture: Soft glow, grain, and slight banding sell it as a scan rather than a filter.
Most weak results fail on the third point. A simple blue negative of a photo looks like a negative, not an X-ray. The steps below spend most of their effort on translucency and structure.
Step 1: Choose and Import the Source Image
Pick a source with clear form and strong value separation. Hands, skulls, animals, sneakers, and mechanical objects work well. A subject photographed against a plain background is easiest because you can isolate it cleanly.
- Create a canvas at the resolution you need. If this will end up in a 4K timeline, build it at 3840×2160 or larger. Procreate limits the number of layers as canvas size grows, so plan your layer count.
- Tap Actions → Add → Insert a photo (or Insert a file) and place the image.
- Duplicate the layer and hide the original so you always have an untouched reference.
If the background is busy, cut the subject out first with the Selection tool, or remove the background before importing. A clean silhouette against black gives you far more control later.
Step 2: Desaturate and Invert
- Select the duplicate and open Adjustments → Hue, Saturation, Brightness. Pull Saturation to zero.
- Tap the layer and choose Invert. Light areas turn dark and dark areas turn light.
Look at the result. On a subject shot against a bright background, the background is now black, which is what you want. If your subject was dark on a dark background, skip inversion or invert only the subject. The goal is bright density inside the subject and dark empty space around it.
Step 3: Shape the Tones with Curves
Open Adjustments → Curves on the inverted layer, using the Luminance channel first.
- Pull the lower left of the curve down so the background and thin areas drop to true black.
- Lift the upper right so the densest areas approach white without clipping completely.
- Add a gentle S-curve in the middle for separation between mid-density regions.
X-rays have a lot of mid-range information and a few very bright spots. If everything is bright, the image looks flat. Keep a wide range of dark and mid grays so the blue has something to work with.
Step 4: Colorize in Blue
You have three reliable options. Pick one, or combine them.
Gradient Map (most controlled)
Use Adjustments → Gradient Map and build a gradient with three or four stops:
- Shadows: near-black navy
- Lower midtones: deep blue
- Upper midtones: cyan
- Highlights: pale ice blue, close to white
This maps brightness directly to color and gives the most consistent X-ray palette. Keep the highlight stop slightly cool rather than pure white so the image doesn't look like a grayscale photo with a blue tint.
Color Balance
Open Adjustments → Color Balance and push shadows and midtones toward blue and cyan. This is quicker but less precise. Check each tonal range separately so the highlights don't turn muddy.
Blue Layer with a Blend Mode
Create a new layer above the gray image, fill it with a saturated blue, and clip it to the image layer. Try Color, Multiply, or Screen. This is non-destructive in the sense that you can change the blue later by editing the fill. Gradient Map is easier to refine, but this approach lets you paint variation into the color by hand.
Step 5: Build the Glow
A blue X-ray without bloom looks like a duotone. Add light:
- Duplicate the colorized layer and open Adjustments → Gaussian Blur. Blur by a moderate amount so the shapes soften without disappearing.
- Set the blurred layer's blend mode to Screen or Add and lower the opacity until the glow supports the sharp layer rather than burying it.
- Optionally run Adjustments → Bloom on a merged copy for a stronger halo around the brightest areas.
For a more layered look, use two blurred copies: a tight blur for edge glow and a wide blur for atmosphere. Keep glow subtle. If you can't read the internal detail anymore, lower it.
Step 6: Create Translucency and Internal Structure
This step separates a believable X-ray from a filtered photo.
Reveal the inner structure
Create a new layer, set it to Add or Screen, and paint internal forms with a soft blue or cyan brush. For a hand, that means bone shapes. For a sneaker, it means the sole structure, stitching lines, and any internal parts. Reduce your photo layer's opacity and lower the reference to roughly half so you can trace accurately. Procreate has no automatic tracing, so this is manual work. A hard round brush for outlines plus a soft airbrush for volume works well.
Keep the strokes slightly irregular. Perfect vector-clean shapes undermine the scan feel.
Make the outer form see-through
Add a layer mask to the colorized photo and paint with a large soft brush to knock back the outer soft tissue or shell. Keep a faint outline so the silhouette reads, but let the interior glow stronger than the exterior. Masks are reversible, so you can adjust this later without damaging pixels.
Add density variation
Paint a few brighter patches where objects overlap or where material is thicker. Use a low-opacity airbrush on an Add layer. Overlap areas read as brighter because more material is stacked there.
Step 7: Add Scan Texture
Finish with imperfections:
- Noise: Merge a copy of your artwork, run Adjustments → Noise, and set the blend mode to Overlay or Soft Light at low opacity. This also helps hide banding in smooth gradients.
- Halftone or scan lines: Use Adjustments → Halftone on a duplicate, or paint horizontal lines with a texture brush, and set the result to Soft Light at a low opacity.
- Chromatic Aberration: A small amount at the edges suggests a monitor or imaging artifact. Overdone, it looks like a glitch effect, so keep it light.
- Vignette: Darken the corners with a large soft brush on a Multiply layer.
Step 8: Export for the Next Stage
How you export depends on what happens next.
- Layered PSD: Use Actions → Share → PSD if you want to keep glow, structure, and texture on separate layers for adjustment in After Effects or Photoshop.
- PNG with transparency: Hide the background and export a PNG if you plan to composite the subject over footage.
- Flattened JPEG or PNG: Fine for stills and social posts.
Keep your layer names clear before exporting. A file with fifteen layers named "Layer 7" costs time later.
Taking the Look into Motion
A Procreate image works best as a style frame or an asset. For motion projects, bring it into After Effects as a composition with layer sizes preserved so your blend modes and glow layers stay editable. From there, a few moves go a long way:
- Animate a mask or a scan-line bar sweeping across the image to reveal the X-ray layer over a normal photo.
- Add a Glow effect or a blurred duplicate set to Add for flicker and pulse.
- Use a Turbulent Displace or a subtle noise layer to create the faint instability seen in medical monitors.
- Match grain and color to the rest of your shot with a final adjustment layer.
Troubleshooting Common Problems
The image looks like a plain blue negative. You likely skipped the interior structure and translucency steps. Add inner detail and mask back the outer surface.
Highlights are blown out. Revisit Curves and pull the top of the curve down slightly. Check your glow layers, which often add more brightness than intended.
Gradients show banding. Add fine noise over the final image, and export at full resolution without heavy compression.
The blue feels too saturated and digital. Shift your cyan stops toward a paler, slightly desaturated tone and let highlights approach white. Real radiographic displays rely on value more than saturation.
Everything feels flat. Increase the contrast between your darkest background and your mid-density areas, and add a few brighter overlap regions.
Final Checklist
- Subject isolated or on a dark background
- Inverted and curve-adjusted for strong mid-range
- Gradient Map or controlled blue colorization
- Glow built from blurred duplicates
- Hand-painted internal structure
- Masked translucency
- Noise and scan texture
- Layered export ready for compositing
Once you have a repeatable stack of layers and adjustments, you can duplicate the file and swap in new source images in minutes, which makes the look easy to extend across a full set of shots.