How to Create Bleed in Procreate
StyleFrame Team7 min read
Procreate has no dedicated bleed setting, so you create bleed by building the canvas larger than the finished print. Set the canvas to your trim size plus the printer's bleed on every side, usually 0.125 in (3 mm), so an 8×10 in print becomes an 8.25×10.25 in canvas. Add a guide layer for the trim line and safe zone, paint your background to the canvas edge, hide the guide, and export. If the printer needs crop marks or a print-spec PDF, finish the file in a layout app.
What bleed, trim, and safe zone mean
Three measurements matter for any edge-to-edge print:
- Trim size: the finished dimensions after cutting.
- Bleed: artwork that extends past the trim line. Print shops cut stacks of paper, and the blade never lands in exactly the same place twice. Bleed gives it something to cut through, so you don't get thin white slivers along the edges.
- Safe zone: an inner margin where text, faces, and signatures stay. Cutting drifts inward as well as outward, so anything near the trim line can be clipped.
The common starting point is 0.125 in (3 mm) of bleed per side, and a safe margin of roughly 0.25 to 0.5 in depending on the product. Printers publish their own specs, and those always override a rule of thumb. Check the template or guidelines before you open Procreate.
Step 1: Calculate the canvas size
Add twice the bleed to each dimension, once for each side. At 300 DPI, the pixel sizes work out like this:
If the piece is a children's book spread or anything bound, the printer may also specify a gutter margin. Add that to your safe-zone planning, not to the bleed.
Step 2: Create the canvas
- In the Gallery, tap + and then the custom canvas icon.
- Set the units (inches, mm, or px), enter the bleed-inclusive width and height, and set DPI to 300 or whatever your printer asks for.
- Choose the color profile. Procreate offers CMYK profiles, but many illustrators paint in RGB and convert at the end. Ask your printer which they prefer.
- Name the canvas with the trim size, such as "Poster_8x10_trim_bleed", so you remember what it is later.
Step 3: Make the trim and safe guides visible
Because Procreate doesn't show where the bleed ends, you have to mark it yourself. One workable method:
- Create a second, temporary canvas at the exact trim size and fill a layer with any solid color.
- Copy that layer and paste it into your bleed canvas. Center it so it fills the trim area and leaves an even bleed border around it.
- Select the pasted layer's contents, invert the selection, and fill the outer ring on a new layer with a contrasting color.
- Lower that layer's opacity and keep it on top. Now you can see the bleed zone while you paint without it overpowering the artwork.
- Repeat the process with a smaller rectangle for the safe zone, using a different color, so you can see where text and key details belong.
Group these guide layers and name the group "GUIDES, hide before export." Hiding that group is the last thing you do before exporting.
Step 4: Paint through the bleed
Backgrounds, textures, color fields, and any element that touches the edge must continue into the outer ring, all the way to the canvas boundary. Two habits help:
- Build the background first, on its own layer, extending to the full canvas.
- Keep faces, lettering, and anything essential inside the safe-zone guide, even if the composition feels tight.
Avoid ending a border or frame in the bleed ring. If a printed frame has to sit exactly inside the trim, the slight shift from trimming will make it look uneven. Either extend it as full-bleed color or place it well inside the safe zone.
Step 5: Export for print
- Hide the guide group and double-check that nothing else, like a sketch layer, is visible.
- Tap Actions (wrench) → Share and pick the format your printer accepts, such as PDF.
- Open the exported file and check the pixel dimensions. They should match your bleed-inclusive size.
- Send the file with a note of the trim size and bleed amount, so the printer doesn't have to guess.
Don't rely on a share-sheet checkbox to add bleed later. The bleed has to exist in the artwork itself, because there's nothing to extend afterward.
Adding bleed to artwork that's already finished
If the piece was painted at exactly the trim size, you have a few options, in rough order of preference:
- Extend the canvas. Use Canvas → Crop & Resize, enter the larger dimensions, and then paint or clone background into the new border. This works best for flat color, gradients, and soft textures.
- Scale up slightly. Enlarging an 8×10 piece to 8.25×10.25 is only about a 3% increase. It works when there is breathing room around the subject. It fails when elements already touch the edge, and it can slightly soften the image, so confirm the resolution still meets your printer's minimum.
- Rebuild the edges. For detailed backgrounds, duplicate and mirror edge strips, then paint over the seams. Zoom in along every edge afterward to check for visible lines.
When the artwork can't be extended convincingly, ask the printer whether they can print with a white border instead, or redesign the edge so the image doesn't need to bleed.
Crop marks, PDFs, and print-spec files
Procreate has no dedicated bleed feature and doesn't draw printer marks, so illustrators who need crop marks or a print-spec PDF typically move the file into a layout application. Affinity Designer on iPad is one option: import the Procreate file, set the document bleed, add crop marks, convert to the required CMYK profile, and export a PDF. Photoshop and Illustrator also offer a dedicated bleed field in their new-document dialogs on desktop.
For multi-page books, build the pages in a layout app and import each Procreate illustration as a placed image. That way the bleed, margins, and gutter are defined once for the whole document.
Common mistakes
- Setting the canvas to trim size and calling it done. The artwork then has nowhere to extend.
- Adding bleed to only some sides. Use even bleed on all four sides unless the printer says otherwise.
- Exporting with guides visible. Colored guide rings get printed.
- Placing signatures or text in the bleed ring. They will be cut off.
- Converting color at the wrong time. Confirm the printer's color-profile requirement before you start, so vibrant colors don't dull at the end.
Bleed thinking for motion work
Motion designers will recognize the idea: it's overscan. If you bring Procreate illustrations into After Effects for parallax, camera moves, or shake, a canvas that matches the frame exactly will show empty edges the moment you push in or rotate. Build the artwork larger than the comp instead. For a 1920×1080 comp with 10% overscan, paint at 2112×1188. For 3840×2160, that's 4224×2376.
The workflow mirrors the print one: set the canvas size first, mark the action-safe or title-safe area on a guide layer, paint backgrounds past the frame, and hide the guides on export. Two differences are worth noting:
- Work in RGB for video, since CMYK only matters for print.
- Export key elements on separate layers, such as background, midground, and foreground, as PNGs with transparency, so you can animate them independently in After Effects or Nuke.
Where Styleframe fits
Once the illustration exists, is one tool you can explore for moving it into motion. Your compositing stays where it is, and the overscan you painted into your Procreate canvas still gives you room to move the camera in comp.
Quick checklist
- Confirm the printer's bleed and margin requirements.
- Canvas = trim size + bleed on all sides, at 300 DPI.
- Add trim and safe-zone guide layers.
- Paint backgrounds to the canvas edge.
- Keep key content inside the safe zone.
- Hide guides, export, and verify pixel dimensions.
- Use a layout app when you need crop marks or print-spec PDFs.