How to Create Binder Rings in Procreate
StyleFrame Team8 min read
To create binder rings in Procreate, draw one ring as a clean open loop on its own layer, shade it to read as metal, then duplicate it along the page edge at even spacing. Split each ring into a back half and a front half, so the paper appears to pass through the ring. Build one ring well, group it, and let duplication and a drawing guide handle the rest, so the set stays consistent and easy to export for motion work.
What You're Actually Building
"Binder rings" can mean two things in digital illustration. One is the metal hardware of a ring binder, with a rounded or D-shaped loop clamped through a spine. The other is the row of rings along the edge of a planner, notebook, or sticker sheet, which are usually simpler loops threaded through punched holes.
The approach below covers both. The hardware version adds a mounting base and more detailed shading. The notebook version needs only the loop, the hole, and a shadow. Decide which you need before you start, because it affects canvas size, line weight, and how much detail the rings need to hold up at the intended scale.
Set Up the Canvas for Reusable Rings
Start with a canvas larger than you think you need. Rings are small, repeated details, and any rescaling later will soften edges. If the artwork may end up in a motion project, work at or above the final delivery resolution so you can crop or scale a hero shot without rebuilding.
Use a transparent background and keep the paper on its own layer. Rings sit in front of and behind the page, so you'll need the paper separated from everything else.
Turn on a drawing guide. A simple grid helps you align holes and ring centers. Set the grid spacing to match the interval you want between rings, so duplicated rings snap into rhythm visually.
Step 1: Draw the Base Ring Shape
Create a new layer and name it something like "ring_base." Choose a smooth, consistent brush with little texture. A hard, round brush with stable edges works better than a textured one for hardware.
Draw an ellipse. Most tablet illustration apps offer a shape-snapping gesture: draw the ellipse and hold at the end of the stroke so it corrects into a clean shape. Then use the transform tool to adjust proportions.
For a standard notebook ring, you want a tall, narrow loop that is open at the bottom, since it clamps into a base or passes through paper. Two ways to get that:
- Draw a full ellipse outline, then erase the bottom portion where it meets the page.
- Draw a thick stroke with the ellipse tool, then select and delete the lower arc.
Keep the stroke thickness consistent. Avoid tapering; real metal rings have uniform wire.
Step 2: Give the Ring a Metal Look
A flat gray loop reads as a diagram. Metal needs a few controlled value shifts.
Use alpha lock or a clipping layer above the base so shading stays inside the ring shape. Then build the look in passes:
- Mid tone. Fill the entire ring with a neutral mid-gray or a slightly tinted silver.
- Shadow side. Choose a darker tone and paint along the inner edge on the side away from your light source. Keep the edge soft but controlled.
- Highlight. Add a narrow, bright highlight along the opposite edge. Metal highlights are thin and high-contrast, so keep them tight.
- Reflected light. A faint, cooler or warmer band opposite the highlight suggests environment reflection and stops the ring from looking like plastic.
Because the ring is a tube curving around, the highlight should follow the curvature. Paint it as a continuous arc rather than a straight stripe. If your hand wobbles, use a stabilization setting on your brush, or draw the highlight with the same shape tool you used for the base and offset it.
Step 3: Split the Ring Into Front and Back
This is the step that sells the illusion. A ring passing through paper has two visible parts: the section behind the page and the section in front.
Duplicate your finished ring layer. Name one "ring_back" and the other "ring_front." On the back copy, erase everything except the portion that should appear behind the paper. On the front copy, erase the portion that sits behind. Typically the top of the arc sits behind the paper and the lower section comes forward, but it depends on how the ring is threaded.
Then position the layers in this order, from bottom to top:
- ring_back
- paper
- ring_front
Now the ring appears to thread through the page. If the join between the halves shows a seam, paint a small overlap on the front layer or smooth the transition with a soft eraser.
Step 4: Add the Holes and Contact Shadows
Rings need something to pass through. On the paper layer, create a hole shape: a small ellipse near the page edge, filled with the background color or erased to transparency if you want what's behind to show through.
Add a subtle inner shadow along one edge of the hole to give the paper thickness. A slightly darker rim on the side facing the light reads as a cut edge.
Then add contact shadows. Create a layer below ring_front and above the paper, and paint a soft, low-opacity shadow where the ring touches the page. Keep it small and close to the ring. Heavy drop shadows make rings look like they're floating.
Step 5: Duplicate and Space the Rings
Group the ring layers (back, front, hole, and contact shadow) into one folder. Duplicate the group and move it along the page edge.
For even spacing:
- Use your grid or drawing guide as the reference.
- Nudge each duplicate with the transform tool using snapping options if available.
- Check the distances by zooming out and scanning the row. Uneven spacing is easy to see at small sizes.
If you need many rings, duplicate in sets: two become four, four become eight. This keeps spacing errors from accumulating. Merge only when you're satisfied, and keep an unmerged copy of the group so you can fix the original later.
Small variation can help. A tiny difference in highlight position or brightness across the row can prevent a mechanical look, but keep it subtle. For a clean, graphic style, identical rings are fine.
Variations Worth Trying
D-ring. Replace the ellipse with a shape that has a flat vertical side on one edge. The flat side sits against the spine and the curve extends toward the page.
Open ring. Draw the loop with a visible gap and a hinge, then add a small mechanical base with its own shading. This works best for close-up shots.
Coil binding. Instead of an open ring, draw a tilted loop that wraps around the page edge. Duplicate it at a slight angle with consistent spacing. Front and back splitting still applies, but the diagonal tilt carries more of the visual rhythm.
Colored or enamel rings. Swap the neutral gray for a saturated base and keep the highlight near white. The same layered approach works.
Export for Motion and Compositing
If the rings are headed into a motion project, export with compositing in mind.
- Export a layered file if your pipeline supports it, so ring_back, paper, and ring_front arrive as separate elements. This lets you animate pages turning or flipping while the rings stay anchored.
- Export transparent PNGs for individual elements when you need lightweight assets.
- Keep shadows on separate layers so you can adjust opacity or blur in your compositing software without repainting.
- Name layers clearly. A row of identically named "Layer 14" folders becomes painful in a comp.
In compositing software, the front and back separation lets you place the page between them in z-space, rotate it slightly, and keep the illusion of threading intact. In 3D software, the same layers can be placed as planes at slightly different depths to get parallax.
Common Mistakes to Avoid
- Ring too thick or too thin. Compare it to the page size. Wire that reads correctly in a close-up often looks heavy when the page is small.
- Skipping the front/back split. Without it, rings look pasted on top of the page.
- Inconsistent light direction. Highlights on the rings, shadows on the page, and hole shading should all agree.
- Over-textured brushes. Texture can look like dirt or noise at small sizes and shimmer in motion.
- Merging too early. Keep the original ring group until the final export.
Quick Workflow Recap
- Set up a large canvas with a grid and a separate paper layer.
- Draw a clean, open ring on its own layer.
- Shade it with mid tone, shadow, highlight, and reflected light, using alpha lock or clipping.
- Duplicate and split into back and front layers, with the paper between them.
- Add holes, rim shading, and contact shadows.
- Group, duplicate, and space evenly along the page edge.
- Export layered or as transparent elements for compositing.
Build the first ring carefully, and the rest of the set takes minutes. The structure of the layers matters more than the rendering style, because it determines how well the artwork survives the move into animation.
FAQ
Can I make binder rings without a drawing guide? Yes, but a grid or guide makes spacing and alignment much faster and more consistent.
Should I draw rings as vector shapes instead? Vector tools are a fine choice for crisp, scalable hardware. Procreate's advantage is painterly shading and a hand-drawn feel, so choose based on your final look.
How many rings should a page have? It depends on the style. Realistic binders follow standard layouts, while illustrations can use fewer, larger rings for readability.
How do I keep rings from looking flat? Use a consistent highlight arc, a clear shadow side, and contact shadows where the metal meets paper.