How to Connect Adonit Jot Pro to Procreate
StyleFrame Team8 min read
The Adonit Jot Pro is generally described as a passive stylus with no Bluetooth pairing step, so there is typically nothing to connect. A passive stylus behaves like a fingertip on a capacitive touchscreen. Open Procreate on your iPad, select a brush, and draw. Only Adonit's older Bluetooth models, such as the Jot Touch and Jot Script, needed to be paired inside a compatible app, and Procreate isn't named in Adonit's support text for them.
Why the Jot Pro doesn't pair
Adonit has sold two kinds of Jot styluses, and the confusion comes from mixing them up.
- Passive Jot models (the Jot Pro line): These are generally described as having a clear disc tip and no battery or radio. The iPad sees them as a touch input, the same way it sees a finger, so there is no LED, pairing button, or Bluetooth menu.
- Bluetooth Jot models (Jot Touch, Jot Script): These use Bluetooth 4 LE and Adonit's Pixelpoint technology. They require a compatible app to unlock features like palm rejection and, on the Touch, pressure sensitivity.
If you've searched your iPad's Bluetooth settings for "Jot Pro" and found nothing, that's expected. The stylus is working as designed.
How to use a Jot Pro in Procreate
- Check the tip. Make sure the disc tip is clean and seated firmly. Dust or oils on the tip or screen cause skipped strokes.
- Open a canvas in Procreate. Create a new canvas or open an existing artwork. No stylus-specific setup is required.
- Pick a brush and draw. Touch the tip to the screen. Procreate registers it as a touch input.
- Adjust your gesture settings. Open the Actions menu (wrench icon), go to Prefs, then Gesture controls. Menu names shift slightly between Procreate versions, but this is where you control how touch gestures behave while you draw.
- Set stabilization. In the Brush Studio, add Streamline or Stabilization to the brush so a rigid disc tip produces smoother lines.
That's the whole process. If strokes register, you're connected.
What to expect from a passive stylus
Knowing the limits up front saves a lot of troubleshooting time.
No pressure or tilt
A passive tip sends position, not force. Brushes that rely on pressure to vary size or opacity will produce a uniform line. Workarounds that work in practice:
- Lower the pressure dependence in the brush settings so the stroke looks intentional rather than flat.
- Use the size and opacity sliders on the left sidebar to set values per stroke.
- Build line variation with layers, or by adjusting stroke taper settings where the brush supports it.
Palm rejection is not a stylus feature here
Adonit's support documentation ties palm rejection to Bluetooth models paired inside a compatible app. A passive Jot Pro doesn't provide it. Your hand resting on the glass can register as touches. Practical fixes include:
- Wearing a two-finger drawing glove.
- Placing a sheet of paper under your palm.
- Turning off touch actions in Procreate's gesture controls so stray contact doesn't trigger undo, zoom, or other shortcuts.
Precision comes from the disc tip
The clear disc lets you see where the contact point lands, which suits line work, thumbnails, and tracing over reference. It is less suited to expressive, pressure-driven inking.
If your Jot is a Bluetooth model
If your stylus has a button and an LED, you likely own a Jot Touch or Jot Script. The pairing flow Adonit documents works like this:
- Press and hold the pairing button until the LED starts flashing. On the original Jot Script, blinking green means it's broadcasting. On the Jot Script 2, blinking blue means the same.
- Open a compatible app. Pairing happens inside the app, not in iPadOS Bluetooth settings.
- Open the app's stylus menu and press the stylus tip in the on-screen pairing circle until you get a confirmation.
- Set your writing angle, palm rejection, and shortcut buttons in the same menu.
Two caveats matter for Procreate users:
- These styluses were built around apps that integrated Adonit's technology. Adonit's materials point to a list of compatible apps, and Procreate isn't named in the support text you'll find for these models. Without that integration, a paired Bluetooth Jot won't deliver pressure or palm rejection in Procreate, and the tip will usually just behave as a basic touch tool.
- The Jot Script is documented as working "just like your finger" on any capacitive screen, but palm rejection and precision features require a compatible app and a Bluetooth 4 iOS device. Older iPads running old iOS versions have extra compatibility limits.
If pressure sensitivity matters to your workflow, the practical choice is a stylus that Procreate explicitly supports, such as an Apple Pencil, rather than a legacy Adonit model.
Troubleshooting a Jot Pro in Procreate
Strokes skip or break. Clean the disc tip and the screen with a microfiber cloth. Check that the tip isn't loose or cracked.
Lines look shaky. Raise the brush's Streamline value, or use a smoother brush. A disc tip magnifies small hand movements.
Canvas zooms or undoes while you draw. Your palm or fingers are triggering gestures. Disable touch actions in gesture controls, or change your hand position.
Nothing happens when you touch the screen. Confirm the iPad isn't in a state where touch is locked, such as a Guided Access session. Test with a fingertip. If the finger works but the stylus doesn't, the tip is likely damaged or dirty.
The stylus doesn't show up in Bluetooth. That's normal for a passive Jot Pro. Only Bluetooth models appear in pairing flows.
Taking Procreate artwork into a motion pipeline
Many motion designers and animators use Procreate for the stage before After Effects: thumbnails, mood boards, character sketches, and styleframes. A passive stylus is adequate for that kind of line work, since you're defining shapes and composition rather than finishing production art.
Once the drawings exist, the next question is how to get them moving without redrawing every frame. This is where fits. It's an AI video and motion tool built for artists who want control rather than a one-click result, and every generation is driven by your own references, clips, and keyframes.
A few practical ways it can sit after your Procreate work:
- Frames-to-Video: Export two or more Procreate frames as keyframes, such as a pose at the start and a pose at the end. Styleframe generates the motion between them, so the animation is anchored to your drawings rather than invented from a text prompt.
- Restyle and Ink-and-Paint: Use a Procreate drawing as the style reference and apply its look to footage or generated clips. This is reference-driven style transfer, so your linework and palette remain the source of the aesthetic.
- 2D-to-3D and Turntable: Turn a character or prop sketch into a 3D-style asset, then produce a turntable pass to check it from several angles.
You can try several approaches from the same Procreate source, then bring the result into After Effects or Nuke and keep compositing, color, and finishing where they already live.
None of this depends on which stylus you used. A Jot Pro sketch and an Apple Pencil sketch are both just images once exported, so the stylus matters mainly for how comfortable the drawing stage is.
Export tips for pipeline-ready Procreate files
- Work at a high resolution. Set the canvas size with the final output in mind, especially if you plan to use the art as a keyframe or style reference.
- Keep layers organized. Name layers and separate line art, color, and background so you can export them individually.
- Export PNG for transparency. Use PNG when you need alpha channels for compositing. Use PSD if you want to continue refining layers in Photoshop or another editor.
- Number frames consistently. If you draw an animation sequence, name files with zero-padded numbers so After Effects, Nuke, or Styleframe read them in order.
- Match aspect ratio to your comp. Draw in the same aspect ratio as the video project to avoid cropping or stretching later.
FAQ
Does the Adonit Jot Pro need a battery or charging? A passive stylus generally doesn't. Only the Bluetooth models, such as the Jot Script, use batteries. The original Jot Script uses a AAA lithium battery, and the Jot Script 2 uses a rechargeable one.
Can I get pressure sensitivity with a Jot Pro in Procreate? No. A passive tip doesn't transmit pressure data. You can approximate variation through brush settings and manual size or opacity changes.
Will the Jot Pro work on any iPad? It works on capacitive touchscreens generally, so it should work with any iPad that runs Procreate. Bluetooth Jot models have stricter requirements, including Bluetooth 4 LE.
Is there a Procreate setting called "connect stylus"? No. Procreate has gesture and brush settings but no pairing menu for passive styluses.
Bottom line
Connecting a Jot Pro to Procreate takes no setup beyond opening a canvas and drawing, because the stylus acts like a finger. Expect no pressure, tilt, or built-in palm rejection, and adjust brush stabilization and gesture settings to compensate. If you want to carry your sketches forward into animation, export them cleanly and use them as keyframes and style references in a tool like Styleframe, then finish in After Effects or Nuke.