How to Colorize Black and White Photos Procreate
StyleFrame Team8 min read
To colorize a black and white photo in Procreate, import it, create new layers above it set to the Color blend mode, and paint flat colors region by region while the original photo keeps all the tonal detail. Refine the result with Color Balance, Curves, and the Recolor tool, then export a layered PSD or PNG. The technique is manual painting rather than automatic AI colorization, so you decide every color and the result is only as accurate as your reference.
Prepare the Photo Before You Paint
Good colorization starts with a clean grayscale base. Spend a few minutes here and the painting stage goes much faster.
- Import at the highest resolution you have. Use the Actions menu to insert the photo, and create the canvas at the photo's native size or larger if you plan to crop or push in later.
- Check that it is truly grayscale. Scans and old prints often carry a sepia or blue cast. Open Adjustments > Hue, Saturation, Brightness and pull Saturation fully to the left. Color is painted from scratch, so a tinted base will contaminate your hues.
- Fix tonal range first. Open Adjustments > Curves and watch the histogram. Faded prints usually have no true blacks or whites. Pull the black and white points inward until the histogram spans the full range, then nudge the midtones. Colorizing a flat image yields flat color.
- Duplicate the photo layer and hide the copy. This is your untouched reference in case you need to go back.
If your source is a color photo you want to convert, a Luminosity-based conversion often preserves tonal relationships better than a straight desaturate. Place a white layer between two copies of the photo and set the top copy to Luminosity.
The Core Workflow: Color Blend Mode Over the Photo
There are two common ways to layer color in Procreate. One is to keep the photo on top in Multiply and paint underneath it. That approach works well for line drawings and illustrations, but it gets muddy on photographs with large midtone areas. For photos, the more controllable method is painting on layers above the image and using the Color blend mode.
1. Set up a layer structure
Create a new layer above the photo for each major region: skin, hair, clothing, background, and so on. Set each layer's blend mode to Color. In this mode, the layer contributes hue and saturation while the photo underneath supplies luminance, so shadows and highlights stay intact.
Organizing by region matters because you can adjust each one independently later. A single "all color" layer is a trap. Changing one jacket means repainting everything around it.
2. Block in flat colors
Pick a hard-edged brush and paint approximate color shapes. Don't worry about perfect edges yet. A few ways to keep edges tidy:
- Use Selection (Automatic or Freehand) around a region, then fill with ColorDrop or a brush, so color stays inside the lines.
- Use Alpha Lock or a Clipping Mask when you want to repaint inside an existing color shape without spilling out.
- Lower the layer opacity as needed. Fully saturated fills almost always look artificial on old photographs.
3. Start with skin tones
Skin is where viewers notice errors first. Build it up in stages:
- Fill the face and hands with a muted base tone.
- On a separate Color layer, add warmer hues to cheeks, ears, nose, and knuckles at low opacity.
- Add cooler tones in shadow areas, since skin in shadow rarely just gets darker; it shifts in hue.
- Soften transitions with a soft brush or the Smudge tool.
Keep saturation lower than your instinct suggests. Real archival-style colorizations tend to look believable because the colors are restrained.
4. Work outward to clothing, objects, and background
Use real references where you can. If the photo is historical, look for period-correct fabric colors, uniforms, vehicles, or architecture. If you're colorizing a family photo, ask relatives about colors they remember. Guessing is acceptable for creative work, but state it clearly if the image is presented as documentary.
5. Add depth with a second pass
Flat Color-mode fills can feel pasted on. A second pass makes the image feel photographed:
- Add a Soft Light or Overlay layer above the color layers to push warm light into highlights and cooler tones into shadows.
- Add subtle color variation inside large regions, such as a sky that shifts slightly from horizon to top, or a wall with faint hue drift.
- Paint a little color into the black areas of hair, cloth, and shadows. Pure neutral black next to colored objects looks disconnected.
Refine With Procreate's Adjustment Tools
Procreate's adjustments let you fix color problems without repainting.
- Hue, Saturation, Brightness: The quickest way to dial back an overcooked layer. Reduce saturation on a single region layer rather than the whole image.
- Color Balance: Offers RGB sliders and separate Shadows, Midtones, and Highlights controls. Use it on a grouped set of color layers to warm or cool the overall look. Midtones are the default and give the most even adjustment.
- Curves: Lets you adjust both color and contrast, so you can add a gentle warm cast to highlights and a cooler one in the shadows. The histogram helps you see where tones are clipping.
- Recolor: Tap a spot with a chosen color and it recolors that area, which is handy for quickly testing alternate color options for a dress or a car. Results depend on how clean the underlying shapes are, so you may still need to clean up edges.
Apply adjustments to a group or an individual layer rather than flattening. Keeping everything live means you can revisit decisions when a client asks for a different shade.
Common Problems and Fixes
Colors look painted on, not part of the photo. Lower opacity, switch some layers between Color and Soft Light, and add a very light film grain layer over everything to unify the texture.
Skin looks gray or sickly. Raise saturation slightly on a separate Color layer and add warm tones to the midtones. Check that your base photo's contrast isn't pulling the skin toward gray.
Edges bleed into neighboring regions. Switch from freehand painting to selections and clipping masks, and zoom in to clean edges on a separate pass.
Everything has the same saturation. Real scenes have a hierarchy. Let the subject carry the strongest color and keep backgrounds subtler.
Blend modes behave differently after export. Check this early. Blend modes may not translate perfectly between apps, so verify in your destination app instead of assuming a perfect match.
Bringing the Colorized Photo Into a Motion Pipeline
For motion designers, a colorized photo is usually an asset, not the final product. A typical handoff looks like this:
- Export a layered PSD from Procreate, or flatten to a high-resolution PNG for simpler use.
- Import into After Effects as a composition, retaining layers if you want to animate or grade regions separately.
- Confirm blend modes survived the trip. Rebuild any that didn't with After Effects' own blending modes.
- Use your usual tools to add parallax, camera moves, or depth separation. If you're building a documentary-style move, split foreground, midground, and background onto separate layers.
- Grade the shot in context. Colorized stills often need a pass of grain, halation, or lens softness to sit alongside live footage.
Remember that Procreate is built for painting on an iPad canvas, not color-managed video work. If your project requires a specific color space, check how the file looks in your compositing app and correct it there.
Where Styleframe Fits for Moving Images
Procreate handles the still. If your goal is to bring a colorized photograph to life as a shot, that is where can come in. It's an AI video and motion tool aimed at artists who want direct control, so the process is driven by your own reference images rather than a one-click prompt.
A practical way to use it with this workflow:
- Use your colorized still as a reference: Because you start from your own image, the color decisions you made in Procreate stay anchored to your intent.
- Keep a consistent look across frames: If you want a series of related frames to share the same look, use a reference-driven approach from your colorized image rather than repainting each frame by hand.
You keep your compositing workflow and use Styleframe for the generative step.
It's worth being realistic: any generative step can drift from your reference, particularly in fine details like patterned fabric or faces. Review output frame by frame, and fix problem areas in your compositor as you would with any other source.
Quick Checklist
- Clean up the grayscale base and set proper black and white points.
- Create one Color-mode layer per region.
- Use selections and clipping masks for tidy edges.
- Keep skin tones restrained and add warm and cool variation.
- Add a Soft Light or Overlay pass for lighting depth.
- Refine with Color Balance and Curves on grouped layers.
- Export PSD, verify blend modes in After Effects, and add grain to integrate.
- If the still needs to move, use it as a keyframe reference for animation instead of repainting every frame.
Colorizing by hand takes longer than an automatic filter, but it gives you something automatic tools cannot: every color is a deliberate choice you can defend, adjust, and carry into the rest of your pipeline.