How to Color Match a Photo on Procreate
StyleFrame Team8 min read
To color match a photo in Procreate, touch and hold on the photo to open the eyedropper ring, drag to the shade you want, and release. That shade becomes your active color. You can also tap the square between the Size and Opacity sliders to get the same eyedropper, or save sampled colors from the photo into a palette in the Palettes tab. To match the overall grade of one photo to another, sample key tones and then adjust with Curves, Color Balance, and Hue, Saturation, Brightness.
What "Color Match a Photo" Means in Procreate
The phrase covers two jobs, and they use different tools.
- Sampling color from a photo so you can paint, illustrate, or build a palette that matches it. This is the eyedropper and palette workflow.
- Matching one image's overall look to another's, such as warming a cool photo to fit a reference. This is a grading workflow built on Adjustments and blend modes.
Most tutorials cover only the first. Motion designers and editors usually need both, so this guide covers each and then shows where Procreate's limits send you back to your compositing tools.
Method 1: Touch and Hold to Sample
This is the fastest way to pull a color from a photo already on your canvas.
- Open your canvas and make sure the photo is visible. Import it via Actions > Add > Insert a photo if it isn't there yet.
- Touch and hold on the area you want to sample.
- A ring appears under your finger or Apple Pencil. The lower half shows your current active color. The upper half shows the color under the cursor.
- Drag until the top half shows the shade you want, then lift.
The sampled color now shows in the Color Panel disc in the top-right corner. Paint with it on a new layer, not on the photo itself.
If the eyedropper behaves unexpectedly, check the gesture controls under Actions > Prefs > Gesture Controls. That matters when the photo sits under adjustment or overlay layers.
Method 2: The Modify Button
If you prefer a visible control to a gesture, use the small square on the left sidebar, between the Size and Opacity sliders. Tap it and an eyedropper appears that you can drag to any point on the canvas. Release to set the color.
This method is better for precision. You can place the sampler carefully, nudge it, and avoid accidental taps or strokes. It is also friendlier for anyone working with a stylus and no touch gestures enabled.
Method 3: Use the Photo as a Reference Image
Sampling from a photo you are also painting over can get messy. A cleaner approach is to keep the photo outside your artwork.
- Go to Canvas > Reference.
- Choose Image and import your photo.
- Position and resize the floating reference window beside your work.
- Touch and hold inside the reference window to sample colors from it.
The benefit is that your canvas stays uncluttered, and you can't accidentally paint on or move the source. You also compare your work to the original at a glance, which is the real test of whether colors match.
Method 4: Build a Palette from the Photo
When you need several colors from one image, save them in a palette instead of sampling one at a time.
- Open the Color Panel and switch to the Palettes tab.
- Tap the + button to create a new palette.
- Sample a color from your photo with the eyedropper.
- Tap an empty swatch in the new palette to save the color.
Repeat this for the shadows, midtones, highlights, and any accent colors you care about.
Name the palette after the project so it stays findable.
Use the Color History Row
The Color Panel keeps your last ten colors in History. If you are sampling quickly, the History row lets you jump back to a shade you passed over. On the color wheel, the secondary reticle also shows your most recent color beside the new one, so you can compare two samples directly.
Getting Exact Values with the Value Tab
Eyedropper sampling is good for visual matching. When a brand or client needs exact numbers, open the Value tab in the Color Panel. It shows numerical sliders and a hexadecimal field.
Sample the color, switch to Value, and read the hex. You can type a hex code to set a color exactly, which is useful when you receive specs from a brand guide or a compositor's color notes. It also lets you write the values down and reuse them in another application.
One caution: a single-pixel sample of a photograph can be noisy. Grain, compression artifacts, and sensor noise mean one pixel may not represent the area. Sample a few spots and judge by eye, or blur a duplicate layer first and sample from that.
Matching One Photo's Grade to Another
When the goal is to make one image feel like another, work in layers and sample intentionally.
Step 1: Identify the anchor tones
Put the reference and target side by side. Use the Reference window for one and the canvas for the other. Sample three things from the reference: the darkest shadow, a neutral midtone, and the brightest highlight. Save them as swatches. Add a skin tone or a dominant environmental color if the image has one.
Step 2: Adjust tone first
Under Adjustments > Curves, work on luminance before color. Match the black point and white point, then adjust the midtone curve until the contrast feels similar. Color judgments are unreliable when the tonal range is off.
Step 3: Shift color balance
Use Color Balance to push shadows, midtones, and highlights toward the hues in your reference. Small moves matter. If the reference has teal shadows and warm highlights, push each range gently in that direction instead of tinting the whole image.
Step 4: Fine-tune with Hue, Saturation, Brightness
Use this adjustment to correct overall saturation or nudge a hue that drifted. Apply adjustments to a duplicate layer so you can compare to the original.
Step 5: Try a Gradient Map or Color layer
A Gradient Map built from your sampled shadow, midtone, and highlight swatches remaps luminance to your reference palette. Set that layer to a blend mode such as Color or Soft Light and lower the opacity until it supports the image instead of overwhelming it.
Step 6: Compare constantly
Check the result against the reference at several zoom levels. Toggle layers on and off. If skin or neutral surfaces look wrong, fix those first, because viewers notice them before anything else.
Where Procreate's Color Matching Runs Out
Procreate is a strong tool for painting and quick palette extraction, but it isn't a grading environment. Know the limits before you rely on it for production color.
- No verification. Don't rely on Procreate to confirm that two images actually match. Use scopes such as waveforms, vectorscopes, or histograms in a grading tool. In Procreate you are judging by eye.
- Display dependence. An iPad screen is not a calibrated grading monitor. Don't assume what you see will survive a different display.
- Manual and subjective. Every match depends on your eye and hand, which makes repeating it across many frames slow.
For these reasons, many professionals use Procreate to find and define a palette, then move the actual matching into software built for it.
Taking a Matched Look into a Motion Pipeline
A common workflow is to use Procreate for look development and your compositing tool for execution.
- Sample colors from a photo or reference and save them as a palette.
- Record hex values from the Value tab for key tones.
- Export the matched frame as an image.
- Bring the swatches and the matched still into After Effects, Premiere Pro, or Nuke, and use them as a target for grading or color-correction nodes there. Use scopes to verify the match.
Common Mistakes to Avoid
- Sampling from a layer with effects on it. The color you pick may not be the color you see. Confirm what the eyedropper is sampling.
- Trusting a single pixel. Photo noise skews single-point samples. Sample several spots.
- Adjusting color before tone. Fix contrast and black and white points first.
- Over-correcting. Small, layered adjustments look more natural than one strong shift.
- Painting on the original photo. Keep the source untouched on its own layer or in the Reference window.
- Skipping the side-by-side check. If you never view both images together, you can't tell whether they match.
Quick Answers
Is there an eyedropper tool in Procreate? Yes. Touch and hold on the canvas, or tap the square between the Size and Opacity sliders.
Can I build a palette from a photo? Yes. Create a new palette in the Palettes tab, sample colors from your photo, and tap empty swatches to save them.
Can I get the hex code of a sampled color? Yes. Open the Value tab in the Color Panel.
Can Procreate match a whole photo's grade to another? It can approximate one with Curves, Color Balance, and Gradient Map, but you are judging by eye, so verify serious work in a compositing or grading tool.
Conclusion
For quick sampling, touch and hold or use the Modify square. For multiple colors, import the photo as a reference and build a palette. For matching an overall look, work tone first, then color, and compare side by side. When the work needs to hold up across shots or pass a scope check, take your swatches and matched stills into your compositing pipeline and finish there.