How to Color Inked Lineart in Procreate
StyleFrame Team9 min read
To color inked lineart in Procreate, first isolate the black ink from the white paper so the lines sit on their own transparent layer (or a Multiply layer). Then fill flat colors on a separate layer beneath the lines using Color Drop with the lineart set as a Reference layer. Finish with shading on clipping-mask layers and recolor the lines with Alpha Lock. Keeping lines, flats, and shading on separate layers also makes the file easy to edit and to export into After Effects.
Prepare the inked lineart first
Most coloring problems start with the scan or photo, not the coloring. If the lines still carry a white or gray paper background, every fill you add will fight it.
Import and clean up the scan
Import the image through the Actions menu (wrench icon) using Insert a file or Insert a photo, and scale it to fill the canvas. If you're building a piece for motion work, start with a canvas at or above your final delivery resolution. Upscaling later softens the edges of inked lines.
Before separating the ink, push the contrast so the lines are dark and the paper is close to pure white:
- Open Adjustments (the magic wand icon) and choose Curves, or Levels if you prefer.
- Pull the black point up and the white point down until the paper reads as clean white and the ink stays solid.
- Avoid overdoing it. Crushing the curve too far turns thin, tapered line ends into jagged stairs.
Separate the lines from the paper
You have two reliable options, depending on how much flexibility you need.
Option 1: Multiply blend mode. Tap the "N" on the lineart layer and switch it to Multiply. White becomes effectively invisible and black stays black, so colors beneath the layer show through. This is a quick approach and works well for flat colors. The downside is that the layer isn't truly transparent, so it can misbehave if you export it and drop it over other footage.
Option 2: A true transparent line layer. This takes a few more steps but gives you lines you can recolor and export cleanly:
- Copy the lineart: open the Actions menu, go to Add, and choose Copy Canvas.
- Create a new layer and fill it with any solid color by dragging the color onto the canvas.
- Tap the layer and choose Mask to add a layer mask.
- Select the mask thumbnail (not the layer itself) and paste from the Actions menu.
- Tap the mask and choose Invert, so the ink is opaque and the paper is transparent.
- Hide the original scan and merge the layer and its mask down if you want a single clean layer.
You now have lines in Normal blend mode with real transparency. That matters later for Alpha Lock recoloring and for compositing in After Effects.
Set up a layer structure that survives revisions
Before you fill anything, decide on a stack. A simple one works for most illustrations:
- Lineart (top, locked while you color)
- Shading and highlights (clipping masks)
- Flats (one layer per major element, or one per color family)
- Background (plain color or a separate layer, kept apart from the flats)
Lock the lineart layer by swiping it left and choosing Lock so a stray stroke can't damage it. Name your layers as you go. If the file is headed to a motion designer or an After Effects comp, clear names such as "skin_flat," "jacket_shadow," or "hair_highlight" save real time later.
Separate flats per element are worth the extra effort. If a client wants a different jacket color, you change one layer instead of repainting around the lines.
Lay in flat colors with Color Drop
Color Drop is a fast way to fill inked shapes, and it works best when you let the lineart act as the boundary rather than filling the lineart layer itself.
Use the lineart as a Reference layer
- Select the lineart layer and tap Reference in the layer options.
- Create a new layer below the lineart and make it the active layer.
- Drag a color from the color disc into a closed shape. Hold your pen on the canvas after dropping to adjust the Color Fill Threshold. Adjusting the threshold can help reduce the thin halo you often see around anti-aliased ink.
Because the fill is sampled from the Reference layer but placed on your flats layer, you don't pollute the lines and can redo fills freely.
Handle gaps and leaks
Hand-inked lines rarely close perfectly. If a fill leaks into the neighboring shape:
- Undo and zoom in to find the gap.
- Close it with a hard round brush on a separate "gap fix" layer set as part of your Reference. You can also paint it on the flats layer in the fill color.
- Alternatively, use the Selection tool in Freehand mode to outline the shape, fill the selection, and let the selection edges handle the area the fill couldn't reach.
Fill under the lines, not just up to them
Flats should extend slightly beneath the ink instead of stopping exactly at the line edge. If they stop short, you get a thin white sliver where the anti-aliased line meets the fill. After filling, check the edges at 200 to 400 percent zoom. Where a sliver shows, paint a little extra color under the line with a hard brush on the flats layer.
Add shading and highlights without touching your flats
Once the flats are done, build depth on clipping-mask layers so shading stays inside each shape.
- Add a new layer directly above a flat layer.
- Tap it and choose Clipping Mask. Anything you paint now appears only where the flat layer has pixels.
- Set the blend mode to Multiply for shadows or Add/Screen for light, and lower opacity to taste.
- Paint with a textured or soft brush, depending on whether you're after a cel look or a painterly one.
For a cel-shaded look, use a hard-edged brush and keep to two or three tonal steps. For a softer render, use a low-flow airbrush and build up gradually. Either way, keep the shadow color slightly shifted in hue rather than just darker. A cool, saturated shadow reads richer than a gray one.
If you work over many layers, group the flat and its shading layers together and name the group. Groups make it easy to toggle an element on and off during revisions.
Color the lines themselves
Black lines on colored art can look heavy, especially on small details. Many illustrators tint the ink to match the surrounding colors.
- Make sure the lineart is on a transparent layer in Normal mode (Option 2 above).
- Tap the layer and choose Alpha Lock. Painting is now restricted to the existing pixels.
- Select a color and fill the layer, or paint selectively over regions such as skin, hair, or fabric to give each area its own line color.
- Use a soft brush to blend between neighboring line colors where they meet.
Alpha Lock also lets you change your mind without redrawing anything. Do this near the end, after the flats and shading are close to final, so you can judge the line color against the finished palette.
Troubleshooting common problems
- White fringes around lines: The lineart isn't truly transparent, or the flats stop short of the line. Use the transparent-line method and extend fills under the ink.
- Color covers the lines: Your color layer sits above the lineart. Move it beneath, or set the color layer to Multiply.
- Fills look jagged: The canvas resolution is too low, or Color Fill Threshold is too aggressive. Work larger and tune the threshold.
- Dirty paper texture showing through: Tighten the Curves adjustment, or erase stray specks on the line layer.
- Colors shift on export: Check the canvas color profile in Canvas settings so the exported file matches what you see.
Export for a motion pipeline
If the artwork is going into After Effects or another compositing tool, the way you save the file matters as much as how you colored it.
- PSD export keeps your layers, so motion designers can animate lines, flats, and shading separately. After Effects can import a PSD as a composition with layers intact. Check blend modes after import, since not every Procreate blend behaves identically.
- Transparent PNG works for a single flattened element. Hide the background layer first so the alpha channel stays clean.
- Resolution: Match or exceed your comp size. For 4K delivery, build the canvas at 3840 px or larger on the long edge.
Keep a version of the file with the layers untouched. Flattened exports are fine for approval, but the layered PSD is the one you'll come back to.
Taking colored lineart further with Styleframe
Once your inked piece is colored, the next question for motion work is often how to carry that look across moving frames. Styleframe is an AI video and motion tool built for artistic control, and it's driven by your own material rather than a one-click black box. You can supply a colored Procreate frame as a style reference and use it to guide the look of other footage or frames.
It's a complement to your Procreate-to-comp process, not a replacement for the hand-colored work you've just done.
A quick workflow checklist
- Import the scan at a high resolution and clean it up with Curves or Levels.
- Separate the ink: Multiply for speed, or a transparent line layer for flexibility.
- Lock the lineart and build a named layer structure.
- Set the lineart as Reference and fill flats on a layer beneath it with Color Drop.
- Extend fills under the lines and fix leaks.
- Add shading and highlights on clipping masks.
- Tint the lines with Alpha Lock once the palette is settled.
- Export a layered PSD for compositing, plus a transparent PNG if you need a flat element.
Done in this order, coloring inked lineart in Procreate stays reversible. You can change a palette, redo a shadow, or swap a line color at any stage without redrawing the underlying ink.