How to Color in the Lines on Procreate Pocket
StyleFrame Team7 min read
To color inside the lines in Procreate Pocket, first create a flat base shape for each area, then paint on a layer that can't extend past it. Set your line art as a Reference layer, drag a color into each closed area with ColorDrop on a new layer, and then use Clipping Mask or Alpha Lock so shading and texture stay inside that shape. If you only need a quick one-off fill, the Selection tool in Automatic mode confines your brush to the area you tap.
Each method suits a different job, and the right choice depends on whether you need flat fills, painterly shading, or layers you can still edit later.
Start with clean, closed line art
Every method below assumes your line art sits on its own layer. Before you color, check two things:
- Keep the lines on a separate layer. Never paint on the same layer as your outlines. A dedicated line layer is what lets you recolor, hide, or replace the lines later.
- Close your shapes. Procreate's fill and selection tools read gaps as exits. A single missing pixel in an outline can let a fill leak across the whole drawing. Zoom in and patch gaps with a hard-edged brush before you start.
Create a new layer below the line art for your flat colors. Keeping fills underneath means the outlines stay crisp on top, and you avoid the muddy overlap that appears when color is painted over the lines.
Method 1: ColorDrop with a Reference layer
This is the fastest way to fill clean shapes, and it's the best starting point for flat-color work.
- Open the Layers panel and tap your line-art layer.
- Choose Reference from the menu. The layer is now the source Procreate reads for boundaries.
- Select your empty color layer underneath.
- Pick a color, then drag from the color swatch in the top-right corner into an enclosed area. Release to fill.
- If the fill stops short of the edges of anti-aliased lines, adjust the ColorDrop threshold so it reaches them.
Because Reference reads the line art but fills the active layer, your color lands on the layer below the lines. If the fill leaves a pale halo along the edges, raise the threshold slightly. If it spills through a gap, lower the threshold or close the gap and try again.
Method 2: Clipping Mask for shading and texture
Once a shape has a flat color on its own layer, a clipping mask is the most flexible way to paint inside it.
- Put each flat color area on a layer. A single layer of fills works, but separate layers per object give you more control.
- Tap the + button to add a new layer directly above the flat color layer.
- Tap the new layer and choose Clipping Mask. A small arrow appears, showing it's attached to the layer below.
- Paint freely. Anything that crosses the edge of the shape underneath disappears.
The advantage of clipping masks is that the paint stays on its own layer. You can change the blend mode, lower the opacity, or delete the layer entirely without touching the base color. If you want a different color for the base later, the clipped layers follow along.
The tradeoff is organization. Clipped layers stack up fast, so name your groups and keep one clipped layer per job (shadow, highlight, texture).
Method 3: Alpha Lock for quick, single-layer coloring
Alpha Lock protects the transparent pixels on a layer, so you can only paint where something already exists.
- Select the layer with your flat color or shape.
- Open the layer menu and tap Alpha Lock. You can also swipe left on the layer, which is a faster gesture once you're used to it.
- Choose a brush and paint. Strokes stay within the existing pixels.
Alpha Lock is fast and has no extra layers to manage. The downside is that the color is baked into that layer. Once you paint shading on it, you can't remove the shading without affecting the base color. Use it when you're working quickly or finishing a piece that won't change.
Alpha Lock is also the cleanest way to recolor line art after the fact. Lock the line layer, choose a new color, tap the layer, and select Fill Layer. Every pixel of the lines changes color with no black fringe left behind. While the lock is on, you can also paint multiple colors into the lines, and the strokes stay confined to them.
Method 4: Selection tool for one-off areas
When you don't want to build fills first, selection will do the same job.
- Set your line art as Reference, then select a new empty layer.
- Open the Selection tool and set the mode to Automatic.
- Tap inside the area you want to color.
- Paint on the new layer. Your brush only applies inside the marching-ants selection.
This method works well for pieces with irregular, painterly areas where you want a boundary only for a moment. The selection disappears when you tap away from it, so it isn't a permanent edit. If you'll return to the same area repeatedly, build a flat fill and clip to it instead.
There's also a cut-and-paste variation. Select an area, then copy or cut the pixels onto a new layer. That layer becomes an independent cutout of the shape, ready to recolor or move.
Using Multiply to keep lines visible
If you paint directly over line art rather than below it, switch the paint layer's blend mode to Multiply. Tap the N on the layer, choose Multiply, and the dark lines show through the color. This is the traditional marker look, and it suits loose sketches where perfect containment isn't the goal. For precise work, stick to the fill-below-lines setup.
Fixing common problems
- Color leaks everywhere. There's a gap in your line art. Zoom in, find it, and close it on the line layer, or lower the ColorDrop threshold.
- A white or light halo appears around lines. The fill stops before reaching the anti-aliased edge. Increase the threshold, or fill on a layer below the lines and let the outline overlap the edge.
- Clipped paint isn't showing. Make sure the layer below has actual pixels where you're painting. A clipping mask can't show color over empty areas.
- Strokes don't stay inside the selection. Check that you're painting on the intended layer and that the selection is still active.
- Wobbly edges on hand-filled shapes. Use stabilization in the brush settings, or use ColorDrop for the base and save hand painting for the interior.
Which method should you use?
Most finished pieces combine these. A common setup is ColorDrop for flat bases, clipping masks for shadow and light, and Alpha Lock for recoloring the line layer.
Taking Procreate Pocket art into a motion pipeline
If you're building character art, textures, or animatic frames in Pocket for use in After Effects or other tools, your layer structure matters more than it does for a static illustration.
- Export layered files. Export so line art, flats, and clipped shading arrive as separate layers. Check that blend modes and clipping behave as expected after import, since they can change between apps.
- Keep flats separate from shading. That separation lets you animate, recolor, or relight parts in compositing without repainting.
- Name layers early. Files with dozens of unlabeled layers slow down any handoff.
Where motion tools fit after the drawing is done
Procreate Pocket is good for hand-drawn source art, but animating it frame by frame on a phone is slow. AI video and motion tools can pick up where the drawing ends, using your colored art as a reference for the look. They don't replace the coloring work above. They just give you a way to move that artwork into motion while keeping control of the look.
Quick workflow summary
- Draw clean, closed line art on its own layer.
- Set it as Reference.
- Fill flat colors with ColorDrop on a layer underneath.
- Add clipping-mask layers for shadows, highlights, and texture.
- Use Alpha Lock when you need to recolor lines or finish a layer quickly.
- Export a layered file for After Effects or other tools.
Once you have this layer structure down, coloring inside the lines becomes a matter of picking the right tool for each area, and your files stay clean enough to hand off to compositing.