How to Color in Procreate
StyleFrame Team8 min read
To color in Procreate, put your line art on its own layer, create a new layer beneath it, and fill flat color with ColorDrop by dragging the color swatch from the top right into a closed shape. Then add shading on separate layers above, using Clipping Mask or Alpha Lock and blend modes like Multiply, and refine the result with Adjustments (Hue, Saturation, Brightness, Color Balance, and Curves). Keeping flats, shadows, highlights, and line art on separate layers lets you recolor or export any piece later without repainting.
Set up your canvas and line art
Start with a new canvas sized for where the artwork will end up. If it's headed into a video timeline, create it at your delivery resolution (or a clean multiple of it) so you don't scale pixels later. Work at the largest size your iPad handles comfortably, since you can always scale down.
Bring your sketch in one of two ways:
- Drawn in Procreate: Copy the sketch layer, then paste it into the new canvas from the Actions menu's Add section.
- Drawn on paper: Use Add → Take a Photo, or insert a scan. Light it evenly, because shadows in the photo become gray smudges you have to clean up.
For a photographed sketch, remove the paper tone. Open Adjustments → Hue, Saturation, Brightness and drop saturation to zero. Then open Curves and drag the white point inward until the paper goes white and the pencil lines stay dark. Erase any leftover edge shadows with a soft eraser.
Set the line layer to Multiply. White paper then disappears and anything painted underneath shows through the lines. Lock or rename this layer so you don't paint on it by accident.
Choose colors with the Color panel
Tap the color swatch in the top right to open the Colors panel. It has five modes along the bottom:
- Disc: an outer hue ring around an inner saturation disc. This is the default and the fastest for intuitive picking.
- Classic: Hue, Saturation, and Brightness sliders with a square picker.
- Harmony: suggests related colors based on your current selection, which helps when you don't want to build a scheme from nothing.
- Value: precise sliders plus numeric and hex input, useful when you must match a brand color or a hex value from a style guide.
- Palettes: swatch sets. Procreate includes several, and you can import or build your own.
Two small features save time. The History strip keeps your last ten colors, so you can step back to a recent shade. The panel also holds a primary and secondary color, which matters for color dynamics on certain brushes.
If you work on a project with a fixed palette, create a palette from your brand or storyboard colors and keep it active. Sampling from swatches is more consistent than eyeballing every pick.
Block in flat colors
Flat color first, detail second. Block in the big shapes before shading anything.
- Create a new layer below your line art for each major element (background, skin, clothing, hair, props).
- Pick a color, then drag the color swatch from the top right into a closed shape. This is ColorDrop.
- Keep holding after the fill appears and slide left or right to adjust the threshold. Lower values fill less and stay tighter to edges; higher values push the fill into the lines.
- Lift your pencil or finger to commit. Tap Continue Filling to fill more areas with taps.
If a fill leaks, the usual cause is a gap in the line art. Close the gap with a brush stroke on the line layer, or raise the threshold slightly so the fill tucks under the lines instead of stopping short. Because the line layer sits above, a fill that extends a bit under the line is invisible and avoids white halos.
Other ways to fill
- Selections → Color Fill: Turn on Color Fill in the Selections toolbar, choose a color, then make a selection (Automatic, Freehand, Rectangle, or Ellipse). The selection fills the moment you complete it. It works on a single layer, not a layer group, and the setting persists, so switch it off when you're done.
- Fill Layer: Tap a layer to open its options and choose Fill Layer to flood the entire layer with the current color. This works well for backgrounds.
- Recolor: An older tool that's available through QuickMenu, which is off by default. Enable it under Actions → Prefs → Gesture Controls → QuickMenu, assign Recolor to a radial slot, and tap areas to fill. The Flood slider controls how aggressive it is.
Use ColorDrop for most work, Selections when you need an exact boundary or a feathered edge, and Fill Layer for solid backgrounds.
Keep colors inside the shapes
Once a flat shape exists, you want to paint on it without spilling outside the edges. There are two ways to do that:
- Alpha Lock: Two-finger swipe right on a layer (or use the layer menu). Paint only affects pixels that already exist, so the silhouette stays intact. It's quick, but it's destructive to the base color.
- Clipping Mask: Add a new layer above the flat shape and choose Clipping Mask. Everything you paint on it is confined to the shape below. This is non-destructive, because you can delete or hide the shading layer and the flat color stays untouched.
For anything you might revise, use clipping masks. The extra layers cost little and make client changes painless.
Add shading and light
Put shadows and highlights on their own clipped layers rather than painting into the flats.
- Shadows: Add a layer above the flat color, clip it, set it to Multiply, and paint with a desaturated, slightly cool or warm tone. Multiply darkens while letting the base hue show through, which keeps shadows colorful instead of muddy gray.
- Highlights: Use a new clipped layer set to Add, Screen, or Overlay depending on how strong you want the effect. Keep opacity low and build up.
- Texture: A textured brush set to low opacity builds density as strokes overlap, which gives variation without much effort.
If shading is your weak spot, find a reference photo and think in planes: which surfaces face the light, which turn away. A rough grayscale value pass on one layer, set to Multiply over your colors, is another reliable method. You get the lighting structure right in black and white first, then color underneath.
To stop black lines from feeling harsh, tint them. Duplicate the line layer, lock it, and use Curves on individual channels to shift the line toward a warm brown or deep red. Colored line art blends with the fills and reads more painterly.
Adjust color after the fact
Adjustments apply to the active layer, so keeping elements separate pays off here. Tap the Adjustments icon:
- Hue, Saturation, Brightness: The quickest way to shift a layer's overall color, such as turning a red jacket blue.
- Color Balance: Separate RGB sliders for shadows, midtones, and highlights. Midtones are selected by default and give the most even shift. Use it to push a scene warm or cool.
- Curves: The most precise tool, with a histogram and per-channel control for contrast and tonal color.
Apply them to the whole artwork by merging a copy of all layers on top, or by using layer-level adjustments on the individual elements. In both cases, work on duplicates so you can go back.
Prepare Procreate art for motion and compositing
If your Procreate artwork is going into an After Effects, Premiere Pro, Blender, or Nuke project, the way you organize layers decides how useful it is later.
- Name and group layers by what will move. Separate limbs, props, background, foreground, and effects so each can be animated independently.
- Export as PSD to keep layers. Many compositing apps can import layered PSDs, so your flats, shading, and line art can arrive ready to parent and animate. Check that blend modes carried over as you expect; they can differ slightly between apps.
- Export PNG for flattened stills or when you need transparency on a single asset.
- Hide the paper background before exporting so you get true alpha instead of a white layer.
- Paint slightly past edges on elements that will move. If a character's arm rotates, the hidden part of the shoulder should already exist.
- Work in a color-managed way. Match your canvas color profile to your project's working space and check results on a calibrated display before final delivery.
Where Styleframe fits after you've colored
Once you have colored artwork, you may want to extend it into motion or explore alternate looks without redrawing every frame. is an AI video and motion tool you can look into for that stage of the process. Your compositing pipeline stays as it is; any tool at this stage supplies material to composite.
Quick workflow summary
- Create the canvas at delivery resolution and import or draw the sketch.
- Clean the line art and set it to Multiply.
- Pick colors in the Colors panel, ideally from a saved palette.
- Block in flats on separate layers beneath the lines with ColorDrop.
- Clip shading and highlight layers above each flat shape.
- Refine with HSB, Color Balance, and Curves.
- Name your layers, hide the background, and export a PSD or PNG for your motion pipeline.
Coloring in Procreate is mostly layer discipline: flats first, clipped shading second, adjustments last. Keep each element on its own layer, and the artwork stays easy to revise, easy to recolor, and ready to animate.