How to Change Your Dpi Settings Procreate
StyleFrame Team8 min read
To change DPI in Procreate, open the Actions menu (wrench icon), choose Canvas, tap Crop & Resize, then tap Settings and edit the DPI value. Leave Resample Canvas off if you want to keep your pixel dimensions, because the physical print size will change while the pixels stay the same. Turn it on only when you deliberately want Procreate to add or remove pixels, which can reduce your available layer count.
What DPI Actually Does in Procreate
DPI (dots per inch) describes how many pixels are laid across one inch of a printed output. It does not change how many pixels your canvas contains. A 2000 × 2000 px canvas at 132 DPI and the same canvas at 300 DPI hold identical pixel data. The only difference is the size at which they print at 100%.
The relationship is simple:
Canvas size in inches × DPI = canvas size in pixels
Set any two and the third follows. This is why DPI matters in Procreate in one situation and barely at all in another:
- You create a canvas in pixels. DPI is just metadata. It sets the default physical print size and has no effect on what you see on screen.
- You create a canvas in inches or millimeters. DPI now determines the pixel count. An A4 canvas at 300 DPI has far more pixels than the same A4 canvas at 72 DPI, and that affects both detail and memory use.
If your work ends up on screen, in a video timeline or in a composite, the pixel width and height are what you should care about. DPI only becomes critical when something is going to paper, fabric or another physical surface.
How to Change DPI on an Existing Canvas
Procreate has supported editing DPI on existing artwork since version 4.2. Older advice that says it's impossible is outdated.
- Open your artwork.
- Tap the Actions menu (wrench icon).
- Go to Canvas and tap Crop & Resize.
- Tap Settings in the panel that appears.
- Tap the DPI field and enter your new value.
- Tap Done, then Done again to apply.
Check your current values first
Before changing anything, go to Actions → Canvas → Canvas information → Dimensions. You'll see the pixel width and height, physical width and height, and the current DPI. Check it again afterward to confirm the result is what you wanted.
Resample on versus off
The Resample Canvas toggle decides what happens to your pixels:
- Resample off. The pixel dimensions stay fixed. Raising DPI makes the physical width and height smaller. Lowering DPI makes them larger. Nothing is interpolated, so image quality is untouched. This is usually what you want when you simply need the file to be tagged at 300 DPI.
- Resample on. Changing DPI or physical size recalculates the pixel dimensions. Increasing DPI this way upscales the canvas, and Procreate has to invent pixels from the existing ones. Some artwork survives that better than others, and fine linework can pick up artifacts.
Resampling also has a hidden cost. Procreate's maximum layer count depends on canvas size in pixels. In one walkthrough, pushing a canvas from roughly 1,200 px to 3,000 px dropped the available layers from around 300 to around 50. If you resample upward on a layered illustration, check your layer allowance before you commit.
Method Two: Rebuild the Canvas and Move Layers
If you want a clean, predictable result, or you need to change DPI and keep a specific pixel size, you can create a new canvas and transfer the layers.
- Note the pixel width and height from Canvas information.
- In the Gallery, tap + and then the custom canvas option.
- Enter the same pixel dimensions and set the DPI you need (for example, 300).
- Return to the original artwork and open the Layers panel.
- Swipe right to select individual layers. Groups can't be dragged across as groups, so you select the layers themselves.
- Drag the selected layers to the Gallery, hold, and tap the new canvas with your other hand. Then drop them into its layer stack.
Be aware of the tradeoffs. Layer types may not carry over exactly, so you may need to regroup layers and reapply settings. Text layers are rasterized in the transfer, so you'd need to retype any live text. When the new canvas has the same pixel dimensions as the old one, layers fill it without distortion.
Setting DPI Correctly From the Start
Changing DPI after the fact is possible, but it's cleaner to decide up front if print is even a possibility.
- Procreate's preset canvases range from 132 to 400 DPI depending on the preset.
- A custom canvas lets you pick units (such as pixels, inches or millimeters), width, height and DPI.
- A higher DPI at a fixed physical size means more pixels, which means fewer layers.
- Your device determines the largest canvas you can create, so older iPads cap out sooner.
One practical approach: work at the largest pixel size your device and layer needs comfortably allow, then set DPI according to the print size. Extra pixel headroom gives you room to scale down later without flaws showing.
Choosing the Right DPI for the Output
The right number depends on print size, viewing distance and material:
The general rule: the farther the viewer, the fewer dots you need. When in doubt, a higher DPI is safer than one that's too low. If the work is going to a professional printer or publisher, ask for their spec before you finalize. Many can also re-tag a file for you, but it's better to hand over a file that already meets their requirements.
Exporting After You Change DPI
A few export habits help the DPI survive the trip:
- Prefer PDF for print handoff when the recipient needs reliable physical sizing, since PNG is a stripped-down format that may not carry print-size information consistently.
- Avoid routing files through email or the Photos app for print deliveries, as the format can be altered along the way.
- Export PSD if you need to edit resolution elsewhere. Photoshop and Affinity Photo can both change DPI. In Photoshop, keep Resample off when you only want to change the tag. With Resample on, you're upscaling and will lose some quality.
Why Motion and VFX Artists Should Care Less About DPI and More About Pixels
If you're bringing Procreate artwork into a motion pipeline, such as hand-drawn textures, storyboards, character sheets or style frames, DPI is mostly irrelevant. Video and compositing apps generally size imagery by pixel dimensions. A 4000 × 2250 PNG is the same asset whether it's tagged at 72 or 300 DPI. What matters is whether the canvas is large enough for the comp.
Practical checks for motion work:
- Match or exceed your delivery resolution. For a UHD comp (3840 × 2160), draw at that size or larger if you plan to push in on the art.
- Plan for camera moves. If you'll scale or pan across an illustration, build in extra pixels so you're not scaling past 100%.
- Mind the layer cap. A large canvas reduces your layer count in Procreate, so you may need to split a complex piece across several files and reassemble in After Effects.
- Export in a layered-friendly format like PSD when you need to separate elements for parallax or animation, and PNG when you only need flattened frames.
- Ignore DPI for compositing. If an app displays a different physical size on import, check the pixel dimensions and scale from there.
Quick Troubleshooting
My DPI changed but my image looks the same. That's expected with Resample off. Only the print size metadata changed.
My layers disappeared after I changed the canvas. Resampling to a larger pixel size lowers the maximum layer count. Undo, then try with Resample off or work at a smaller pixel size.
My file still prints at the wrong size. Check Canvas information for the physical dimensions, and consider exporting a PDF. If the file passed through email or Photos, the metadata may have been altered.
The artwork looks pixelated when printed. You may not have enough pixels for the print size. Use the formula to work out the pixel dimensions you need (inches × DPI), and rebuild or resample accordingly.
I only need a 300 DPI tag, not more pixels. Change DPI in Crop & Resize → Settings with Resample off. Pixel quality stays identical.
Summary
To change DPI in Procreate, use Actions → Canvas → Crop & Resize → Settings, and decide deliberately whether Resample is on or off. Treat DPI as a print instruction, and pixel dimensions as the real measure of quality. For anything headed to a timeline or compositor, set your canvas by pixels, give yourself headroom for camera moves, and export in a format that matches the next stage of the pipeline.