How to Change the Dpi of a Canvas on Procreate
StyleFrame Team7 min read
To change the DPI of an existing Procreate canvas, tap Actions (wrench icon) → Canvas → Crop and Resize → Settings, then enter a new value in the DPI field. With Resample off, the pixel dimensions stay the same and only the physical print size changes. With Resample on, Procreate rescales the image to match the new DPI, which changes the pixel count and can reduce your available layers. To set DPI when starting fresh, tap the plus button in the Gallery and use a custom canvas.
Step-by-step: change DPI on an existing canvas
- Open the artwork you want to change.
- Tap the Actions icon (the wrench).
- Go to the Canvas tab.
- Tap Crop and Resize. A grid overlay appears on your canvas.
- Tap Settings.
- Tap the DPI field and type the value you need, such as 300.
- Decide whether Resample Canvas should be on or off (more on this below).
- Tap Done twice to apply the change and return to the canvas.
To confirm it worked, go to Actions → Canvas → Canvas information → Dimensions. You'll see the pixel width and height, the physical width and height, and the DPI together. Check this before and after so you know exactly what changed.
What DPI actually changes
DPI means dots per inch. It describes how many pixels are packed into each inch of a printed image. It is not a quality setting baked into the pixels themselves.
Three values are linked:
Physical size (inches) × DPI = pixel dimensions
Set any two and the third follows. A canvas that is 2000 × 2000 pixels is 2000 × 2000 pixels at 132 DPI and at 300 DPI. What changes is how large it prints at 100% scale: about 15 inches square at 132 DPI, about 6.7 inches square at 300 DPI.
This explains the most common confusion. If you created a canvas at 132 DPI and a publisher asks for 300, you don't necessarily have a quality problem. You have a pixel-count question: do you have enough pixels for the print size they want? A 3000-pixel-wide image supports a 10-inch print at 300 DPI. If your canvas has fewer pixels than the target size demands, changing the DPI number won't create detail that isn't there.
Resample on vs. off
This toggle decides whether the DPI change is harmless or destructive.
Resample off (metadata-style change)
- Pixel dimensions stay exactly the same.
- Raising DPI shrinks the physical size. Lowering DPI enlarges it.
- Your layers, strokes, and detail are untouched.
- Layer limits don't change.
Use this when you already have enough pixels and just need the file to declare the right print resolution.
Resample on (actual rescaling)
- Procreate recalculates the pixel dimensions to hold the physical size while the DPI changes.
- Raising DPI upscales the image, so new pixels are interpolated rather than drawn.
- Lowering DPI downsamples and discards pixel data.
- Your maximum layer count changes with the new pixel dimensions.
Use this only when you deliberately want a different pixel size. Upscaling with Resample can introduce softness or artifacts. If you need to go up significantly, it's better to rebuild or upscale in a tool designed for it, and keep a copy of the original.
Duplicate your artwork first. Duplicate the piece in the Gallery before you start. Resampling can't always be cleanly reversed, so work on the copy.
Choosing the right DPI and pixel size
Procreate's own guidance is that 300 DPI is the standard for print and 72–144 is typical for screen viewing. The right number depends on viewing distance and material.
If you're working with a professional printer, ask for their specs. They often specify final pixel dimensions or physical size at a given DPI, and many can handle conversions on their end.
Procreate's preset canvases range roughly from 132 to 400 DPI. If you create a custom canvas, you can enter dimensions and DPI up front. This is the cleanest route when you know the output.
Plan around layer limits
Procreate limits layers based on canvas pixel dimensions and your iPad's memory. A bigger canvas means fewer layers. This is the real cost of raising DPI with Resample on.
In one walkthrough of the process, a canvas that was upsized to roughly 3000 pixels wide dropped from about 300 available layers to about 52. Your numbers will differ by device and canvas, but the pattern holds. Before you resample up, check how many layers you currently use. If your file has more layers than the new canvas allows, Procreate can't hold them all, so merge or flatten some groups first, or keep the original resolution and handle resizing elsewhere.
The Crop and Resize screen shows a live readout of how many layers the new size permits, so you can see the trade-off before you commit.
Older versions and the rebuild workaround
DPI editing on existing canvases arrived in Procreate 4.2. If you're on a much older version, or you want a clean slate for another reason, use this approach:
- Note the pixel width and height of your current canvas (Canvas information → Dimensions).
- In the Gallery, tap + and create a custom canvas with the same pixel dimensions and your target DPI.
- Open the original, then drag layers one at a time into the new canvas by holding a layer, dragging it to the Gallery, and dropping it onto the new canvas with another finger. Groups can't be moved as groups, so select the individual layers.
- Rebuild any groups, restore blend modes and layer settings, and re-do text layers. Text becomes rasterized when moved this way.
Alternatively, export as PSD and change the resolution in an image editor. Turn off resampling there if you only want to change the DPI tag rather than the pixel count.
Does DPI matter in a motion pipeline?
For most video work, not much. Video and compositing software generally works primarily from pixel dimensions. A 3840 × 2160 PNG is 3840 × 2160 regardless of its DPI tag. Comp size, texture resolution, and render output are all set in pixels.
DPI becomes relevant when:
- Print deliverables come out of a motion project. Posters, key art, and title cards for a client may need specific physical size at 300 DPI.
- You're moving art between print-oriented tools. Some applications read DPI metadata when placing an image, which affects its default size.
- Storyboards and styleframes are exported for decks or print. Setting the right DPI up front saves resizing later.
For video, the practical question is simpler: is the canvas big enough? If you're painting a styleframe or texture in Procreate for a 4K comp, make the canvas at least 3840 × 2160, and consider larger if you plan to punch in or animate camera moves across it. Whether it says 132 or 300 DPI is irrelevant to the comp.
Common mistakes to avoid
- Treating DPI as a quality knob. Changing 132 to 300 with Resample off doesn't add detail. It only changes the print size the file declares.
- Resampling up on your only copy. Duplicate first.
- Ignoring the layer readout. Upsizing can silently cap your layers.
- Forgetting the unit. If your canvas is set in inches or millimeters, the crop readouts use those units, and DPI directly determines pixel count.
- Exporting without checking. After changing DPI, confirm in Canvas information, then export as PNG or PSD. If a printer needs the DPI tag preserved, ask them which format they prefer. PDF is often safest for print.
Quick answers
Can I change DPI after creating a canvas? Yes, in current versions of Procreate, through Actions → Canvas → Crop and Resize → Settings.
Will changing DPI make my art blurry? Not with Resample off. With Resample on, upscaling can soften detail.
Why did my physical size change? Because pixels stay fixed when Resample is off. Higher DPI means a smaller print size, and lower DPI means a larger one.
What DPI should I use for After Effects? Pixel dimensions matter more than DPI. Match the canvas to your comp resolution, with extra headroom if you plan to scale or move the camera.
Set DPI and pixel dimensions before you start painting whenever you can. When you can't, the Crop and Resize settings let you fix it, as long as you understand what Resample does to your pixels.