How to Change the Color of a Layer in Procreate
StyleFrame Team8 min read
To change the color of a layer in Procreate, turn on Alpha Lock for the layer, pick a new color, then tap the layer thumbnail and choose Fill Layer. This recolors every pixel on the layer and keeps the edges clean. If you need to shift hue or tone and keep the shading, use Adjustments > Hue, Saturation, Brightness on the selected layer instead. For selective changes, clip a new layer set to the Color blend mode, or use the Recolor tool from the Quick Menu.
Which method should you use?
Procreate has no single "layer color" control, so the right method depends on what's on the layer.
If you come from After Effects, think of these as destructive (Fill Layer, Recolor) versus non-destructive (a clipped blend layer). Decide before you commit.
Method 1: Alpha Lock and Fill Layer
This is the cleanest option for line art, lettering, silhouettes, and any layer that is one color. Alpha Lock works like "preserve transparency" in other apps: only pixels that already exist can be changed.
- Select the layer in the Layers panel.
- Turn on Alpha Lock. Swipe right on the layer with two fingers, or tap the layer and choose Alpha Lock. The thumbnail shows a checkerboard when it's active.
- Choose your new color in the color panel.
- Tap the layer thumbnail and choose Fill Layer.
The whole layer takes the new color, and anti-aliased edges keep their original transparency, so you avoid the jagged fringing you get when you recolor letter by letter with the Selection tool.
You can also skip Fill Layer and paint over the locked layer with a large soft or hard brush. Only the existing pixels accept paint. That's useful for gradients or partial recolors, but Fill Layer is faster and uniform.
Remember to turn Alpha Lock off afterward. Otherwise new strokes seem to "not draw" anywhere that was transparent, a common source of confusion.
Method 2: Hue, Saturation, Brightness
When the layer contains shading, texture, or multiple colors, a fill would flatten everything. Adjustments shifts the colors while keeping value relationships.
- Select the target layer.
- Open the Adjustments menu (the magic wand icon).
- Tap Hue, Saturation, Brightness.
- Drag along the layer, or use the sliders, to move Hue until the color is right, then fine-tune Saturation and Brightness.
Related tools in the same menu:
- Color Balance is another way to shift the colors on a layer.
- Curves adjusts contrast and brightness. It's handy when art made on a bright, dark-mode iPad screen looks muddy elsewhere.
Because these edit pixels, duplicate the layer first if you might want the original back.
Method 3: Clipping mask with a Color blend mode
This is the closest Procreate gets to a non-destructive recolor, and it's the best choice when you want to keep the original layer untouched.
- Create a new layer directly above the one you want to recolor.
- Tap the new layer and choose Clipping Mask. It now affects only the pixels of the layer below.
- Set the new layer's blend mode to Color.
- Paint with any color. The hue and saturation change while the underlying luminance stays intact.
Because it's a separate layer, you can lower its opacity, hide it, change its color later, or try other blend modes such as Multiply, Overlay, or Soft Light for different looks. It also lets you recolor one region, such as a character's jacket, without selecting anything precisely.
One caution: Color mode keeps the luminance of the layer below, so very dark or very light areas won't reach a fully saturated target. Black stays black. For that case, use Fill Layer or invert first.
Method 4: The Recolor tool
Recolor changes the color of an object on the active layer and is especially good for textured or painterly art where a fill would flatten the surface. In current versions it's not in the Adjustments menu. You reach it from the Quick Menu.
Set up the Quick Menu
- Open Actions (the wrench) > Preferences > Gesture Controls.
- Choose Quick Menu and assign a gesture, such as the sidebar square.
- Tap and hold one of the Quick Menu buttons and pick Recolor from the list.
Use it
- Select the layer that contains the object.
- Pick the new color.
- Open the Quick Menu and tap Recolor. A small crosshair appears.
- Drag the crosshair onto the object you want to change. You'll see a live preview, and tapping the color panel while it's active previews other colors.
- Tap to commit the change.
If the whole background flips color, the crosshair is probably sitting outside the object. Move it onto the shape. If the result leaves gaps in textured areas, raise the Flood threshold slider at the bottom of the screen.
Recolor works on the active layer only, which is why it can seem to recolor "the whole canvas" when a layer is full of elements. Keeping elements on separate layers makes it far more predictable.
Quick alternatives
ColorDrop. Drag the color from the active color dot at the top right onto an area, and release without pausing. It fills the enclosed shape. It's quick for single objects, but it recolors one region at a time, so it's not suited to changing everything on a layer.
Invert. To flip black art to white, use the layer's Invert option. This swaps every color on the layer to its opposite, which is fine for monochrome line work but will scramble colored art.
Recoloring line art that's merged with fills
If outlines and color share one layer, you can't Alpha Lock your way to a clean result. Instead:
- Use the Selection tool in Automatic mode, with a fill color that differs from the line color, to select the outlines.
- Copy the selection and paste it to a new layer, so the lines sit separately above the artwork.
- Alpha Lock the new layer, choose the new color, and Fill Layer.
You'll probably need to hide or clear the original lines underneath. The cleaner habit is to keep line art on its own layer from the start, so recolors are a two-step operation later.
Common mistakes
- Wrong layer active. Nearly every "it recolored everything" complaint comes from an unintended active layer or an out-of-place Recolor crosshair.
- Forgetting Alpha Lock. Without it, Fill Layer paints the entire layer, including transparent areas.
- Flattening shading. Fill Layer replaces all values with one color. Use HSB or a Color-mode clip if shading matters.
- Editing destructively. Duplicate the layer before applying Adjustments or Recolor.
- Too many elements on one layer. The more you separate, the more flexible every recolor becomes.
Taking recolored layers into an After Effects pipeline
If your Procreate art feeds motion work, a few habits save headaches later:
- Keep layers separate when you export, or export PNGs with transparency for individual elements. Check that blend modes like Color survived the round trip; if not, merge the clipped recolor into its layer before export.
- Do final color decisions where they're cheapest to change. You can leave Procreate art close to neutral and make color adjustments later in your compositing app.
- Watch edges. Recoloring with Fill Layer on an alpha-locked layer keeps clean edges, whereas selection-based recolors can leave funny edges.
When a recolor isn't enough
Recoloring a layer handles one asset. It doesn't help when you need an entire sequence of frames to take on a different look, or when you want to push boards and style frames toward a new visual treatment. That's the kind of job where a separate tool such as can sit next to Procreate rather than replacing it, with your Procreate frames serving as reference material.
FAQ
Can I change the color of a layer without affecting transparency? Yes. Use Alpha Lock and Fill Layer, or a clipped layer in Color mode. Both leave transparent pixels transparent.
Why did the whole canvas change when I used Recolor? Recolor affects the active layer. If the crosshair lands on a large background area of that layer, it fills that area. Move the crosshair onto your object or isolate the object on its own layer.
What's the fastest way to turn black line art white? Invert the layer from its options menu, or Alpha Lock the layer and Fill Layer with white.
Is there a non-destructive way to recolor in Procreate? Clipping a layer with the Color blend mode is the closest option. For truly live, adjustable color changes, do the grade later in your compositing app.