How to Change Size of Image in Procreate
StyleFrame Team8 min read
To change the size of an image in Procreate, you have two options. For the whole canvas, open Actions (wrench icon) > Canvas > Crop and Resize, turn on Resample Canvas, and enter new dimensions. For a single image or layer, select it, tap the Transform arrow, and drag the corners or use Uniform to scale it proportionally. Set the Interpolation option to Bicubic and make all your scaling changes in one pass to keep the result sharp.
Canvas Size vs. Image Size: Know Which One You Need
Procreate separates two operations that most editors lump together.
- Canvas resizing (Crop and Resize) changes the dimensions of the entire document, including every layer. Use it when the final output needs a different pixel size or aspect ratio.
- Image or layer resizing (Transform) scales one layer or selection inside a canvas that stays the same size. Use it when you've imported a photo or reference and want it to fit the composition.
Confusing the two is the most common reason people end up with cropped artwork or a soft-looking image. Decide which job you're doing before you touch a slider.
How to Resize the Canvas with Crop and Resize
- Duplicate your project first. In the Gallery, duplicate the artwork. Crop and Resize is destructive once you tap Done, and a copy gives you an easy way back.
- Tap Actions (wrench icon), then Canvas, then Crop and Resize.
- Drag the grid handles to crop or extend the canvas, or drag inside the grid to reposition it. A notice shows how many layers remain available at the new size.
- Tap Settings to type exact values.
- Tap Done to commit the change. Use Reset to start over before committing.
Resample Canvas: The Setting That Changes Everything
Resample Canvas decides whether Procreate scales your pixels or only changes the frame around them.
- Resample on: the width and height values are chained together (the link icon turns blue). Change one value and the other updates to preserve the aspect ratio. Procreate adds or removes pixels so the artwork scales with the canvas.
- Resample off: you're changing the canvas bounds, not rescaling the content. Making the canvas smaller crops the artwork, and making it larger adds empty space.
A habit that avoids trouble is to turn Resample Canvas on before typing any numbers. Some users have reported that switching it on after entering dimensions produced a crop instead of a resize. If you need an exact non-proportional size, such as 1000 × 1205 to 1000 × 1200, expect the linked value to shift. Resize proportionally first, then crop the small remainder with Resample off.
Units, DPI, and Rotation
Dimensions can be shown in pixels, inches, millimeters, or centimeters. If the document was created in inches, the sliders and number pad work in inches. DPI sits beneath the dimensions. For print work, 300 DPI is the standard target. For screen-only work DPI is mostly irrelevant, because pixel dimensions are what matter.
The same panel offers rotation up to 45 degrees in either direction. Any canvas corners that fall outside the grid after rotation are cropped away. Snapping helps you align the grid to the center or edges of the artwork.
Canvas Size Limits
Procreate's maximum canvas size depends on your iPad's memory, and as the canvas grows, the number of layers you can use shrinks. If a large print size at 300 DPI won't create or resize, you have three choices:
- Lower the DPI slightly (many printers tolerate this, depending on viewing distance).
- Reduce your layer count by merging or flattening finished sections.
- Work at a smaller size and upscale in another tool.
How to Resize an Image or Layer with Transform
When you import a photo or paste in an element, you're scaling a layer, not the canvas.
- Select the layer in the Layers panel.
- Tap the Transform tool (the arrow icon in the top toolbar).
- Pick a mode at the bottom: Uniform keeps proportions, Freeform stretches independently, Distort and Warp bend the shape.
- Drag a corner handle to scale, or drag inside the bounding box to move.
- Tap Transform again (or choose another tool) to commit.
If you only want part of a layer, make a selection first, and Transform will apply to that selection only.
Choose the Right Interpolation
At the bottom of the Transform toolbar is an Interpolation setting. It controls how Procreate calculates new pixels when scaling:
- Bilinear is typically the default and is fine for quick adjustments.
- Bicubic usually gives the smoothest results for soft edges, gradients, photography, and fine detail. It's the better default for most scaling.
- Nearest Neighbor keeps hard pixel edges. It suits very crisp line work but can look jagged on anything else.
Resize Multiple Layers at Once
Procreate won't scale every layer with a single canvas-wide command unless you use Crop and Resize. To scale a stack of layers within the canvas:
- Open the Layers panel.
- Swipe right on each layer you want to include. One becomes the primary layer, and the rest are secondary.
- Tap Transform. Everything moves and scales together.
Keeping Resized Images Sharp
Every Transform commit resamples the pixels. Scale a layer three times, and you've degraded it three times. A few habits prevent most of the blur:
- Resize once. Get the size and position right in a single transform rather than nudging repeatedly. If you're unsure, duplicate the layer before experimenting.
- Start high-resolution. Scaling down is forgiving. Scaling up never invents real detail, so small screenshots and social-media thumbnails won't hold up.
- Check at 100%. Zoomed-in views can look soft or pixelated even when the actual output is fine. Pinch back to 100% to judge how the export will look.
- Rotate sparingly. Rotating selections can introduce softness. Do your rotation and scaling in one combined transform when possible.
- Set the canvas big enough from the start. A small canvas at low DPI will look soft no matter how good the source image is.
The Copy-and-Paste Pitfall
Pasting artwork from one Procreate canvas into another doesn't always preserve a 1:1 pixel relationship, so pasted content can arrive at an unexpected size and look soft once you adjust it. A more reliable approach is to duplicate the original canvas, delete layers you don't need, and run Crop and Resize on the duplicate. The pixels stay as you created them, and you avoid pasting altogether.
Sizing Procreate Artwork for Motion and VFX Pipelines
If your Procreate art is headed into After Effects, Premiere Pro, Nuke, Cinema 4D, or Blender, think in pixels rather than inches.
- Match your comp resolution. Set the canvas unit to pixels and use the dimensions of your timeline, such as 1920 × 1080 or 3840 × 2160, or a multiple of it if you plan to push in, pan, or scale during animation.
- Build in headroom. If you'll animate camera moves or scale elements in the comp, create the art larger than the frame. Scaling up a raster layer in After Effects softens it just as it does in Procreate.
- Keep layers separate. Keep elements on separate layers when you want to animate them individually. Export PNG when you need a flat image with transparency. Resize before export so you aren't relying on downstream resampling.
- Ignore DPI for video. DPI metadata is irrelevant to a video comp. Pixel dimensions are what count.
- Watch memory. Big canvases limit your layer count. If a character sheet or texture needs both high resolution and many layers, split the work across several documents.
When Resizing Isn't Enough
Procreate's resizing tools are interpolation-based. They rearrange and recalculate the pixels you already have, so they can't recover detail that wasn't there. If a piece of artwork needs to reach 4K or beyond, or if you need to move it further into a production pipeline, a second tool helps.
This is where fits. It's an AI video and motion tool that can serve as a next step when you want to take finished Procreate artwork further, such as upscaling or animating it.
In practice, you can resize and finalize artwork in Procreate, bring it into a second tool when you need upscaling or animation, and keep compositing where you already work.
Troubleshooting Common Procreate Resize Problems
The image got cropped instead of resized. Resample Canvas was probably off, or you changed the dimensions in a way that altered the bounds. Undo, turn Resample Canvas on first, then re-enter your values.
The aspect ratio keeps shifting. With Resample on, width and height are linked. Resize proportionally, then crop the remainder with Resample off.
Pasted artwork looks pixelated. Duplicate the original canvas and use Crop and Resize on the copy instead of pasting between documents.
The canvas won't go that large. You've hit the memory-based limit. Reduce DPI, merge layers, or plan a smaller working size.
The artwork looks blurry after scaling. Switch Interpolation to Bicubic, scale in a single transform, and check at 100% zoom. If the source resolution is too low, no setting will fully fix it.
I can't change the DPI. DPI is set in the Crop and Resize settings under Canvas Dimensions. If you only need a different print size and not new pixel data, adjust it there with care.
Quick Reference
Master those few controls, and resizing in Procreate becomes predictable: duplicate first, choose canvas or layer, turn on Resample when you need scaling, pick Bicubic, and commit once.