How to Change Selected E Color on Procreate
StyleFrame Team8 min read
To change the color of a selected object or layer in Procreate, pick the layer, then use Adjustments > Hue, Saturation, Brightness for a whole-layer shift, or ColorDrop and Recolor to swap a single shape. For a flat replacement that keeps the original transparency, turn on Alpha Lock and tap Fill Layer. For a reversible change, clip a new layer above the artwork and set its blend mode to Color. The right method depends on whether you are recoloring a whole layer, a selection, or one enclosed area.
The phrase "selected e color" is ambiguous. This guide assumes you mean changing the color of whatever you have selected, or changing the active color you paint and fill with. Both are covered below, along with how to hand the result off to a motion pipeline.
Pick the Method Before You Touch the Canvas
Most frustration with recoloring in Procreate comes from using the wrong tool for the job. A quick decision guide:
Before any of these, confirm you are on the correct layer. It sounds trivial, but on a file with dozens of layers it is the most common reason a recolor "doesn't work."
Method 1: Hue, Saturation, Brightness for Whole-Layer Shifts
This is the quickest option when you want the same artwork in a different color family, such as turning a brown element green.
- Tap the layer you want to change.
- Open the Adjustments menu (the magic wand icon).
- Tap Hue, Saturation, Brightness.
- Drag the Hue slider until the color reads correctly, then tune Saturation and Brightness.
- Tap the Adjustments icon again, or tap any other tool, to commit. A two-finger tap undoes the change.
Hue moves every color on the layer together, so relationships between colors are preserved. That is useful for variants of a character or prop, but it is the wrong tool if you want only one part of the layer to change. In that case, isolate the part with a selection first, or move on to ColorDrop or Recolor.
Keep separate elements on separate layers wherever your layer limit allows. Adjustments act on the whole active layer, so a clean layer structure is what makes this method precise.
Method 2: Alpha Lock and Fill Layer for Flat Color Swaps
If you want to turn an entire layer, such as black linework or lettering, into one new color without disturbing its edges, Alpha Lock is the standard approach.
- Select your new color from the Colors icon at the top right.
- Swipe right on the layer with two fingers to enable Alpha Lock. A checkerboard pattern appears on the layer thumbnail.
- Tap the layer, then choose Fill Layer.
Every pixel on the layer takes the new color, while the original transparency is preserved. Turn Alpha Lock off when you finish. Leaving it on is a common reason later brushstrokes refuse to appear outside existing shapes.
A faster variant is to leave Alpha Lock on, choose a color, and paint over the layer. Only the pixels that already exist accept the new paint.
Method 3: ColorDrop for a Single Shape
ColorDrop works like a paint bucket you drag into place.
- Choose your new color.
- Drag from the Colors icon at the top right into the area you want to change, and keep holding.
- While holding, slide left or right to adjust the fill threshold. Left fills less, right fills more.
- Lift your Pencil or finger to commit.
Sweep straight from the color dot to the target area. If you pause on the dot, it can switch to your previous color. After a drop, you can tap Continue Filling to recolor other areas with taps, then tap the tick or switch tools to exit.
ColorDrop responds to the pixels beneath it. On a textured or gradient layer it will follow subtle tonal changes rather than producing a perfectly flat fill, which is sometimes what you want and sometimes not. If the fill leaves a halo around the edge, raise the threshold slightly.
Method 4: Recolor for Textured Layers
Recolor is a different tool from ColorDrop, and it is not on the main interface. You reach it through QuickMenu, which is off by default.
To enable it: open Actions, then Prefs, then Gesture Controls, then QuickMenu, and choose how you want to trigger it. Set one of the radial options to Recolor.
To use it:
- Select the correct layer.
- Open QuickMenu and tap Recolor.
- Choose your color from the Colors icon at the top right.
- Drag the crosshair onto the area you want to affect.
- Adjust the Flood slider if the change isn't covering everything it should.
The crosshair position matters. If the whole background changes color, the crosshair is sitting on the wrong tone. Move it onto the object. On a textured layer, the result shifts as you reposition the crosshair, so experiment until the color lands where you want it. Recolor also updates live, so changing the color in your wheel while it's active changes the selected area in real time.
Method 5: Selections and Color Fill for Hand-Picked Regions
When you need to recolor a region that no fill threshold will isolate cleanly, build the selection yourself.
- Tap Selections at the top.
- Choose a selection method from the tabs at the bottom (Automatic, Freehand, Rectangle, or Ellipse).
- Turn on Color Fill so it is highlighted blue.
- Choose your color.
- Make the selection. The color fills the area as soon as the selection completes.
Color Fill remembers its setting even after you leave Selections, so turn it off when you are finished. It also works only on a single layer, not on a group, so merge or work layer by layer. Adding a feather softens the edge if you are blending the color into the surrounding art.
Method 6: Clipping Mask for Non-Destructive Recoloring
For client work where the color will change again, a clipping mask keeps the original artwork intact.
- Create a new layer directly above the layer you want to recolor.
- Tap the new layer and choose Clipping Mask.
- Fill the new layer with your chosen color.
- Set its blend mode to Color to tint the artwork while preserving its shading, or leave it Normal for a flat color replacement.
Toggle the top layer off to see the original, or change the fill color at any time. When you are happy with the result, merge down to make it permanent. If you need only part of the artwork recolored, paint or erase on the clipping layer rather than touching the source.
This is the method most compatible with an animation or compositing mindset, because every decision stays editable.
Fine-Tuning With Color Balance and Curves
Once the new color is in, you may need to correct it.
- Color Balance splits color into RGB sliders, each opposed by its complement (cyan, magenta, yellow), and lets you target Shadows, Midtones, or Highlights separately. Midtones are selected by default and give the most even adjustment.
- Curves is the most advanced control, letting you bend the tonal line and see a histogram of where color sits in the layer.
If artwork recolored in a bright room looks flat or muddy on another screen, a gentle upward pull on Curves often restores contrast. Check your result on more than one display before locking a palette.
Common Problems and Fixes
- Whole canvas changed: you were probably on the wrong layer, or the Recolor crosshair landed on the background.
- Rough edges after recoloring: use Alpha Lock with Fill Layer, or a clipping mask, instead of manual selection fills.
- Only one letter or shape changed: ColorDrop affects one connected area at a time. Use Alpha Lock to change everything on a layer.
- Paint won't appear: Alpha Lock is still on.
- Color looks wrong after Hue shift: the whole layer moved together. Isolate the part you want first.
Taking Recolored Procreate Art Into a Motion Pipeline
For motion designers, Procreate is often where styleframes, character designs, backgrounds, and texture elements begin. A few habits make the handoff to After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke smoother:
- Keep recolorable elements on separate layers, so palette changes stay a layer-level operation.
- Prefer clipping masks over merged recolors while a palette is still under review.
- Export layered files or transparent PNGs of individual elements so you can adjust color again in your compositor.
Procreate handles the still. Where Styleframe can help is in the next step, when a finished frame needs to move or the look needs to carry across shots.
It does not replace the precise recolor work above. If you need one shape in an exact hex value, do it in Procreate. Styleframe is for carrying the look into motion.
Quick Reference
- Whole-layer hue change: Adjustments > Hue, Saturation, Brightness.
- Flat recolor of everything on a layer: Alpha Lock, then Fill Layer.
- One shape: ColorDrop, adjusting the threshold while holding.
- Textured areas: Recolor via QuickMenu, with the crosshair and Flood slider.
- Precise regions: Selections with Color Fill.
- Reversible edits: clipping mask with Color blend mode.
Menu names and locations shift slightly between Procreate versions, so if a control isn't where you expect, check the handbook for your version. The underlying methods stay the same.