How to Change Procreate to Work Vertically
StyleFrame Team8 min read
Procreate has no single "vertical mode" switch. You work vertically by using a portrait canvas, one that is taller than it is wide. Create a new canvas with a height larger than its width, or open an existing canvas and go to Actions > Canvas > Crop and Resize to change its dimensions or angle. To draw with the iPad physically upright, hold it in portrait with Orientation Lock off so the interface follows.
Canvas Orientation vs. Interface Orientation
Two different things get called "vertical" in Procreate, and mixing them up is the main reason people struggle with this.
- Canvas orientation is the shape of your artwork: portrait (taller than wide), landscape, or square. You control this in Procreate.
- Interface orientation is how the toolbars and sidebar sit relative to how you hold the iPad. This depends on iPadOS and its Orientation Lock.
If you want a 9:16 piece for a vertical video deliverable, you need the first. If you want to draw with the iPad held upright, you need the second. Often you need both.
Method 1: Start With a Portrait Canvas
The cleanest approach is to build the canvas vertically from the start.
- Open the Gallery and tap the + button to create a new canvas.
- Choose a custom canvas (the new-canvas dialog lets you enter your own dimensions).
- Enter a height greater than the width. For a standard vertical video frame, that means a 9:16 ratio such as 1080 × 1920 px. For more headroom, use a larger 9:16 size like 2160 × 3840 px.
- Set your DPI. Procreate's guidance is 72–144 DPI for screen work and 300 DPI minimum for print. DPI changes the physical size of the canvas, not the pixel dimensions, so for video it doesn't affect your frame size.
- Name the canvas and create it.
Larger canvases have a cost. Procreate shows how many layers a given canvas size allows, and hardware limits cap how large you can go. If you plan to build layered, animation-ready art, check that layer count before committing. A very large canvas with fewer available layers can be a trap for anyone who separates elements for compositing.
Method 2: Convert an Existing Landscape Canvas
If you already started in landscape, you don't have to redraw anything. Use the Crop and Resize tools.
- Tap Actions > Canvas > Crop and Resize.
- A grid overlay appears. Its edges represent the new edges of your canvas.
- Reshape it using one of the approaches below.
Numerical Crop
Tap the width or height readout in the bottom toolbar and type exact values with the keypad. Readouts use the measurement unit you chose when you created the document. This is the most precise option and the one to use when you need an exact 9:16 frame.
Uniform Crop
Tap the Aspect Lock (the chain-link between the width and height readouts) to preserve the current ratio. This is useful for scaling a canvas without distorting its shape. It won't turn landscape into portrait on its own, so turn it off or set exact values when you want to change the ratio.
Freeform Crop
Drag a side of the overlay to stretch or squash along one axis, or drag a corner to change both at once. The readouts update live as you drag. You can't pull the grid past the maximum canvas size your hardware supports.
Rotating the Canvas
The Rotation slider in the bottom toolbar adjusts the angle of your artwork relative to the crop area. If a landscape piece should simply be turned on its side, rotate it here. Check the result before you confirm.
Protect Your Original First
Crop and Resize can discard pixels that fall outside the new boundaries. Before converting a finished piece, duplicate the canvas in the Gallery and work on the copy. That keeps a safe landscape master in case the client changes their mind about format.
Method 3: Hold the iPad Vertically
If your goal is physical comfort, such as drawing with the iPad upright like a sketchbook, this part is about iPadOS settings, not Procreate settings.
- With Orientation Lock off, rotating the iPad to portrait makes the interface reorient, with the main toolbar at the top of the screen as you hold it.
- With Orientation Lock on, the interface stays fixed to whichever orientation it had when you locked it. If you lock in landscape and then turn the iPad upright, the "top" toolbar ends up running down the side.
You can toggle Orientation Lock from Control Center. If you prefer a portrait canvas and an upright iPad, create the canvas in portrait with the lock off, and the interface will stay oriented correctly.
Mirroring to a Vertical Display
Artists who draw at live events and mirror to a portrait-mounted monitor or TV run into a known limitation. Some users lock the iPad in landscape and rotate it physically so the mirrored image fills a vertical screen. As a result, the toolbars no longer reorient to match. Users on Procreate's feedback forum have requested a preference to let the toolbars ignore Orientation Lock, but this is a request, not a confirmed feature. Until that changes, the practical options are:
- Keep Orientation Lock off and let the interface rotate normally, then adjust your display or mirroring settings so the output fills the vertical screen.
- Accept the sideways toolbars when locked, and arrange your workspace so you can reach them comfortably.
- Test your exact iPad, adapter, and display combination before a live session, since mirroring behavior varies by setup.
Keeping Brushes Vertical
A different version of this question shows up with brush shapes. You might have a rectangular marker tip that should stay upright no matter which direction you stroke, but it rotates to follow your stroke direction instead. That is a brush-setting issue, not a canvas issue. Open the brush and check the Shape tab:
- Rotation slider: At 100%, the shape follows the stroke direction. Set it to 0% for a shape that stays fixed.
- Azimuth: When enabled, the brush shape rotates according to how you physically hold the Apple Pencil, and the Rotation slider has no effect. Turn Azimuth off if you want predictable, fixed shape orientation.
- Shape editor: Edit the shape itself and rotate it in 90° steps with two fingers, or use the circular graph for fine adjustments.
Also check the Properties tab for Orient to screen. This makes brush orientation relate to the screen rather than the canvas, which matters if you've rotated your canvas view.
Note that azimuth is the pencil's angle relative to the screen plane, which is different from tilt. That is why switching hands can change how a brush behaves.
Don't Confuse "Vertical" With "Flip Vertical"
Procreate's Transform tool includes Flip Vertical and Flip Horizontal. These mirror your selected content along an axis. They don't change the canvas orientation. If you accidentally flipped a layer while trying to rotate your artwork, undo it and use the Rotation slider in Crop and Resize for the canvas, or the Transform tool's Rotate options for a single layer.
Bringing Vertical Procreate Art Into a Motion Pipeline
For motion designers, a vertical Procreate canvas is usually the front end of a longer process. A few habits make the handoff smoother:
- Match the composition. Set your After Effects composition to the same ratio as the Procreate canvas (for example, 1080 × 1920) so nothing is cropped or scaled unexpectedly.
- Separate layers deliberately. Procreate's layer limit shrinks as canvas size grows, so decide early which elements need to move independently, such as characters, backgrounds, and effects.
- Export at the resolution you'll use. Upscaling a small export later costs detail. Build large enough to hold up in the final deliverable.
- Keep the landscape master. If a project needs both vertical and horizontal versions, maintain separate canvases rather than cropping one repeatedly.
Where Styleframe Fits
Once you have vertical stills, Styleframe is one tool you can look at for turning them into motion. Check its aspect-ratio options and supported export formats before you commit to a vertical workflow.
Troubleshooting Common Problems
My canvas is still landscape after rotating the iPad. Rotating the device doesn't change canvas dimensions. Use Crop and Resize or create a new portrait canvas.
The toolbars are sideways. Check Orientation Lock in Control Center. If it was engaged in landscape, turn it off and rotate the iPad.
I can't make the canvas as tall as I want. You've probably hit the hardware limit for maximum canvas size. Reduce the dimensions, or work at a smaller size and upscale later.
My art got cut off after resizing. Crop and Resize trims anything outside the overlay. Reopen your duplicate, or undo and adjust the crop before confirming.
My brush keeps rotating. Set the Rotation slider to 0% and disable Azimuth in the Shape tab.
Quick Reference
Think of "working vertically" in Procreate as two settings: a portrait canvas for the artwork, and an unlocked iPad for the interface. Get those right, and the rest is a matter of keeping your frame size consistent as the art moves into After Effects or whichever tool handles your motion.