How to Change Procreate to Grayscale
StyleFrame Team9 min read
Procreate has no one-tap grayscale button, so you convert with a layer-based method. The most reliable approach is to duplicate your artwork, place a white layer between the two copies, and set the top copy's blend mode to Luminosity. For a quick, non-destructive value check, set a fill layer on top to Saturation, or use the iPad's Color Filters accessibility shortcut to flip the whole screen to gray with a triple-click.
Each method suits a different job: a permanent black-and-white version, a toggleable value check, or a system-wide view of your reference. Below is how each one works, where it falls short, and how to carry the result into a motion pipeline.
Method 1: Luminosity blend mode (a true grayscale version)
Use this when you want an actual grayscale image, either as a separate layer or a flattened file.
- Open your artwork and open the Layers panel.
- Duplicate the colored layer from the Layers panel.
- Add a new layer and fill it with white by dragging a white color swatch from the color picker onto the layer.
- Drag the white layer so it sits between the original and the duplicate.
- Tap the N next to the top duplicate to open blend modes and choose Luminosity, found in the bottom group of the list.
- To bake it in, pinch the three layers together to merge them.
The white layer in the middle is what makes this work. Luminosity blends only the brightness of the top layer onto what's beneath it, so the white base strips out all hue and saturation and leaves the lightness information behind.
If you want a flat single-layer snapshot without merging anything, use Actions > Add > Copy canvas, then paste. That gives you a flattened version you can export while your layered file stays intact.
Trade-off: The result is static. If you keep painting on the original, you have to rebuild or refresh the grayscale copy before you check again.
Method 2: A top "value check" layer (non-destructive)
If you're painting and want to flip between color and values repeatedly, a toggleable layer is faster than rebuilding a conversion.
- Create a new layer at the very top of the stack.
- Fill it with mid-gray (50% gray). The Values tab in the color popover or the Disc picker gets you there quickly.
- Set the layer's blend mode to Saturation (some artists prefer Hue or Color, so test which one reads best for your work).
- Toggle the layer's visibility on and off whenever you want to see values.
Because nothing on your painting is altered, this is the safest option for work in progress. Group it with any helper layers and give it an obvious name so it doesn't get exported by accident.
A caveat on how "accurate" the gray is
Community testing on Procreate's own forum found that desaturated colors can look darker or lighter than you'd expect. In one example, a sampled orange (hex #ea8b5b) came out as roughly #a2a2a2 gray. That is because grayscale conversion weights color channels differently, and our eyes perceive brightness of hues unevenly. The Saturation slider, the blend-mode layer, and the Luminosity method all produced essentially the same result in that discussion, so switching methods won't fix it. Treat the gray preview as a good-enough guide to value structure, not a measurement. If you need a numeric check, sample the gray with the color picker and read the values.
Method 3: Adjustments > Hue, Saturation, Brightness
The quickest destructive route is Adjustments > Hue, Saturation, Brightness, then dragging Saturation all the way to the left.
This is fine for a throwaway version. It permanently changes pixels on that layer, though, so duplicate the layer first or keep an undo path. For anything you might want to recolor later, prefer Method 1 on a duplicate or Method 2.
Method 4: iPad Color Filters shortcut (a system-wide gray view)
Procreate doesn't currently offer a built-in grayscale toggle for the canvas or the Reference Companion. Users have asked for one, and the Procreate team has said they would look into it, so check the current release notes in case that has changed. In the meantime, iPadOS has a built-in workaround:
- Open Settings > Accessibility > Display & Text Size > Color Filters, turn Color Filters on, and select Grayscale.
- Go to Settings > Accessibility > Accessibility Shortcut and choose Color Filters.
- Triple-click the top (power) button to flip the screen to gray, and triple-click again to return to color.
The advantage is that it works over any app, including Procreate, your reference photos, and a video playing in another window. The downside is that it filters everything you see, so you can't view the gray and the color side by side. And if you've left Color Filters switched on in Settings, it won't turn off until you switch it off there or use the shortcut again, which is a common source of confusion.
Grayscale reference images
If you work from a reference photo, desaturate it in any photo editor before importing, or use the Luminosity method on the imported photo itself. Import through Actions > Add > Insert a photo. Keeping a gray and a color version of the same reference gives you a quick side-by-side that Procreate's own tools don't offer.
Bringing color back (or keeping some)
Procreate can't convert a grayscale image back to its original colors. Once you've merged the layers, that color information is gone from that layer, so the safest habit is to keep the original color layer hidden rather than deleted.
To keep a splash of color in an otherwise gray image:
- Keep the original color image on the bottom layer and the grayscale version on top.
- Select the grayscale layer.
- Use Selection in automatic mode to select the area where you want color to show through. Then swipe down with three fingers and tap Cut.
- Alternatively, use the Eraser on the gray layer to paint the color back in by hand.
Both approaches give the same result: the gray layer is removed in that area, revealing the color beneath. Selection is cleaner for hard-edged shapes. The Eraser, especially with a soft brush, works better for gradual reveals.
Why values matter beyond illustration
For motion designers, animators, and VFX artists, grayscale checks are rarely just a painting exercise. Procreate often shows up in a motion workflow as the place where boards, styleframes, matte paintings, and texture studies get drawn. In all of those, readable value structure decides whether a frame holds up once it's animated, graded, or composited over footage.
A few practical reasons to check values before you export:
- Focal hierarchy: If the key subject disappears in grayscale, it will likely disappear once motion, grain, and a grade are layered on.
- Contrast for text and graphics: Titles and lower-thirds placed over painted backgrounds need enough value separation to stay legible.
- Grade planning: A frame with clear value groupings is easier to push in color correction without breaking.
- Shared language with the team: A gray version of a styleframe makes it easier to talk about lighting and contrast with a director or colorist.
Matching the check in your motion tools
The same logic transfers to the motion and compositing apps you already use. Put a desaturation effect on an adjustment layer or a viewer-only node at the top of your setup and toggle it as a value check, which mirrors Method 2. Whichever tool you use, keep the check on its own layer or node so it never ends up in the final output.
Exporting your grayscale or color frames for production
When you've settled on the look in Procreate, export the version you actually need. Use the Actions menu to export, and pick a format that fits your pipeline: a flat image for single frames, or a layered file if you need to keep layers for compositing. Export the gray version only if you need it as a reference or a matte, and keep the color file as the master.
Two small habits save headaches:
- Name layers clearly (for example, "VALUE CHECK – hide before export") so a helper layer doesn't end up in the exported file.
- Export at the highest canvas size you can, since you'll often scale styleframes up in a comp.
Using value-checked frames as inputs for AI-driven motion
Once your frames read well in grayscale, they make strong source material for generative motion tools, because clear values and shapes give a reference-driven system something solid to hold onto. is an AI video and motion tool you can steer with your own reference material. In practice, a Procreate painting can serve as a reference or keyframe for a tool like this.
A gray version of your keyframe is also handy here as a sanity check: if the generated frames keep the value structure you painted, the lighting and focal hierarchy have survived the trip.
Quick reference: which method to use
Frequently asked questions
Does Procreate have a grayscale mode?
Not as a dedicated canvas toggle. You get grayscale through blend modes, the Hue, Saturation, Brightness adjustment, or the iPad's system-level Color Filters.
Why does my gray version look darker or lighter than I expected?
Different hues have different perceived brightness, so a saturated color can land at a surprising gray value. Compare a few methods and sample the result with the color picker if you need numbers.
Can I undo a grayscale conversion after merging?
Only with Undo while the history is still available. Otherwise, you'll need the original color layer, which is why keeping a hidden copy is worthwhile.
Is the Luminosity method different from lowering saturation?
In practice, community testing showed nearly identical gray values for the same sampled color across the main methods. The real difference is workflow: Luminosity gives you a layer-based result you can merge, while the slider changes the layer directly.