How to Change Procreate to Cmyk
StyleFrame Team8 min read
You can't switch an existing Procreate canvas from RGB to CMYK. Instead, create a new Custom canvas with the same dimensions, set its color profile to a CMYK option, and drag your layers into it from the Layers panel. The layer content is converted to the new canvas's profile. Procreate's CMYK handling is approximate, so for critical print work, export the finished RGB file and convert it in Photoshop or Affinity with the profile your printer specifies.
Why Procreate won't convert a canvas in place
Procreate locks a canvas's color space when you create it. Under Actions > Canvas > Canvas information > Color profile, you can swap between profiles of the same family, such as one RGB profile for another. You can't cross from RGB to CMYK or the other way around.
Canvases made with the Screen Size option default to RGB or Display P3, and you can only move between RGB-type profiles on them. To start in CMYK, you must use the Custom canvas option.
Changing profiles within the same family isn't harmless either. Switching mid-project can have a sudden, dramatic effect on your Time-lapse, so do it after the artwork is finished if you care about the recording.
Step-by-step: move your artwork to a CMYK canvas
This is the workaround Procreate itself documents. It works on iPad and keeps your layers editable.
- Note your canvas size and DPI. Open the original artwork and check its dimensions and resolution so the new canvas matches exactly.
- Create a new Custom canvas. In the Gallery, tap the plus icon, then the Custom canvas option (the rectangle-with-plus icon).
- Match the dimensions. Enter the same width, height, and DPI as the original. Don't duplicate the original canvas, because a duplicate keeps the same color profile.
- Choose the CMYK profile. Tap Color profile and pick a CMYK option. Procreate ships with several industry-standard CMYK profiles. If you don't know your printer's requirements, a generic CMYK profile is a reasonable placeholder, but see the caveats below.
- Tap Create.
- Select layers in the original. Open the original artwork, open the Layers panel, and swipe right on the layers you want. Selected layers highlight in blue.
- Pick them up. Press and hold the selection until the layers bunch together under your finger.
- Carry them to the new canvas. Keep holding, go back to the Gallery, and open the new CMYK canvas.
- Drop them into the Layers panel. Release the layers inside the panel itself. The content adjusts to the new canvas's profile.
Details that trip people up
- Drop into the Layers panel, not onto the canvas. In at least some versions, dropping onto the canvas reverses your layer order.
- Groups don't survive. Layers arrive ungrouped, so you'll need to regroup them.
- Clipping masks release. Layers that were clipped will come over unclipped. Re-clip them and check each one.
- Background color may need rebuilding. If your original used the background color layer, set it again on the new canvas.
- Expect a shift. Pinks, violets, and saturated colors often look duller after the move. Plan a pass to restore contrast and brightness.
What "CMYK" means in Procreate
This is the caveat most tutorials skip. Procreate's color engine is built around three color channels, so its CMYK is a simulation rather than true four-channel CMYK. Procreate's own support team has said CMYK doesn't work perfectly in the app for this reason. In practice that means:
- You may not see the full spectrum you'd get in a true CMYK application, which is why colors can look flat.
- Reported problems include quirks with the color picker and color shifts when copying and pasting layers between canvases that aren't sRGB or P3.
- Procreate says problems are unlikely unless the file is opened in a program that uses real CMYK.
If your deliverable goes to a print vendor who will open the file in a true CMYK workflow, treat Procreate's CMYK canvas as a preview, not a final color authority.
When you shouldn't convert at all
Many experienced illustrators work in RGB for everything and convert only at the end. There are good reasons.
- There is no universal CMYK profile. If you don't know which printer and paper you're targeting, you may be working in the wrong profile and shrinking your gamut for nothing. You'd then still have to convert from one CMYK profile to another.
- Many printers prefer RGB. Inkjet and giclée shops and print-on-demand services often accept RGB and handle the conversion internally. Manual conversion can limit your colors unnecessarily.
- RGB keeps your master file flexible. An sRGB or P3 original looks right on screens and can be converted to whichever CMYK profile a given job needs.
Use CMYK earlier in the process when a commercial print shop explicitly requests CMYK for offset or press work, or when you're doing packaging, books, or promotional material where consistency across printers matters.
Whichever route you take, avoid the most extreme RGB colors while painting. Highly saturated colors are the ones most likely to fall out of CMYK gamut, and keeping them in check makes later conversion smoother. If you know the paper stock in advance, factor that in too, since some papers reproduce color better than others.
The alternative: convert the finished file outside Procreate
For print-critical work, a better path is often to finish in RGB and convert in an application built for it.
- Finish the artwork in an RGB profile, preferably sRGB or Display P3.
- Export a full-resolution file (PNG or layered PSD, depending on your needs).
- Open it in Photoshop, Affinity Photo, or Affinity Designer, all of which can convert to a CMYK profile. Affinity's apps also work on iPad.
- Assign or convert to the exact profile your printer provides.
- Soft-proof if the application supports it, adjust any out-of-gamut colors, and then export the print file.
This approach puts the conversion where you can control rendering intent and profile choice, and it leaves you with an untouched RGB master. If you're sending files to a vendor, ask which profile they want before you start the conversion, not after.
Where this matters for motion and video artists
If you're reading this from a motion design or VFX background, the CMYK question usually comes up in a few situations: a client wants printed key art from the same illustrations you animate, you're building storyboards or style frames in Procreate that will also be printed for pitch decks, or you're supplying packaging and out-of-home assets alongside a video campaign.
The important distinction is that video and screen delivery stay in RGB. Motion and compositing tools generally work in RGB-based color pipelines for motion output. A CMYK Procreate canvas gives you nothing for animation or comp, and moving CMYK-simulated art into a video pipeline means another conversion step on top of the one you already did. Keep your animation source files in an RGB profile and treat any CMYK version as a separate print deliverable.
A sensible structure for mixed print-and-motion projects:
- Master artwork in RGB. Paint in sRGB or P3 and keep this file as the source of truth.
- Motion versions come from the master. Export layers or flattened frames from the RGB original into your compositing tool.
- Print versions are derived last. Convert a copy to the printer's CMYK profile, and keep it separate so you never round-trip colors back into your motion pipeline.
Using Procreate artwork in a Styleframe workflow
Because the RGB master is your motion-ready asset, it is the file to bring into any AI-assisted motion work, including Styleframe. Feed it your RGB master, not a CMYK-converted copy, so you aren't carrying print-gamut limitations into your video.
Quick troubleshooting
My colors look muddy after converting. That's the gamut compression. Brighten and add contrast on the CMYK canvas, or go back to the RGB master and avoid extreme saturation before converting again.
My layer order flipped. You likely dropped onto the canvas. Redo the move and release inside the Layers panel.
The Color profile menu only shows RGB options. The canvas was probably made as a Screen Size canvas, or you're on an RGB canvas where cross-family changes aren't allowed. Make a Custom canvas and move your layers.
The printer says CMYK, but I've heard RGB is fine. Ask them directly. Some will accept RGB and convert themselves, and others require a specific CMYK profile.
Colors changed between Procreate and another app. Check that both are using the same profile. A file opened in a true CMYK application may display differently from Procreate's three-channel rendering.
The short version
You can't flip a Procreate canvas from RGB to CMYK, but you can move layers into a new CMYK Custom canvas. Procreate's CMYK is approximate, so it's best for previews rather than final print color. For production, work in RGB, convert the finished file in Photoshop or Affinity with your printer's profile, and keep your RGB master as the source for any motion or compositing work.