How to Change Procreate Color Wheel to Grayscale
StyleFrame Team8 min read
Procreate has no grayscale switch for the color wheel, but you can get the same result in three ways. Set Saturation to 0 on the Value tab so every color you pick is a neutral gray, create the canvas with a Gray color profile so the wheel can only produce grays, or desaturate the finished artwork with Adjustments > Hue, Saturation, Brightness or a gray layer set to the Color blend mode. If your colors are stuck in grayscale and you want them back, the cause can be a temporary glitch, a gray canvas profile, or a layer mask, and users report that a hard restart or a copy into a new RGB canvas often fixes it.
Which grayscale method should you use?
"Grayscale" can mean three different things in Procreate, and each has a different fix:
Pick based on whether you need a reversible workflow. Painting a value study is different from flattening a finished piece.
Method 1: Pick grays from the color panel
The quickest way to work in grayscale is to stop the wheel from giving you saturated colors.
- Tap the color swatch in the top-right corner to open the color panel.
- Switch to the Value tab at the bottom (the sliders view).
- Drag the Saturation slider (S) all the way to 0.
- Use the Brightness slider (B) to choose your gray, from black at 0 to white at 100.
At zero saturation, the hue slider has no visible effect, so you are working purely in value. The same trick works in the Classic view: drag the picker to the far-left edge of the square, where saturation is zero, and move vertically for brightness.
If you want grays one tap away, build a palette:
- Open the Palettes tab and tap +.
- Choose Create New Palette.
- Add swatches by tapping an empty slot while your chosen gray is active.
A nine- or ten-step value ramp is a useful starting point. It works as a quick value key, and it stops you from drifting into accidental tints.
This approach does not lock the wheel. Any time you touch the Disc or Classic views, you can slide back into color. If you need a hard lock, use Method 2.
Method 2: Create a canvas with a Gray color profile
A Gray profile is the closest thing Procreate has to a grayscale-only color wheel.
- In the Gallery, tap + to start a new canvas.
- Tap the small canvas icon next to the New Canvas title (the custom canvas option).
- Choose Color Profile.
- Open the Gray tab and select a profile such as Generic Gray Gamma 2.2.
- Name the canvas and tap Create.
On this canvas, the color picker is constrained to neutral values. Whatever you select shows up gray, even if the wheel looks like it is offering color. That is useful for value studies, matte painting underpaintings, and concept roughs where you want to settle lighting before introducing hue.
Check Canvas > Canvas Information > Color Profile (the wrench menu) to see what profile a file is using. If the Gray profile has no alternatives listed, use the copy-and-paste workaround described below.
Method 3: Convert existing artwork to grayscale
Sometimes you have already painted in color and want a grayscale version to check values.
Destructive: Hue, Saturation, Brightness
- Select the layer you want to change.
- Tap the Adjustments icon (magic wand) and choose Hue, Saturation, Brightness.
- Choose Layer (not Pencil) so the adjustment affects the whole layer.
- Drag Saturation to 0 (all the way to the left).
This changes the pixels on that layer. Duplicate the layer first so you can compare against the original or return to it.
Non-destructive: a gray layer set to Color
This gives you a toggleable grayscale view over everything beneath it:
- Create a new layer at the top of the stack.
- Fill it with any neutral gray. Drag the swatch from the color panel into the layer to fill it.
- Tap the N next to the layer and set the blend mode to Color.
The Color blend mode applies the hue and saturation of the top layer to the layers underneath. Because a neutral gray has zero saturation, the composite reads as black and white while the luminance of your artwork stays intact. Hide the layer to return to color. Flatten or export with the layer hidden when you want your color version.
Luminosity method
A commonly shared alternative uses a duplicate of the artwork, a white layer, and the Luminosity blend mode, followed by merging the three layers. It works, but it is a destructive merge, so the gray-layer method above is easier to reverse.
Fixing colors stuck in grayscale
If the opposite is your problem and the picker will not give you color, work through these in order.
- Hard restart the iPad. Close all backgrounded apps, then restart the device. A temporary glitch in the color picker can be the cause, and users report this fixing it.
- Check the canvas color profile. Open the wrench menu, go to Canvas > Canvas Information > Color Profile. If it reads a Gray profile (for example Generic Gray Gamma 2.2), the canvas is a grayscale canvas, and that is why the wheel will not produce color.
- Paste into a new RGB canvas. If you cannot change the profile, create a new canvas through the custom canvas option and choose Color Profile > RGB. Then go back to the old file, select the layer, copy it with a three-finger swipe down, and paste it into the new canvas. Users report this resolves stubborn cases.
- Check how the canvas was created. Canvases made from downloaded images, such as downloaded paper textures, can end up stuck in grayscale, according to users. Importing an image that way can produce a gray canvas without you realizing it.
- Check whether you are on a layer mask. Masks work in grayscale by design, because they hide or reveal parts of the parent layer. If your layer is a mask rather than a clipping mask, you will only see grays. Switch to the actual layer.
Be careful about uninstalling and reinstalling Procreate as a fix. Deleting the app can delete your gallery if it is not backed up, so export or back up first.
Why this matters for motion and VFX pipelines
If you are a motion designer, animator, or compositor, grayscale in Procreate usually serves a purpose beyond painting. Common uses:
- Value studies for style frames. Establish lighting and contrast before choosing a palette, so your color decisions do not hide a weak composition.
- Matte and mask creation. Hand-painted grayscale mattes for roto, displacement, or luma mattes in After Effects.
- Texture and displacement maps. Height or bump maps for Cinema 4D or Blender materials.
- Look-development references. A grayscale key to check that a frame still reads when saturation is stripped away.
For all of these, color management matters as much as the painting. When you export PNGs or PSDs, check how After Effects, Nuke, or Blender interpret the file's color profile. If you plan to use a map as data (displacement, roughness), treat it as non-color data in your 3D tool rather than letting it be color-transformed.
In After Effects, you can also skip painting in grayscale entirely. Paint in color, import, and use a desaturation effect to inspect values. That keeps the original art intact and the conversion editable.
Using grayscale references in Styleframe
A grayscale value study can also serve as a controlled starting point for AI-assisted motion work. A painted value key from Procreate can act as a reference image in tools like Styleframe.
Two practical ways to use a value study in this kind of workflow:
- Keyframes: Use painted frames as start and end keyframes and let the tool generate motion between them. A grayscale start frame and a graded end frame, for example, give you a defined creative direction instead of a random result.
- Style references: Use a reference image to drive the style of your footage or frames. Grayscale references can emphasize tonal structure and line quality over hue.
Check the tool's current documentation for supported inputs, output resolution, and export formats before building it into a compositing pipeline.
Quick troubleshooting checklist
- Want gray picks only: set Saturation to 0 on the Value tab, or build a gray palette.
- Want a grayscale-locked canvas: create the canvas with a Gray color profile.
- Want a quick grayscale preview: add a gray layer at the top and set it to Color.
- Want to bake in grayscale: use Adjustments > Hue, Saturation, Brightness with Saturation at 0 on a duplicate layer.
- Stuck in gray unintentionally: restart, check Canvas Information > Color Profile, and paste into a new RGB canvas if needed.
- Exporting for compositing: verify color profile and gamma handling in After Effects, Nuke, or Blender before using the file as a matte or data map.
Procreate treats grayscale as a property of the canvas profile and the colors you choose, not as a wheel mode. Once you decide whether you need a locked canvas, a value-only palette, or a reversible preview, the right method is straightforward.