How to Change Pressure Curve Procreate
StyleFrame Team8 min read
To change the pressure curve in Procreate, tap the Actions (wrench) icon, open Prefs, choose Pressure and Smoothing, then tap Edit Pressure Curve and drag the graph to reshape it. Tap the line to add a node and raise it so light pressure makes darker, bolder marks, or lower it to make the pencil need a firmer press. In Procreate 5.4 and later, you can also set a separate curve for a single brush in Brush Studio under the Apple Pencil tab, so one adjustment no longer affects your whole library.
Where to Find the Pressure Curve in Procreate
There are two places to adjust it, and they do different jobs.
Global curve (affects every brush):
- Tap the Actions icon (the wrench) in the top left.
- Open the Prefs tab.
- Tap Pressure and Smoothing.
- Tap Edit Pressure Curve.
Per-brush curve (Procreate 5.4 and later):
- Open the Brush Library and tap a brush to open Brush Studio.
- Go to the Apple Pencil tab.
- Find the pressure graph for that specific brush and edit it there.
If you only want to fix one brush that feels stiff or too sensitive, use the per-brush graph. If your hand is consistently heavier or lighter than the defaults across everything you draw, the global curve is the right place.
How to Read the Pressure Curve Graph
The graph is simple once you know what each axis means:
- X axis (horizontal): how hard you press the Pencil, from no pressure on the far left to maximum pressure on the far right.
- Y axis (vertical): how strongly that pressure affects the brush, from no effect at the bottom to maximum effect at the top. Depending on the brush, that effect might be opacity, size, or both.
The default is a straight diagonal line from bottom left to top right. Pressure and response rise in a one-to-one relationship.
If you've used the Curves adjustment in Photoshop, the logic is the same. Pulling a point up means that input value produces a higher output value. In Procreate, that translates to a stronger mark at the same pressure.
How to Edit the Curve Step by Step
Add and move nodes
Tap anywhere on the line to add a node, then drag it. Drag a node up and the brush responds more strongly at that pressure level. Drag it down and the brush needs more force to reach the same result.
To remove a node, tap it and choose Delete. You can add several nodes to shape different parts of the pressure range independently.
Test on the canvas
Don't judge the curve in the graph alone. Draw a quick test stroke after each change:
- Start very light, press hard in the middle, and ease off at the end.
- Draw a few short strokes at your normal sketching pressure.
- Repeat with the brush you actually use for the project.
Small moves matter. A slight lift at the middle of the curve is often enough, and large moves can make the pencil feel twitchy.
Reset if it goes wrong
If you end up with a curve that feels worse, go back to Actions → Prefs → Pressure and Smoothing and tap Reset all at the bottom of the menu (you may need to scroll). Confirm when the dialog appears. Procreate's own help documentation recommends leaving global pressure alone unless you need to change it, because the stock brushes are tuned for typical use and a heavily altered curve can produce unexpected results. That is a good reason to keep notes on what you changed.
Common Curve Shapes and When to Use Them
Steeper start: light touch, visible marks
If you have to press hard to get a moderately dark line, raise the lower-left portion of the curve so it climbs quickly at the start. Light pressure now builds mid-tones faster, which feels closer to a real pencil. You can still make very faint marks with an extremely gentle touch, but you no longer have to bear down to get a mid-gray.
A related approach is dragging the top-right node toward the left. This compresses the full faint-to-bold range into a narrower band of pressure, so you can reach a maximum-strength stroke without pressing hard. It's popular with artists who prefer to draw with light, relaxed gestures.
Flatter start: more control for delicate work
Pull the beginning of the curve down and the Pencil needs more force before anything shows. This can help with fine linework, inking, and lettering, where you want deliberate pressure to produce thick-to-thin variation. It's not a good default for sketching, since you can end up pressing hard and getting almost nothing.
S-curve: gentle start, dramatic finish
An S shape keeps the transition gradual at light pressure, then makes the response ramp up faster as you press harder. Lines start thin and controlled, then swell more noticeably. This suits calligraphy and brush-lettering style work where you want a clear contrast between hairlines and heavy strokes.
Practical starting points
Treat these as starting points, not rules. Pressure preference varies with hand weight, Pencil model, and brush design.
Per-Brush Curves in Procreate 5.4
Before 5.4, there was one main pressure curve in the global settings, and changing it applied to every brush. If you made your pencil sensitive for sketching, your calligraphy brushes could suddenly feel wrong.
With per-brush curves, you can tune each tool on its own. A practical setup might look like:
- Leave the global curve at or near default.
- Give your sketch pencil a steeper start so light strokes show up.
- Give your inking pen a gentler response for controlled line weight.
- Give your texture or paint brushes a mid-range lift so opacity builds naturally.
If you're duplicating brushes for different tasks, set the curve on the duplicate rather than the original. That keeps your starting brush untouched, which makes it easier to compare behavior or roll back.
Pressure Curve vs. Smoothing
The same Pressure and Smoothing screen includes stabilization sliders. These are separate from the curve. The curve controls how pressure translates into brush response, while smoothing controls how much the line is stabilized as you draw. Raising the smoothing values increases stabilization across all brushes.
If your lines feel wobbly, adjust smoothing. If the line weight or opacity feels wrong, adjust the curve. Changing both at once makes it hard to tell which one fixed the issue.
If the Curve Doesn't Fix the Problem
If pressure feels inconsistent even after a reasonable curve adjustment, check these before reshaping the graph further:
- Pencil connection: confirm the Pencil is paired and charged. For Apple Pencil 2nd Gen or Pro, enable Bluetooth in Control Center and attach the Pencil to the iPad.
- Brush-level pressure settings: the brush itself may have pressure dynamics (size, opacity, flow) that override your expectations. Check its Apple Pencil settings in Brush Studio.
- Reset and retest: use Reset all, then test with a stock brush. If the stock brush behaves normally, the problem is in a custom brush or an earlier curve edit.
- Screen protectors and surfaces: a textured protector can change how the Pencil feels and registers light touches.
Bringing Procreate Work into a Motion Pipeline
For motion designers and animators, Procreate is often the place where style frames, character sketches, texture passes, and storyboard panels begin. A comfortable pressure curve matters more than it might seem: consistent line weight and tone across a set of frames makes the artwork easier to build on later in After Effects, Cinema 4D, Blender, or Nuke.
A few habits help:
- Lock your curve before starting a series. Changing it midway through a set of frames can produce subtle differences in line weight or opacity that show up as flicker in motion.
- Keep one brush per role. With per-brush curves, a dedicated sketch brush and a dedicated ink brush keep your marks predictable.
- Export at full resolution so downstream tools have clean source material.
Quick Reference
- Global curve: Actions → Prefs → Pressure and Smoothing → Edit Pressure Curve.
- Per-brush curve (5.4+): Brush Library → tap brush → Apple Pencil tab.
- Add a node: tap the line. Delete a node: tap it and choose Delete.
- Light touch not showing? Raise the lower-left of the curve.
- Need more control at light pressure? Lower the start of the curve.
- Reset: Prefs → Pressure and Smoothing → Reset all.
FAQ
Why does Procreate feel like I have to press too hard? The default curve is a straight diagonal line. If your touch is naturally light, steepen the start of the curve or move the top-right node left so less pressure reaches maximum response.
Should I change the global curve or a brush curve? Use the brush curve for tool-specific fixes. Use the global curve only when your overall pressure habits don't match the defaults. Procreate recommends leaving global settings alone unless needed.
Can I undo my changes? Yes. Delete individual nodes by tapping them, or use Reset all in Pressure and Smoothing to restore the defaults.
Does the curve work with styluses other than Apple Pencil? Procreate's pressure curve applies to pressure-sensitive styluses generally, though you may need to adjust it differently for each device since sensitivity varies.