How to Change Line Thickness in Procreate
StyleFrame Team9 min read
To change line thickness in Procreate, tap the brush size slider on the left side of the canvas and drag it up for thicker lines or down for thinner ones before you draw. Procreate is a raster app, so you can't change the width of a stroke after it's on the canvas. Undo and redraw at the new size, or thicken existing linework with workarounds like duplicating and merging layers, Gaussian Blur plus Curves, or Liquify's Expand tool.
Change Line Thickness Before You Draw
The fastest method is the Size slider, the upper of the two sliders on the left edge of the canvas (on the right if you've flipped the sidebar in Settings).
- Select the brush, or the Eraser or Smudge tool, you want to use.
- Drag the top slider up to make the line thicker or down to make it thinner.
- Watch the circular preview on the canvas as you drag. It shows the brush footprint at the current size.
- Draw your stroke.
The lower slider controls opacity, not thickness. It's easy to grab the wrong one when you're moving fast.
If you need a precise size, tap and hold the slider handle for finer control. Many artists settle on two or three favorite sizes per project so line weight stays predictable.
Set the Range in Brush Studio
The size slider sets the nominal size, but the brush's own settings decide how thickness responds to your hand. To open them, tap the brush in the brush library to open Brush Studio.
- Properties → Maximum Size and Minimum Size: These cap how thick or thin the slider can make the brush. If the slider won't go thin enough, raise your ceiling or lower your floor here.
- Apple Pencil → Pressure: The pressure curve controls how much line width changes as you press harder. A flatter curve gives more uniform lines. A steeper one gives expressive thick-to-thin variation.
- Stroke Properties → Taper: Taper shapes the start and end of each stroke. It controls how a line thins out at its tips, which affects how weighty the linework feels.
- StreamLine: This doesn't change thickness directly, but it smooths wobble. Smoother strokes read as more consistent in weight.
For clean, even linework, such as a style frame you'll hand off for animation, duplicate a brush you like and set its pressure response to minimal size variation. Then adjust only the slider.
Why You Can't Edit Stroke Width After the Fact
Procreate stores your drawing as pixels, not as vector paths. A stroke isn't an object with a width property. It's just colored pixels on a layer. Illustrator and After Effects shape layers can change a stroke's weight at any time because they store the path and a stroke value separately. Procreate has neither.
That's why the Procreate community consistently says there's no vector line tool for changing thickness later, and why per-stroke editing is unlikely to arrive. The practical consequence is that line weight is a decision you make while drawing, or a correction you make with pixel-based tricks.
Thicken Existing Line Art
If the lines are already drawn, you have several options. None is perfect, so pick based on how much quality you can trade for speed.
Undo and Redraw
For a single stroke, this is still the cleanest option. Undo with a two-finger tap, change the size slider, and draw it again. It's slow for whole illustrations, but it preserves crisp edges.
Duplicate, Offset, and Merge
This works best when your linework is on its own layer.
- Duplicate the line art layer.
- With the Transform tool, nudge the duplicate a pixel or two in one direction.
- Merge the duplicate down onto the original.
- Repeat in other directions (up, down, left, right) to thicken the line evenly.
Another variant is to duplicate the layer many times, merge the copies, and repeat to compound the effect. The result is a modest thickening, and edges can look slightly pixelated depending on the brush. Keep the original layer hidden as a backup so you can compare.
Gaussian Blur Plus Curves
For dark line art on a transparent or light layer, you can soften the line and then tighten the tonal range:
- Select the line art layer.
- Apply Adjustments → Gaussian Blur with a small amount, so the lines spread a little.
- Open Adjustments → Curves and adjust the curve to push the semi-transparent blurred edge back toward solid.
The line gets heavier because the blur widens it and the curve re-hardens it. Results depend heavily on your colors and layer setup, so test on a duplicate. It works better on single-color line art than on multicolor linework.
Liquify Expand
For local fixes, use Adjustments → Liquify and choose the Expand mode to bulge lines outward in specific areas. Pinch does the reverse. This is useful when one segment looks too thin or too fat compared with the rest of the drawing. It's manual and can distort edges at high strengths, so work with low pressure and small passes.
Transform (Use With Caution)
Scaling a line layer with Transform makes lines thicker, but it scales the whole drawing along with them. It's only useful if the layer holds an isolated element, such as a single outline you plan to resize anyway. Repeated scaling also softens pixels.
Thin Out Lines That Are Too Heavy
The same tools work in reverse:
- Eraser pass: Use a hard eraser with a small size to trim edges. It's slow and can leave jagged results.
- Liquify Pinch: Shrinks lines locally.
- Redraw over the top: Fill the heavy line with the background color on a layer below, then redraw thinner. This is the cleanest approach for hero lines.
- Selection plus Transform: Resize an isolated element and then correct its line weight to match.
If thinning is a regular chore, the real fix is upstream. Draw on a larger canvas, work at a lower brush size, and reduce the final image for output rather than thickening or thinning afterwards.
Keep Line Weight Consistent Across a Project
Brush size in Procreate is measured relative to the canvas's pixel dimensions. The same slider position produces a visibly different line on a 2000 px canvas than on an 8000 px canvas. If you're building multiple boards or frames:
- Use the same canvas size and DPI for every piece.
- Save a duplicated brush with fixed min and max size for your "ink" line.
- Keep linework on its own layer, so you can adjust it without disturbing color.
- Test at your final output size. A line that looks right while zoomed in can vanish at 1080p.
Adjusting Procreate Line Art in a Motion Pipeline
If your Procreate drawings are headed to After Effects, you can handle line weight on the compositing side, which is more forgiving than repainting pixels.
- Export clean assets. Export the line art layer as a transparent PNG, or export a layered PSD, so the linework stays separate from color.
- Thicken with effects. Apply Simple Choker or Minimax on the line layer to expand or contract the alpha. This is non-destructive and can be keyframed. Line weight can then animate, for example when a line "boils" or grows during a reveal.
- Re-trace if you need true vector control. If a line must be fully editable, convert it to shape layers through Auto-trace or an Illustrator trace, then set the stroke width as a number.
- Check at final resolution. Preview at 100% in your delivery size, not zoomed out.
Nuke and Blender have comparable tools (Erode/Dilate nodes in Nuke, for example) if your pipeline goes through compositing there.
Where Styleframe Fits
Once your line art is the way you want it, the next problem is often carrying that line quality across many frames or in a different visual treatment. is an AI video and motion tool built for professional artistic control. It's driven by your own reference images, video clips, and keyframes rather than a one-click black box.
A few parts of it map directly onto Procreate-based work:
- Frames-to-Video: Use keyframes you drew in Procreate as start and end points, and generate the motion between them.
- Restyle and Ink-and-Paint: Use a reference image, such as a Procreate frame with the line weight you want, to drive style transfer on footage or other frames. Your reference sets the look.
- 2D-to-3D and Turntable: Turn a flat character or prop design into something you can rotate.
- Remove Background and 4K Upscale: Clean up elements for compositing and deliver production-ready 4K output.
Iteration is non-destructive, so you can try several references against the same sources and compare. Styleframe exports image sequences, so the result lands in your existing After Effects or Nuke comp, where you can still apply Simple Choker, Minimax, or other tools to fine-tune line weight. An After Effects plugin is on the way. It doesn't replace the drawing decisions in Procreate. It extends your reference frames into motion while you keep control of the look and the compositing.
Troubleshooting Common Line Thickness Problems
The slider won't go thin or thick enough. Open Brush Studio and adjust Maximum Size and Minimum Size under Properties.
Lines look different from what the slider suggests. Check Apple Pencil pressure settings in Brush Studio. A steep pressure curve produces strong thick-to-thin variation regardless of slider position.
Strokes wobble and look uneven. Increase StreamLine in the brush settings, or turn on Drawing Assist and a guide for straight or symmetrical work.
Thickened lines look jagged. This is the cost of pixel-based thickening. Redraw key lines, or export at higher resolution and thicken in After Effects with Simple Choker.
Lines look thinner after export. Compare canvas dimensions and the scale of the delivery comp. A 4000 px canvas scaled into a 1920 px comp reduces line weight by about half.
Color Drop or fills leak. Make sure the line layer is set as a reference layer and the lines are closed. Thickening lines through merging or blur can fill small gaps, but it can also close details you wanted to keep.
Summary
Procreate has no setting for changing a stroke's width after the fact. Control thickness upfront with the Size slider and Brush Studio's size limits and pressure curve. When you have to fix existing lines, use undo and redraw for key strokes, the duplicate-and-merge or Blur plus Curves tricks for whole layers, and Liquify for local adjustments. For production work, export clean transparent line art and adjust weight non-destructively in After Effects, then use a tool like Styleframe if you need to extend those frames into motion or restyle them with your own references.