How to Change Colors in Procreate
StyleFrame Team9 min read
The right way to change colors in Procreate depends on what is on the layer. Use ColorDrop for flat shapes, Alpha Lock plus Fill Layer to recolor all the linework on a layer, Adjustments > Hue, Saturation, Brightness to shift a whole layer, and Recolor for textured or painterly shapes. For finer control, use Color Balance or Curves, or a clipped layer set to the Color blend mode.
Before You Recolor: Set Up Your Layers
Almost every recoloring method in Procreate works on the active layer, so layer structure decides how much freedom you have later. If the lettering, linework, flat fills, and shading all sit on one layer, you can only recolor them together. Separate them from the start.
A few habits make recoloring easier:
- Keep linework, base colors, shadows, and highlights on separate layers.
- Name or group layers by element, such as "hero jacket" or "background foliage," so you don't recolor the wrong one.
- Duplicate a layer before a destructive change. Adjustments and fills are baked into pixels once you commit them.
This matters even more if the artwork is headed to After Effects as a layered PSD. Layers that are already separated in Procreate become layers you can still tweak, animate, or grade in your compositing app.
Method 1: ColorDrop for Flat Shapes
ColorDrop is the quickest option when you have a closed shape filled with a single color.
- Choose the new color in the color picker.
- Drag from the color dot at the top right of the screen to the shape you want to change.
- Release inside the shape.
Sweep your finger or Pencil straight from the dot to the target. If you pause on the dot, it can switch to your previously selected color.
ColorDrop works one region at a time. If you want to change everything on a layer, such as turning black lettering white, it is slow. Use Alpha Lock instead.
Method 2: Alpha Lock and Fill Layer for Linework and Lettering
Alpha Lock restricts changes to pixels that already exist on a layer. This is the cleanest way to recolor line art or lettering without fringing or leftover dark pixels.
- Select your new color.
- Open the Layers panel and tap the layer with your drawing.
- Choose Alpha Lock. A checkerboard pattern appears on the layer thumbnail. A two-finger swipe right on the layer also toggles it.
- Tap the layer again and choose Fill Layer.
Every drawn pixel now takes the new color, and transparent areas stay transparent. You avoid the funny edges and leftover black pixels you often get from selecting letters one at a time.
While Alpha Lock is on, you can also paint directly on the layer and your strokes will stay confined to the existing marks. That makes it easy to add gradients or multiple colors to linework. Turn Alpha Lock off when you want to draw freely again.
Method 3: Hue, Saturation, Brightness for Whole-Layer Shifts
If you want to shift the color of an entire layer while preserving its texture and value structure, use the HSB adjustment.
- Select the layer.
- Tap the Adjustments icon (the magic wand) and choose Hue, Saturation, Brightness.
- Drag the sliders:
- Hue rotates through the color spectrum.
- Saturation moves from gray to fully vivid.
- Brightness lightens or darkens the layer.
- Tap the Adjustments icon again, or choose another tool, to commit. A two-finger tap undoes the change.
HSB is a good fit for moving a brown tree to green or warming up a background layer. It treats all pixels on the layer the same way, so it won't isolate a single object. If the layer holds several colors, they all shift together, and relationships between them stay intact.
By default, an adjustment applies to the whole active layer. If you only want a portion changed, make a selection first or move that element to its own layer.
Method 4: Color Balance and Curves for Grading
When the goal is correcting or stylizing color rather than swapping one hue for another, move to Color Balance and Curves. These will feel familiar if you grade in After Effects or Premiere Pro.
Color Balance
Color Balance exposes red/cyan, green/magenta, and blue/yellow sliders. You can target Shadows, Midtones, or Highlights separately. Midtones are selected by default and give the most even adjustment. A common approach is to push shadows toward blue or teal and highlights toward warm tones for a split-tone look.
Curves
Curves is the most advanced adjustment in Procreate. It shows a diagonal line over a histogram, and bending the line changes tone and contrast. Raising the curve brightens the layer. This helps when colors looked fine on a dark interface at high screen brightness but turn muddy in daylight or against a light background.
For motion designers, Curves can also help match a Procreate illustration to a palette in an existing project.
Method 5: Recolor for Textured and Painterly Shapes
Flat fills are easy. Brushwork with texture and varied values is harder, and this is where Recolor helps. It lets you preview and apply a new color to a shape on artwork with texture.
Recolor is not in the Adjustments menu. In current versions, you reach it through the Quick Menu, so you may need to set that up first:
- Open Actions > Preferences > Gesture Controls.
- Choose QuickMenu and pick the gesture that will open it.
- In the Quick Menu, tap and hold one of the buttons and select Recolor from the alphabetical list.
To use it:
- Select the layer containing the object.
- Pick the new color.
- Open the Quick Menu and tap Recolor. A small crosshair cursor appears.
- Drag the cursor onto the shape you want to change. Procreate previews the new color on that region.
- Tap to apply the change.
Here are the tips that matter most:
- Check the active layer. Recolor only affects the selected layer.
- Position the cursor carefully. If it sits on the background, the background changes instead of your object.
- Adjust the threshold. If Recolor doesn't cover everything, or spills too far, change the flood threshold slider at the bottom of the screen.
- Change colors live. While Recolor is active, you can pick other colors from your palette and preview them before committing.
Results depend on how clearly the shape is separated from its surroundings. For complex textures, you may need to run Recolor more than once or clean up afterward with Alpha Lock.
Method 6: Clipping Mask with a Color Blend Mode
This is the most flexible, non-destructive approach in Procreate and the one closest to adjustment-layer logic in After Effects.
- Create a new layer directly above the one you want to recolor.
- Tap the new layer and choose Clipping Mask, so it only affects the layer below.
- Set the new layer's blend mode to Color. Overlay, Multiply, and Soft Light are also worth testing for different looks.
- Paint on the clipped layer with the color you want.
Because the original pixels are untouched, you can erase, repaint, lower the opacity, or hide the layer without damaging your art. It also lets you recolor specific areas of a layer, not just the whole thing. Color mode keeps the luminance of the original while replacing hue and saturation, which preserves shading.
Choosing the Right Method
Recoloring for a Motion Pipeline
If your Procreate artwork is going into motion work, a few practices save time later.
- Finalize color in Procreate only when it's an art decision. If a palette might change after client feedback, keep recolorable elements on separate layers or use clipped Color layers, then export a layered PSD and handle final color adjustments in After Effects.
- Check your color profile settings. Mismatched profiles between Procreate and your composition can make colors shift when you import, so confirm your profile before you start.
- Export flat color passes when helpful. Solid-color versions of elements can serve as mattes or color-range references in After Effects, Nuke, or Blender.
- Keep Alpha clean. Alpha Lock and Fill Layer recolor only the pixels that already exist, so transparent areas stay transparent when the linework goes into a comp.
When Recoloring Becomes Restyling
Procreate's tools work well for controlled color changes on individual frames or layers. They are less practical when you need a consistent new look across many frames or a moving shot. Recoloring an illustration is one task. Carrying a different palette or rendering style through a sequence is a different one.
That is where can sit alongside your Procreate work. It is an AI video and motion tool. In practice, you might design and recolor keyframes in Procreate, then take the results into your comp in After Effects or Nuke for final color work.
Troubleshooting Common Recolor Problems
Edges look rough or have a halo. Use Alpha Lock and Fill Layer instead of selecting and filling. If you used ColorDrop, retry with a clipped layer.
Recolor changed the whole background. The crosshair was probably on the background, or you were on the wrong layer. Undo, select the correct layer, and move the cursor onto the object.
Hue shift affects more than you wanted. Adjustments apply to the whole active layer. Move the element to its own layer or make a selection first.
Colors look different after export. Check your color profile settings and the color settings of the app you are importing into.
You can't find Recolor. It isn't in the Adjustments menu. Add it to the Quick Menu through Gesture Controls.
Final Thoughts
No single tool in Procreate handles every recoloring job. ColorDrop and Alpha Lock cover most flat art and linework. HSB, Color Balance, and Curves handle whole-layer changes and grading. Recolor deals with textured shapes, and clipped Color layers give you a non-destructive option. Organize your layers first, pick the method that fits the content, and you can change colors quickly without degrading your artwork.