How to Cdraw a Forest in Procreate
StyleFrame Team8 min read
To draw a forest in Procreate, build it in depth layers: a flat atmospheric background, then pale distant trees, mid-ground trunks, and dark foreground shapes. Add light with soft airbrush glows, then finish with texture and detail. Work on separate layers for each depth plane, use a limited palette entered by hex code, and keep everything on the default brushes. For motion artists, this layered structure also gives you a forest you can export as a layered file and animate with parallax in After Effects.
Set Up the Canvas Before You Draw
Start with a canvas sized for how the art will be used. Procreate's default A4 at 300 DPI works for illustration. If the forest is destined for a comp, create a custom canvas at your delivery ratio instead, such as 3840×2160 for UHD or taller if you plan to push a camera move through it. Large canvases can limit how many layers you can use, so plan your layer count before committing to resolution.
Keep the color profile at the default sRGB unless your pipeline demands otherwise. Mismatched profiles can make a forest look different once it lands in After Effects or Nuke.
Choose a Palette First
Forests fall apart when every green is a slightly different saturated green. Pick roughly 20 to 30 colors before you paint, organized by depth:
- Background: desaturated blue-greens or warm hazy tones.
- Mid-ground: mid-value greens with some hue shift toward teal.
- Foreground: the darkest values, often near-black green or brown.
- Light accents: a small group of warm yellows or pale greens.
In Procreate, open the color panel's Value tab, paste each hex code, and save the swatches into a custom palette. This lets you reset your colors instantly if you drift.
Build the Forest in Depth Layers
Think of the forest as stacked cards, the same way you would build a parallax scene. Create a new layer for each plane and name them: Sky, Far, Mid, Near, Foreground, Light.
Step 1: Fill the Background
Drag a color from the color circle onto the canvas to flood-fill the base layer. Choose the lightest, haziest tone in your palette. This is the color the farthest trees will fade into, so it sets the mood. Blue-gray gives you a misty morning, while pale yellow-green gives a sunlit clearing.
On a new layer, use a large soft airbrush at low opacity to add a gradient: lighter near the horizon or the center, slightly darker toward the edges. This acts as a built-in vignette and pulls the eye inward.
Step 2: Paint the Far Trees
Use a medium airbrush or a flat hard brush to block in tall, thin tree shapes with a color only slightly darker than the background. Keep them simple: vertical strokes with minimal branching. Vary the heights and spacing so they do not read as a picket fence.
Lock the layer's transparency with Alpha Lock and sweep a soft brush across it for a gradient, lighter at the bottom where ground haze gathers. Atmospheric perspective does most of the work here, so edges should be soft and contrast low.
Step 3: Add the Mid-Ground
On a new layer, paint thicker trunks in a darker, slightly more saturated tone. This is where you can introduce:
- Slight trunk taper and a subtle lean.
- A few visible branches rather than full foliage.
- Clusters of leaves suggested with a textured brush, not drawn individually.
Procreate's default Organic brush set includes foliage-style brushes, and the Inking set includes pens like the Studio Pen for cleaner trunk edges. Use the foliage brush sparingly. Stamping it everywhere creates a repetitive pattern that reads as clip art.
A useful rule: keep the mid-ground values clearly darker than the far trees, but not as dark as the foreground. If you squint and cannot tell the three planes apart, increase value contrast between them.
Step 4: Draw the Near Trees and Foreground
The nearest trunks should be the largest, darkest, and most detailed. Paint them as big vertical shapes that may run off the top of the canvas, which immediately creates scale. Add bark texture with a dry or textured brush on a clipping-mask layer so the texture stays inside the trunk shape.
Foreground elements such as ferns, grass blades, rocks, and roots go on their own layer. Keep these dark and slightly out of focus if you want a shallow depth-of-field feel. A Gaussian Blur applied to that layer (under Adjustments) is quick and reversible if you duplicate the layer first.
Create the Ground and a Path
A forest feels grounded when the floor has structure. Block in a path or clearing that leads the eye through the scene. A winding path that narrows toward the center creates depth quickly, and a stream or fallen log can do the same job.
Paint the floor on its own layer beneath the trunks so tree bases overlap it. Add moss, leaf litter, and roots with a mix of textured brushes and small hand-painted shapes. Keep the brightest, warmest patches where light would hit the floor.
Light and Atmosphere
Light separates a competent forest drawing from a flat one.
Light Rays
Create a layer above everything and set its blend mode to Add or Screen. Using a soft airbrush in a pale warm color, paint diagonal bands of light from one corner. Lower the opacity until it feels natural, then erase gently where the rays should break around trunks. A light Gaussian blur or Motion Blur along the ray direction smooths the result.
Haze and Depth
Add another Screen or Normal layer between your depth planes with a soft low-opacity wash. Placing haze between the far and mid layers, rather than over everything, preserves foreground contrast while increasing the sense of depth.
Highlights and Rim Light
On a clipping-mask layer above the trunks, paint thin highlights on the side facing the light source. A rim of warm light on a dark trunk adds dimension more effectively than extra rendering.
Glows and Particles
If your scene has fireflies, pollen, or dust motes, paint them on a separate layer with a small hard brush, then duplicate the layer and blur it for a bloom effect. Keeping them separate matters later if you animate them.
Texture and Final Detail
Once the large shapes and lighting work, finish with small touches:
- Add a few leaves overlapping trunk edges to break up straight lines.
- Use a grain or noise texture at low opacity to unify the layers.
- Check values by temporarily applying a black-and-white adjustment layer. If the planes merge, adjust them.
- Flip the canvas horizontally to catch composition mistakes you have stopped seeing.
Avoid over-rendering. In a forest, restraint reads as realism because the eye fills in repeated texture.
Prepare the Forest for Motion
Procreate is a drawing tool, but a layered forest is a natural source for animation work. A few habits make the handoff to After Effects easier:
- Keep depth planes separate. Do not merge Far, Mid, Near, and Foreground. Each can sit at a different Z position in a 3D layer setup for parallax.
- Paint beyond the frame. Extend backgrounds and trunk bases past the canvas edges so camera moves do not reveal empty pixels.
- Isolate effects layers. Light rays, haze, and particles should be exportable on their own so you can adjust blend modes and animate them in the comp.
- Name layers clearly. Clear layer names save time when the layered file opens in After Effects.
- Export a flat reference too. A single PNG of the finished frame is useful as a reference for AI or comp work later.
Where Styleframe Fits After the Drawing
Once you have a finished forest frame, the next question for many motion teams is how to extend it into moving footage without losing the look. Reference-driven AI video tools such as Styleframe may be able to pick up from your Procreate work. They are not a replacement for drawing the forest. Your illustration becomes the reference that drives the output.
Your compositing can stay where it is: grade, add particles, and finish the forest in the same comp as the rest of the shot.
Common Mistakes When Drawing a Forest
- Uniform tree sizes and spacing. Vary both to avoid a repeating pattern.
- Too many saturated greens. Shift hues toward blue in the distance and toward yellow in the light.
- Equal detail everywhere. Reserve sharp detail for the foreground and focal areas.
- Flat lighting. Even one directional ray or rim light adds depth.
- Merging layers too early. You lose flexibility for both revisions and animation.
A Simple Workflow Summary
- Set the canvas size and sRGB profile, and save a palette by hex code.
- Flood-fill a hazy background and add a soft gradient.
- Paint far trees, then mid-ground trunks, then dark foreground elements, each on its own layer.
- Add a floor and path, then light rays, haze, and rim highlights.
- Texture, check values in grayscale, and flip to test the composition.
- Export the layered file plus a flat reference, then bring the forest into After Effects or a reference-driven tool like Styleframe for motion.
Drawing a forest is mostly a lesson in value, depth, and restraint. If you build it in clean layers, the same file works as an illustration, a parallax setup, and a reference for the rest of your motion pipeline.