How to Bring an Image Forward in Procreate
StyleFrame Team8 min read
In Procreate, an image comes forward by moving its layer higher in the Layers panel. Open the panel, tap and hold the layer, and drag it above the layers it should cover. There is no "Bring to Front" command like Photoshop's or Illustrator's. Stacking order is the only control, so the top of the list is the front of the canvas and the bottom is the back.
How Layer Order Works in Procreate
Procreate stacks layers like any compositing app. The layer at the top of the list renders in front, and each layer below it sits further back. If you work in After Effects, the Layers panel behaves like the timeline layer stack. In Premiere Pro, higher video tracks sit in front of lower ones. In Nuke, the B input of a Merge node is the background and the A input sits over it. Procreate uses the same logic.
That means "bring forward" is never a property of the image. It is a property of the layer holding the image. If you can't move something in front, the cause is almost always that it is on the same layer as other content, or that it sits inside a group that is ordered differently.
Step by Step: Bring a Layer Forward
- Tap the Layers icon (two overlapping squares) in the top-right corner of the interface.
- Find the layer containing the image or artwork you want in front.
- Press and hold the layer until it lifts out of the list.
- Drag it upward until it sits above the layer or layers it should cover.
- Release. The canvas updates immediately.
Because Procreate has no single-step shortcut, you may need to drag across several layers on a busy canvas. Collapsing groups first (covered below) shortens the distance.
Bringing an Imported Image Forward
When you bring in a photo or reference through Actions → Add → Insert a Photo (or Insert a File), Procreate creates a new layer for it. That layer normally lands directly above the layer you had selected, not at the top of the stack. If the image appears hidden behind other artwork, the fix is the same: hold the new layer and drag it higher.
A few details specific to imported images:
- Check the layer, not the canvas. Tap the image's layer thumbnail to confirm you're moving the right one. A newly inserted photo is often named after the file or labeled simply as a layer.
- Resize after reordering. Once the layer is in the right position, use the Transform tool (the arrow icon) to scale or reposition it. Reordering and transforming are independent. Moving a layer up the stack doesn't change its position on the canvas.
- Dragging from another app. If you drop an image onto the canvas from Files or Photos on iPad, it also arrives as a new layer, and the same reordering applies.
Bringing Multiple Layers Forward at Once
Moving layers one at a time gets tedious when an illustration has dozens of them. Two approaches help.
Select several layers
Swipe right on a layer to select it, then swipe right on others to add them to the selection. With several layers highlighted, you can press and hold one of them and drag the whole set together. This is useful when a character's outline, shading, and highlight layers all need to move in front of a background element.
Use groups
With multiple layers selected, tap Group in the Layers panel. The layers collapse into a single folder that you can move as one unit. Groups also solve a common ordering problem: layers inside a group only reorder relative to each other within that group, while the group itself reorders against the rest of the stack. If an image won't move in front of something, check whether one of them is inside a group that is lower in the list.
To pull a layer out of a group, drag it above or below the group's boundary in the Layers panel.
When the Layer Is Forward but Still Looks Wrong
A common frustration, and one raised often by artists coming from other apps, is moving a color layer above line art and finding that it covers the lines. The ordering is working correctly: the upper layer is opaque, so it hides what's beneath it. There are several fixes, and the right one depends on what you want.
- Swap the order. Keep the color layer below the line art. This is the standard approach for inking and coloring, and it keeps the lines visible.
- Change the blend mode. Tap the "N" next to the layer and choose Multiply. White areas on the upper layer then become transparent and the lines show through.
- Use a clipping mask. Place a layer above a base layer and choose Clipping Mask. The upper layer then only shows where the layer beneath has content, which is handy for shading and texture.
- Lower the opacity. Useful for tracing or when you only need a partial overlay.
- Check Alpha Lock and masks. If part of an image seems to be missing rather than hidden, a layer mask or selection may be limiting what you see.
Moving and Nudging the Image Itself
Sometimes "forward" actually means moving the image's position on the canvas, not changing the stack order. Use the Transform tool for that. Select the layer, tap the arrow icon, and drag the image or use the handles. With Magnetics turned on you get snapping to the canvas center and edges, which helps with precise placement.
For small adjustments, select the layer and tap just outside the bounding box in the direction you want to move. The image shifts in small increments. Dragging with a finger or Apple Pencil from outside the box moves it freely. Either way, this changes where the image sits, not whether it's in front of or behind another layer.
Troubleshooting Common Problems
The layer won't drag. Make sure you're pressing and holding long enough for it to lift. If the layer is locked, tap it and check the lock option, since locked layers can limit editing.
The image is above, but still doesn't appear. Check that the layer's visibility box is ticked, that its opacity isn't near zero, and that the blend mode isn't hiding it.
Order changed after a group was moved. Remember that the group's position governs everything inside it. Expand the group and check the order within it.
Cutting or pasting changed the stack. Pasted content typically creates a new layer above the current one. Reorder it after pasting.
Carrying Layer Order Into Your Motion Pipeline
Procreate is often where motion designers build character art, backgrounds, textures, or storyboard frames before moving to After Effects, Cinema 4D, or Blender. Layer order matters here because it determines how the artwork unpacks downstream.
When you export as PSD through Actions → Share, the layers carry across. In After Effects, importing the PSD as a composition keeps the stack in the same order, so what you arranged in Procreate becomes your starting layer structure. A few habits make that handoff cleaner:
- Name layers before export. "Layer 14" is not helpful at 2 a.m. in a comp. Rename them in Procreate by tapping the layer and choosing Rename.
- Separate elements that will move. If an arm will rotate or a cloud will drift, keep it on its own layer rather than merging it.
- Keep depth order intentional. The stack order you set becomes your z-order in the comp. If you plan to place layers in 3D space in After Effects, Cinema 4D, or Blender, correct stacking now saves rework.
- Avoid merging early. Merged layers are difficult to separate later, so merge only when you know you won't need to animate pieces independently.
Where Styleframe Fits After Procreate
Once your illustration is organized, the next question is often how to move it. Styleframe is an AI video and motion tool built for artists who want control over the result rather than a one-click black box. You can use a finished Procreate frame, or a pair of them, as keyframes for Frames-to-Video, so the motion is driven by images you've actually drawn.
Other tools in the same workflow include Restyle and Ink-and-Paint, which apply a reference-driven style to existing footage or frames, and 2D-to-3D and Turntable for exploring a drawn character from other angles. Remove Background can isolate a subject you've exported from Procreate, and 4K Upscale prepares results for production. Generations are driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variations without overwriting earlier work.
For pipeline fit, Styleframe exports image sequences and works alongside After Effects and Nuke, so compositing stays where it already lives. An After Effects plugin is on the way. Layer ordering in Procreate still matters in this flow: clean, well-separated layers give you better source frames and cleaner mattes to bring into your composite.
Quick Reference
- Bring forward: Layers panel → hold the layer → drag up.
- Send backward: hold the layer → drag down.
- Move several at once: swipe right to select, then drag, or Group them.
- Imported image hidden: it's a new layer; drag it above the content that covers it.
- Color covers line art: move it below the lines or set it to Multiply.
- Reposition without reordering: use the Transform tool.
Procreate's approach is simple once you treat the Layers panel as a compositing stack. Get the order right, name your layers, and the same structure will carry cleanly into whatever motion tool comes next.