How to Blend Watercolor Procreate
StyleFrame Team7 min read
To blend watercolor in Procreate, use a brush with Wet Mix enabled (Dilution around 70% and Charge around 30% is a good starting point), then paint wet-on-wet by laying a second color into the first while the strokes are still overlapping. For smoother gradients, switch the brush's Rendering mode to Luminance Blending, soften edges with a lightly applied Smudge tool using the same brush, and build depth with transparent layers set to Multiply. Procreate does not run a true fluid simulation, so convincing watercolor comes from combining brush settings, paper texture, and layering rather than from a single "blend" control.
What "blending" means in Procreate's watercolor workflow
Real watercolor blends because wet pigment diffuses into neighboring wet pigment. Procreate's developers have said they draw inspiration from traditional media without simulating it directly, and that watercolor is hard to reproduce without a full simulation engine. Knowing that helps you set expectations: you're approximating wetness with a handful of tools.
Those tools fall into four groups:
- Wet Mix settings in Brush Studio, which control how a brush picks up and drags existing color.
- Rendering and blending modes on the brush, including Luminance Blending for hue transitions.
- Smudge and Blur tools, which push or soften paint after it's down.
- Layer techniques, such as Multiply, clipping masks, and Alpha Lock, which fake glazing and controlled washes.
Most professional-looking results mix at least two of these.
Step 1: Set up the canvas for watercolor
Start with decisions that make blending easier later.
- Add a paper texture. Put a cold-press or rough paper texture at the top of the stack, set to Multiply, or use a brush kit that bakes grain into the stroke. Texture hides digital smoothness and gives soft edges something to catch on.
- Place your sketch on top. Set the sketch layer to Multiply so it never covers the paint, and paint on blank layers beneath it.
- Pick a restrained palette. Watercolor looks best with a small set of related hues. Fewer colors means cleaner mixes when they overlap.
- Work on separate layers for major shapes. Separation gives you control over what you can rework without affecting other shapes.
Step 2: Configure a brush for blending
You can use a built-in painting brush as a base, or duplicate one so you never overwrite the original. Open Brush Studio and adjust these areas.
Stroke and Dynamics
- Streamline: around 50% smooths the path so strokes feel fluid instead of shaky.
- Spacing: near 0% keeps the stroke continuous, avoiding the stamped look that breaks the illusion.
- Flow and Jitter: a medium Flow with slight Jitter adds small irregularities.
- Opacity Jitter: roughly 30–40% mimics uneven pigment deposit.
Color Dynamics
Small values go a long way. A Hue Jitter of a few percent and a Saturation Jitter of about 10% introduce subtle variation between strokes, similar to how water content changes pigment strength.
Wet Mix
This is where the blending behavior lives.
- Dilution: controls how much the brush thins and spreads color. Around 70% gives a watery feel.
- Charge: controls how much of the brush's own paint is loaded. Around 30% lets the canvas color dominate and encourages mixing.
- Pull and Grade: adjust how the paint flows and spreads on the canvas.
Treat these numbers as a starting point. Test on a blank layer, paint two overlapping colors, and adjust Dilution up if the mix is too stiff or Charge up if the brush erases what's underneath.
Step 3: Blend wet-on-wet
Wet-on-wet is the classic soft, bleeding look.
- Paint a loose wash of your first color using varied pressure. Leave small gaps; voids read as paper and make the shape feel organic.
- Without lifting to a new layer, paint a second color so it overlaps the first. With Wet Mix active, the colors should mingle at the border.
- Make your final pass with lighter pressure and back-and-forth strokes across the seam. Don't scrub. A few deliberate passes give a better gradient than many timid ones.
- Let a stroke's own imperfections remain. Slight striations from overlapping passes feel painterly, and fighting them tends to flatten the result.
A known limitation: getting a perfectly silky value gradient with a single wet brush is difficult, because overlapping strokes leave visible striations. If you need a smoother grade, move on to the next two methods rather than forcing the wet brush.
Step 4: Use Luminance Blending for smoother color transitions
For gentle hue-to-hue transitions, open the brush's Rendering settings and try Luminance Blending. Users on Procreate's forum report that it handles seamless hue blending well, which makes it a useful option for smooth watercolor-style mixing.
Pair it with a soft, low-opacity brush for sky gradients, backgrounds, or large washes. Combine it with Wet Mix only if you want extra bleeding; for a clean gradient, you may want it off.
Step 5: Soften with Smudge and Blur
Sometimes the best blend happens after the paint is down.
- Smudge with a watercolor brush. Select the Smudge tool, then choose the same brush you painted with, so the pushed pigment keeps the same grain. Use low pressure and pull from dark into light.
- Gaussian Blur at low strength. Apply to a duplicate of the layer, then erase back into it with a textured eraser so only some edges stay soft. This creates the contrast between hard and lost edges that makes watercolor believable.
- Perspective Blur or Motion Blur are rarely right for classic watercolor, but they can help with atmospheric washes in backgrounds.
Step 6: Build depth with layering and glazing
Real watercolor builds up transparent layers. Mimic that digitally.
- Set paint layers to Multiply so overlapping colors darken the way transparent pigment does.
- Paint shadows on a clipped layer above a base shape. Clipping keeps the shadow inside the form without touching the original.
- Use Alpha Lock for recoloring a finished shape with another wash while preserving its silhouette.
- Reduce layer opacity instead of picking a lighter color when you need a transparent glaze. It keeps your palette consistent and lets you adjust later.
- Add edge darkening. Paint a thin, slightly darker line along a wash edge to imitate the pigment that collects as water dries.
If a shape comes out awkward, the Warp tool can reshape a wash without repainting it.
Common problems and fixes
Colors turn muddy. Too many overlapping hues or too much Charge. Reduce the palette, lower Charge, and avoid blending complementary colors at full strength.
The blend looks airbrushed. A perfectly smooth brush can cause this. Add paper texture and increase Jitter.
Strokes erase what's underneath. Dilution is too high or Pull is excessive. Lower both and test on a duplicate layer.
No visible blending. Check that you're painting on the same layer as the color you want to mix with.
Everything looks too uniform. Vary pressure, vary stroke direction, and leave deliberate voids instead of filling every area.
Taking Procreate watercolor into motion
Many motion designers use Procreate for style frames, textures, and illustrated elements before they ever open a timeline. The challenge is turning a handful of painted stills into moving footage without losing the hand-painted character.
A practical approach is to treat your Procreate work as a style reference. is an AI video and motion tool, and you can use a watercolor painting as a reference image to push footage or animation toward that painted look.
Once you have motion output, you can bring it into a compositing tool such as After Effects or Nuke, add your own grain, paper texture, and color grading, and keep the final look under your control.
Whatever tool you use for motion, the same watercolor principles apply: keep edges varied, preserve paper texture, and avoid over-smoothing, which is the quickest way for painted footage to feel synthetic.
Quick reference workflow
- Add paper texture and a Multiply sketch layer.
- Duplicate a painting brush; set Streamline ~50%, Spacing near 0%.
- Add mild Opacity, Hue, and Saturation Jitter.
- In Wet Mix, try Dilution ~70% and Charge ~30%, then tune.
- Paint wet-on-wet with varied pressure and leave voids.
- Use Luminance Blending for smooth hue transitions.
- Smudge with the same brush and selectively blur for soft edges.
- Glaze with Multiply layers, clipping masks, and edge darkening.
- Export stills or style references for your animation pipeline.
Watercolor in Procreate rewards restraint. A well-tuned brush, a believable paper texture, and a few deliberate blending passes will look more convincing than any amount of heavy smoothing.