How to Arch Letters in Procreate
StyleFrame Team8 min read
Procreate has no built-in command to arch text, so you bend it yourself. Draw an arc as a guide, type the text on one line, then curve it with Transform > Warp (Advanced Mesh), push it with Liquify, or rotate each letter along the arc by hand. All three methods rasterize the text, so duplicate the text layer first if you may need to edit the wording later.
Why Procreate Can't Arch Text Natively
Procreate is a raster painting app. Its text tool is relatively new and has no text-on-path or text-warp feature, so anything that bends letters converts them to pixels. Once that happens you can't change the wording, font, or kerning, and scaling up softens the edges.
Vector apps such as Illustrator can warp text and keep it live. Affinity Designer can't keep warped text as editable type, so it isn't a complete fix either. If you arch text often and need it to stay editable, plan to build it in a vector tool and use Procreate for the artwork around it. If you're illustrating, hand lettering, or want a painted look, the methods below work well.
Before You Start: Set Up the Text
A clean setup makes every method easier.
- Work at a generous canvas size. Warping and liquifying resample pixels, so extra resolution keeps edges sharp.
- Add the text. Tap Actions (wrench) > Add > Add Text, then type your words.
- Put the text on one line. Newly added text may wrap into a column. Drag the blue nodes at either end until it sits on a single line.
- Pick the font and increase kerning. Open the Design settings and add letter-spacing. Wider spacing keeps letters from colliding on the inside of a tight curve.
- Draw an arc guide on a new layer below the text. Use a monoline brush, draw a circle, and hold at the end of the stroke so QuickShape snaps it to a clean shape. Erase the half you don't need. You can also switch on the Drawing Guide in Actions > Canvas, shrink the grid to suit, and draw the arc against it. Tap Edit Shape to adjust the nodes until the curve is symmetrical.
- Duplicate the text layer and hide the copy. This is your editable backup.
Method 1: Arch Text with the Warp Tool
Warp is the most predictable option for a smooth, symmetrical arch.
- Select the text layer and tap Transform (the arrow icon).
- Choose Warp in the bottom toolbar.
- Tap Advanced Mesh to get a denser grid of control points. The default mesh is too coarse for a smooth arc.
- Center the text on your guide, then drag the mesh points so the baseline follows the arc. You can also drag any part of the mesh, not just the nodes.
- Work from the center outward. For a symmetrical arch, mirror each adjustment on both sides. Keep the blue points as even as you can.
- Check the letter heights. A common mistake is letting the outer letters shrink or stretch. Pull the top edge of the mesh along a second, larger arc so the cap height stays consistent.
- Tap Transform again to commit.
Best for: quick arches on short words, badges, logos, and seals. Trade-off: many small adjustments, and long phrases can distort in the middle.
Method 2: Arch Text with Liquify
Liquify treats your text like wet paint.
- Select the text layer, tap Adjustments (the magic wand icon), and choose Liquify.
- Pick Push and set the brush size. It should be large enough to move a whole letter group, but not so large that it drags neighboring letters.
- Turn on the brush cursor in Prefs so you can see the brush outline.
- Push the text in short strokes in the direction you want it to move. You're moving existing pixels, not drawing the curve, so follow your guide.
- Work in passes. A few light strokes across the whole word look better than one heavy push on a single section.
Best for: organic, slightly imperfect arches and hand-lettered looks. Trade-off: it's hard to gauge how much the shapes will stretch, and the result is rarely perfectly symmetrical.
Method 3: Place and Rotate Each Letter
For maximum control, skip warping and place the letters manually.
- Add each letter as its own text layer by typing it separately.
- Position the first letter at the left end of the arc, the last at the right end, and the center letter at the top.
- Use the Transform tool to rotate each letter so its baseline sits tangent to the arc. Letters near the ends rotate the most, and letters at the top barely rotate.
- Space letters evenly along the arc, not along a straight line. Letters on the outside of a curve need slightly more room than ones on the inside.
- Group the letters when you're done so you can move or scale the arch as one unit.
Because each letter sits on its own layer, you can fine-tune spacing and rotation letter by letter. This is also a useful structure to hand off if the letters will be animated.
Best for: logos, headline lettering, and anything you need to animate or fine-tune. Trade-off: it's the slowest method and takes a good eye for spacing.
Method 4: Arch in a Vector App, Then Bring It In
If you need clean, resolution-independent curves, do the arching elsewhere:
- In Illustrator, warp the text, then export a high-resolution PNG.
- Import it into Procreate and use it as a guide layer, painting your own lettering over it.
- Or reverse the flow: finish your artwork in Procreate, export it, and finalize the layout in the vector app.
Some illustrators keep the text layout in a vector app and use Procreate only for the artwork. It avoids the quality loss of re-importing low-resolution text, and it keeps the wording editable until the end.
Which Method Should You Use?
Tips for Cleaner Arches
- Increase tracking before you bend. Curving compresses letters on the inside edge.
- Use a second guide for the cap height. An arch has a baseline curve and a top curve, and both should be concentric.
- Optically adjust, don't just measure. Heavy letters like O or M can look off even when the geometry is correct. Nudge them.
- Keep the original layer. If the client changes one word, you'll be glad you have the unwarped text.
- Work large, then export. Export at the largest size you'll need, so you aren't scaling raster lettering up later.
Taking Arched Lettering into a Motion Pipeline
If the lettering is headed for a video or motion project, decide early whether it needs to be animated as type or as artwork.
- If the type needs to stay live or animate along a path, build it in After Effects instead rather than arching it in Procreate.
- If the lettering is illustrated artwork, Procreate is the right place. Export the arch as a transparent PNG, or export each letter as its own layer from the manual method, and bring it into After Effects or Nuke for compositing.
- Keep layers named and separated. Background, outline, fill, and highlights on separate layers make it much easier to animate or relight later.
Where Styleframe Fits
Once you have a finished piece of arched lettering, Styleframe can help turn it into motion without replacing your compositing workflow. Styleframe is an AI video and motion tool built for artistic control, not a one-click generator. You can use your Procreate frames as keyframes in Frames-to-Video, so the lettering you designed anchors the start and end of a shot. Restyle and Ink-and-Paint apply the look of a reference image or clip to other footage or artwork. 2D-to-3D and Turntable can give flat lettering depth, Remove Background isolates elements, and 4K Upscale prepares the output for delivery.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can refine a result without throwing away earlier work. Styleframe exports image sequences, so the results drop straight into After Effects or Nuke, and an After Effects plugin is on the way. You keep your existing compositing pipeline, and Styleframe handles the stylized generation step.
FAQ
Can Procreate arch text without rasterizing it? No. Warp and Liquify both convert text to pixels. Duplicate the text layer first so you can change the wording later.
What's the easiest way to get a symmetrical arch? Draw a QuickShape arc as a guide, use Warp with Advanced Mesh, and mirror your adjustments on both sides of the center.
Which method gives the sharpest result? Arching in a vector app and importing the result keeps edges sharper than Liquify, which softens the text because it rasterizes it. Working at a high canvas resolution helps with any method.
Should I arch text in Procreate or After Effects? If the text must stay editable or animate along a path, use After Effects. If it's illustrated lettering where the shapes matter more than the font, use Procreate and export it for compositing.