How to Animate a Tiktok on Procreate
StyleFrame Team8 min read
Open Procreate, create a 1080×1920 (9:16) canvas, turn on Animation Assist under Canvas, and draw your motion as frames, with each layer acting as one frame. Set the frame rate and onion-skin range, preview the loop, then export an Animated MP4 (or GIF/PNG for transparency) and upload it to TikTok. Procreate has no audio track, so add sound inside TikTok or in your editor before posting.
Set Up the Canvas for TikTok
Start with the delivery format, because Procreate's frame count depends on canvas size and available memory. Larger canvases give you fewer layers, and in Animation Assist every frame is a layer.
- Canvas size: 1080×1920 px is the standard vertical TikTok frame. Going larger gives you room to reframe later, but it limits how many frames you can draw.
- Safe zones: TikTok's interface covers the bottom of the frame (caption, handle) and the right edge (like, comment, share buttons). Keep faces, text, and the main action away from those areas. Drag in a few guide shapes on a top layer and delete them before export.
- Color profile: Stick with sRGB unless you have a reason not to. TikTok compresses and converts anyway, and a wide-gamut export can shift when it's re-encoded.
- Frame rate plan: Hand-drawn motion usually reads well at a lower frame rate such as 12 fps (on twos). Animating at a low frame rate is normal and gives the work that drawn look.
Step-by-Step: Animating in Procreate's Animation Assist
1. Turn on Animation Assist
Go to Actions → Canvas and toggle Animation Assist. A timeline appears at the bottom of the canvas with your existing layers converted into frames. Tap Settings to adjust frame rate, onion-skin frames, onion-skin opacity, and playback mode (such as Loop and Ping-Pong).
2. Block out your key poses
Treat this like timing in After Effects: set keys first, in-betweens second. Draw your extremes, such as the start pose, the peak of the action, and the settle, on separate frames. Doing this first lets you check the arc and silhouette before you commit to clean-up.
For TikTok, the first frames matter most. Get a readable pose and a hint of motion within the first second, because that's where a viewer decides to keep watching.
3. Use a background layer
Tap a layer's Background toggle in the Animation Assist timeline to hold it across every frame. Use this for a flat color, a sketched environment, or a reference photo. Use Foreground for overlays like grain, outlines, or a logo that need to sit on top of every frame.
If you plan to composite later, leave the background empty or off so you can export with transparency.
4. Add in-betweens with onion skin
Increase the onion-skin range to see the frames before and after the one you're drawing. For fast actions, one or two frames on each side is enough. For slow, flowing movement like hair or fabric, increase the range so you can follow the arc.
Two habits keep Procreate frame-by-frame work clean:
- Name or color-tag layers by action (for example, "wave_01") so you can find them when the timeline gets long.
- Draw each frame on a single layer. Splitting a frame into line and color layers means grouping them, which is possible, but it complicates edits.
5. Set timing with hold duration
Each frame has a Hold Duration setting. Use it to stretch a pose across extra frames instead of duplicating layers. Holds are helpful for anticipation and for letting the final pose land before the loop restarts, which saves layer count too.
6. Check the loop
If the video is meant to loop, as many TikTok animations are, match your last frame to your first. Use Loop playback and watch the join, not just the action. Ping-Pong playback can disguise a mismatched join, but it only works if the motion reads naturally in reverse.
7. Export and upload
Open Actions → Share and pick a format:
- Animated MP4: Best for uploading directly to TikTok.
- Animated GIF: Fine for stickers and previews, but limited in color.
- Animated PNG / PNG sequence: Useful when you need transparency or plan to composite elsewhere.
- Animated HEVC: Another video option; check that your target app handles it.
Save to Photos or Files, then upload through TikTok. Add sound via TikTok's library or your own audio, since the Procreate export is silent.
The TikTok Profile Video Variant
TikTok lets you add a short profile video in place of a still photo. A common Procreate approach for that is:
- Shoot a short run of photos from a tripod with consistent lighting, using a timer or interval app so framing stays stable.
- Import the photos into Procreate as frames, one per layer.
- Draw over them: add expressions, sparkles, outlines, hand-lettered text, or exaggerated motion.
- Set a low frame rate, around 6–12 fps, for a stop-motion feel.
- Export an Animated MP4 and select it in Edit Profile.
The consistent shooting setup does most of the work. If the camera or light drifts between photos, the result flickers in a way that's hard to fix afterward.
Where Procreate Hits Its Limits
Procreate is a strong sketchbook with a simple frame-by-frame timeline, but it is not a full animation or compositing environment. Experienced motion designers will run into a few limits:
- Layer ceiling: Every frame is a layer, so frame count is bounded by canvas size and device memory. A 1080×1920 canvas allows far fewer frames than a small square one.
- No audio: You can't sync to a beat or voiceover inside the app.
- No per-frame layer stacks: Each frame is one flat layer, unless you group layers, so shading and effects have to be baked in.
- No keyframe interpolation: There are no curves, parenting, or rigs. Everything is drawn or duplicated.
- Limited effects: Blur, glow, and color grading are basic compared with a compositor.
None of that is a reason to avoid it. It's a reason to treat Procreate as the drawing stage, then finish elsewhere.
Taking Procreate Animation Into Your Pipeline
If the TikTok is part of a client campaign or a larger piece, export clean and finish in a proper compositor.
- Export frames, not just video: A PNG sequence or transparent export lets you keep alpha and avoid compression artifacts at the start of the pipeline.
- Import into After Effects or Premiere Pro: Set the footage's frame rate to match your Procreate rate (such as 12 fps) and place it in a 30 fps comp. Interpret-footage settings are important here, as mismatched rates produce uneven holds.
- Add the layers Procreate can't: Sound design, camera moves, parallax, grain, text animation, and color grading are far faster in After Effects.
- Reformat for delivery: Render 1080×1920 H.264 at a reasonable bitrate, then check it on a phone. TikTok will recompress it, so avoid very fine linework or heavy noise that turns to mush.
Cinema 4D, Blender, and Nuke come in if the drawn animation is meant to sit on a 3D surface or in a tracked shot. A transparent frame sequence from Procreate works as a texture or an element in those tools just as well as in After Effects.
Where Styleframe Fits Alongside Procreate
Hand-drawn frames are expensive in time, and the part of the process that eats the most hours is usually in-betweening and restyling. is an AI video and motion tool built for artistic control, and it can sit beside Procreate for those stages. It isn't a replacement for drawing your key poses.
A practical way to use it:
- Keyframes in, motion out: Export your hero poses from Procreate and use Frames-to-Video to generate the movement between them. The generation is driven by your own keyframes and references, so the drawing remains yours rather than a prompt result.
- Carry your style across shots: Restyle and Ink-and-Paint use reference images or video clips to transfer a look. If you've established a line and color treatment in Procreate, you can apply it to other footage, such as a filmed clip of yourself, so a series of TikToks stays visually consistent.
- Cleanup and finishing: Remove Background isolates a subject for compositing, and 4K Upscale prepares output for production use. 2D-to-3D and Turntable can help when a character needs to rotate or appear from another angle.
- Iterate without starting over: Iteration is non-destructive, so you can try variations of a shot without losing earlier versions.
Output comes out as image sequences, which drop into After Effects or Nuke the same way a Procreate PNG sequence does. An After Effects plugin is on the way, but the current workflow already fits a normal comp-based pipeline. You keep your compositing control and use Styleframe for the generative stages you steer.
Quick Tips for Better Procreate TikToks
- Keep it short. Three to six seconds of strong looping motion beats fifteen seconds of weak frames.
- Simplify the design. Bold shapes and limited palettes survive compression and small screens.
- Exaggerate. Subtle motion disappears on a phone, so push the squash, stretch, and overlap.
- Test on-device. Check your safe zones and legibility on an actual phone before posting.
- Archive the source. Keep the .procreate file and your frame exports. You'll want them when a client asks for a different aspect ratio.
FAQ
Can you animate directly in Procreate? Yes. Animation Assist adds a frame-based timeline with onion skinning, playback modes, and export.
What size should a TikTok animation be? 1080×1920 px (9:16) is the standard, with key content kept clear of the interface areas.
Can I add music in Procreate? No. Add audio in TikTok or in an editor such as Premiere Pro or After Effects.
Can I use a Procreate animation in After Effects? Yes. Export a PNG sequence or video, import it, match the frame rate, and build your comp around it.